Fanttik C8 APEX Dash Cam

1. SPECIFICATIONS

Product Name: Dash Cam

Product Model: C8 APEX (64G) / C8 APEX GT (128G)

Size: 106*37*26mm

Storage: Built-in eMMC high speed flash, loop recording

Operating Temperature: -20°C to 70°C (-4°F to 158°F)

2. PACKAGE CONTENTS

• Dash Cam x1
• Bracket x1
• Installation Tool x1
• Electrostatic Sticker x2
• Power Cable 3.5m x1
• 3M Adhesive x2
• User Guide
• USB Charger (5V2.4A) x1

3. PRODUCT OVERVIEW

A visual representation of the Fanttik C8 APEX Dash Cam and its components. It shows the device from different angles, highlighting: 1. Working Indicator light, 2. Microphone (MIC), 3. Bracket attachment point, 4. Lens, 5. Type-C Interface port, and 6. Button.

4. LED INDICATOR INSTRUCTION

5. SPECIFICATION

6. INSTALLATION

There are two methods to connect and install the recorder:

1. Charge via cigarette lighter: Insert the car charger into the cigarette lighter and connect it to the recorder using the 3.5-meter power cord. Most of the power cord can be hidden within the car's interior trim for a neat installation.
2. Connecting the Hardwire kit cable: This method connects to the fuse box for power, enabling parking monitoring. It uses a step-down wire and the dark wire for a cleaner look. This wiring is more complex. To avoid vehicle damage from misoperation, it is recommended to have this installation done by a professional car service point.

Note: The Hardwire kit must be purchased separately or as part of a package that includes it.

The following steps describe the installation using the cigarette lighter method:

1. Prepare the windshield: Wipe the front windshield clean with a soft cloth to ensure the bracket adheres securely.
2. Attach the recorder to the bracket: Insert the recorder into the bracket sleeve. A magnet inside the bracket secures the recorder.
3. Connect power:
   • Insert the car charger into the cigarette lighter and connect it to the recorder using the Type-C power cable.
   • Once the car is started, the recorder will power on automatically, emit a "Hello, Fanttik" sound, and begin recording.
4. Determine installation position and adjust lens angle:
   • Use the FanttikCam mobile app to connect to the recorder. Navigate to "Device > Enter the Recorder" and then to the "Now/Back" interface. A level indicator will be displayed on the screen, showing horizontal and vertical midlines.
   • Position the recorder in the center of the front windshield. Ensure the bottom of the bracket is attached to the windshield, the lens faces outward, and the power interface is on the right. Align the car's front centerline with the vertical midline on the screen. Adjust the recorder and bracket up/down until the ground plane's disappearing line aligns with the horizontal centerline on the screen.

Notice: Incorrect positioning based on center lines may affect some recorder functions.

5. Fix the recorder:
   • After determining the final position, apply the electrostatic sticker to the windshield.
   • Peel the 3M adhesive film from the bracket and attach the bracket to the center of the electrostatic sticker.

Note: Pay close attention to the direction and position when applying the 3M adhesive, as it is a one-time item. Ensure the recorder is mounted at the correct shooting angle.

6. Wiring: Route the power cord from the cigarette lighter to the recorder's mounting location, as shown in the wiring diagram. Use the included spudger tool to tuck the power cord neatly into the plastic car trim.

Wiring Diagram Description: An illustration of a car's interior dashboard and windshield area, showing the power cord path from the cigarette lighter socket, along the car's interior trim (indicated by dashed lines), to the "Ideal mount area" on the windshield. It also shows a "Tuck in cable" instruction.

7. APP PROGRAM INSTRUCTIONS

Install FanttikCam APP:

Download the "FanttikCam" app from the iOS App Store or Android Google Play Store.

Pair Smart Phone to Dash Cam:

1. Ensure the Dash Cam and your mobile phone are within 2.5 meters of each other.
2. Launch the FanttikCam App and tap "Device > Connect new devices".
3. Select your Fanttik Dash Cam from the network list.
   • For Android: The app will automatically search for the Dash Cam network.
   • For iOS: Enable WLAN in your phone's "Settings > WLAN".
   The Dash Cam's default Wi-Fi name (SSID) is typically "WIFI_Fanttik_C8_Apex_XXXX" or "WIFI_Fanttik_C8_Apex_GT_XXXX".
4. Enter the default password: '1234567890'.
5. Once connected within the FanttikCam app, wait a few seconds for the preview screen to appear.
6. You can change the Wi-Fi name and password within the app settings. If you forget the password, press and hold the button on the recorder for approximately 6 seconds to restore factory settings. The factory password is 1234567890.

