Instructions for LabelMark models including: Ezcad2.12.2, USBLMCV2, BJJCZ Device, USBLMCV2 Marking Machine, USBLMCV2, Marking Machine, Machine

打标机驱动安装

AutoBVT

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized



File Info : application/pdf, 10 Pages, 1.06MB

Document Document

 Marking machine driver installation
 irst step ( zcad.2.12.2\win7 win8 win10 X64drive\winxp win7 32drive). Will U disk of the following file (Ezcad.2.12.2 \ win7 win8 win10 winb win7 32drive) copy to the hard disk.
 The second step ( zcad.2.12.2\win7 win8 win10 X64drive\winxp win7 32drive) 
Will be (Ezcad.2.12.2 win7 win8 win10 X64drive \ winxp win7 32drive) 3 compressed package file extract.
 Third step  windows  32  64  Check the computer's Windows system for 32-bit or 64-bit operating system
1

 windows10 32  This computer is windows10 32-bit operating system
 winxp win7 32 drive  Corresponding to the driver for the hard drive inside the winxp win7 32 drive
 The fourth step  This pc() anage  Install the driver, click This pc right, open Manage
2

The fifth step  USBLMCV2 Select the