Preview:

1. Open the FanttikCam App and add your Dash Cam.
2. Navigate to the "Device > Entering" tab to access the preview page.
3. Rotate your smartphone or tap the expand icon (::) to switch the preview screen to landscape mode.
4. Use the timeline at the bottom of the screen to select a starting point for your desired recording preview. Tap the thumbnail or wait 5 seconds for buffering to watch the recorded history.

Download Video Files:

1. On the preview screen timeline, drag the left/right handles to set the starting point of the recording you wish to download. Tap the thumbnail to confirm your selection or wait 5 seconds for buffering to enter the download screen.
2. Tap the download icon (represented by an upward arrow) from the preview screen to initiate the download interface.
3. After the video finishes downloading, click "Complete".
4. You can choose to open SR (Super Resolution) to download videos, which may offer more detail.
5. The recorder supports downloading video clips ranging from a minimum of 5 seconds to a maximum of 3 minutes.
6. Downloaded videos are saved in the Fanttik App's local album and are also synchronized to your mobile phone's photo album. You can access them via "Me > Local Album" in the Fanttik App or through your phone's gallery.

Edit and Share Photos:

1. In the FanttikCam App, go to "Me > Local Albums". Select the photos you wish to edit and share, then tap "Share".
2. The editing interface allows you to apply filters, cut, add subtitles, and crop the image.
3. Once editing is complete, tap "Done" in the upper right corner to proceed to the sharing interface. You can share edited photos to platforms like Facebook, Twitter, and TikTok.

Edit and Share Videos:

1. In the FanttikCam App, navigate to "Me > Local Albums". Select the videos you want to edit and share, then tap "Share".
2. The editing interface includes options like "Crop", "SR Style", and "Soundtrack". You can cut video clips, add soundtracks, and apply SR effects.
   • Crop: Drag the white borders to select a video segment. Clips can be between 5 seconds and 30 seconds long.
   • SR Style: Choose from available SR styles or select "None" for no effect. If you choose an SR style and check "Set as default SR", all future videos will use that style.
   • Soundtrack: Select from a variety of available soundtracks.
3. After editing, check "Original Quality" to maintain video compression settings, then tap "Confirm". If "Original Quality" is not checked, the video may be compressed, potentially reducing quality.
4. After the video is synthesized, you can share it to various social media platforms.

8. FUNCTION INTRODUCTION

Parking Monitoring:

When connected via the hardwire kit, the recorder can monitor your vehicle while parked and turned off. This feature allows you to review footage to check for any collisions or incidents that occurred during parking.

Note: The hardwire kit is sold separately. Connecting to the fuse box is complex and recommended to be done by a professional to prevent damage.

The default parking monitoring mode is "time-lapse recording". Supported modes include: "time-lapse recording", "normal recording", and "sleep".

• Declare:
  • If "time-lapse recording" or "normal recording" is selected for parking monitoring, the Wi-Fi will turn off after 15 minutes of parking.
  • Collision sensitivity can be adjusted in "Setting Collision Sensitivity".
  • In "normal recording" mode, if a collision occurs within the set duration, the recorder will continue parking monitoring and generate associated photos and videos.
  • In "time-lapse video recording" mode, a collision within the recording time will also trigger an associated photo without exiting parking monitoring.
  • Parking surveillance duration can be set in "Setting the recording duration of parking surveillance". The default is "24 hours", with options for "15 minutes", "1 hour", "6 hours", "24 hours", and "Not shut down".
  • The recorder will automatically shut down to protect the vehicle battery if the battery voltage drops below a set protection value. The default protection value is "12V", with selectable options of "12.4V", "12V", and "11.8V". A lower protection voltage allows for longer parking monitoring recording time.

Collision Latch:

When the recorder is active, it detects collisions (e.g., emergency braking) and triggers an emergency photo and video, stored separately and not overwritten by normal recording.

• Higher collision sensitivity makes triggering photos easier; lower sensitivity makes it less likely.
• Default sensitivity is "Medium", with options: "High", "Medium", "Low", and "Off".
• Default emergency video duration is "10s", with options: "10s", "20s", and "30s".

ADAS Intelligent Driving Assistance:

This system includes a "front vehicle start" alert. For optimal performance, install the dashcam near the center of the windshield. If not needed, this feature can be turned off.

• Declare: If you change the installation position or lens angle, re-calibrate the ADAS system for accuracy.
  • Calibration Reset Method: Connect the mobile app, go to the preview interface, tap the settings icon, select "Recorder Settings", then "ADAS intelligent auxiliary reminder > ADAS effect reset", and follow on-screen prompts for position adjustment and calibration.

Voice Command:

Enabled by default and can be turned off. Only English is supported. Commands include: "Take photo", "Turn on audio", "Turn off audio".

Recording:

Recording is off by default and can be activated via voice command or the app. If the microphone is enabled, audio will be recorded with video. If disabled, no audio will be captured.

Switch Video Resolution:

Higher resolution provides clearer video but shorter recording time. Lower resolution offers less clarity but longer recording time.

• Default resolution is 4K (2160P). Options include: 4K (2160P), 2K (1600P), and Full HD (1080P).

SR (Super Resolution):

Note: The real-time effect of SR is viewed in the preview, not the final output. SR data is for reference only, and its accuracy is influenced by the recorder's installation position.

Format Memory:

It is recommended to format the memory every 1-3 months to ensure optimal performance. Formatting erases all video and photo files, so back up data beforehand.

1. Connect the recorder to the Fanttik mobile app.
2. Navigate to "Device > Enter Recorder" and then to the "Now/Back" interface.
3. Go to "More Settings" in the quick menu, then "Recorder Settings", "Recorder Storage Management", and click "Format".

Upgrade Firmware:

• Via App: When a new firmware version is released, connect the recorder to the Fanttik App. An upgrade prompt will appear, guiding you through the process. If you skip the prompt, it will reappear upon reconnection. You can also manually check for updates via "Me > About Fanttik > New firmware available".
• Via eMMC Memory:
  1. With the recorder turned off, connect it to a computer using the Type-C data cable.
  2. Download and decompress the firmware upgrade package. Copy the decompressed update folder to the root directory of the recorder's built-in memory.

  Note: When unzipping, select "Extract to the current folder". Copy the entire update folder, not individual files.

  3. Power on the recorder; it will automatically upgrade and complete after restarting. Do not disconnect power during the upgrade.

Other Settings:

• Time Watermark: Enable to display time and recorder model on screen; disable to hide them.
• GPS Speed Display: Enable to show GPS real-time speed on screen; disable to hide it.
• Image Flipping: Disabled by default. Advised not to enable unless in special circumstances.
• H.265 Video Encoding: Enables higher definition recording but may have requirements for mobile phone configuration.
• Power-on Prompt Sound: Enable for startup/shutdown sounds; disable for silence. The startup beep is on by default.

9. WARRANTY INFO

Your Warranty Includes:

• 12-Month Coverage: Within 12 months of purchase, Fanttik provides timely and effective online after-sales service. Defective products (due to manufacturing faults) will be repaired or replaced during the warranty period.

How to Return Your Fanttik Product:

• Contact support@fanttik.com with your order number.
• If your purchase was fulfilled by Amazon, please utilize Amazon's 30-day return service.

Contact Information:

• Website: www.fanttik.com
• Email: support@fanttik.com
• Manufacturer: METASEE LLC
• Address: 5205 Broadway #634 Pearland Texas 77581

Compliance Information:

• Made in China
• FCC, CE (10) logos present.

Federal Communications Commission (FCC) Statement:

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) it must not cause harmful interference, and (2) it must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, designed to provide reasonable protection against harmful interference in residential installations. It generates, uses, and can radiate radio frequency energy. If not installed and used per instructions, it may cause harmful interference to radio communications. Interference is not guaranteed to not occur in a specific installation. If interference occurs (determined by turning the device off/on), users are encouraged to:

• Reorient or relocate the receiving antenna.
• Increase separation between the equipment and receiver.
• Connect the equipment to a different circuit than the receiver.
• Consult a dealer or experienced radio/TV technician.

Warning: Changes or modifications not expressly approved by METASEE LLC may void FCC authorization.

Note: The manufacturer is not responsible for radio/TV interference caused by unauthorized modifications. Such modifications can void the user's authority to operate the equipment.

RF Exposure Statement:

The transmitter must not be co-located or operated with any other antenna or transmitter. This equipment complies with FCC RF radiation exposure limits for an uncontrolled environment. It should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body.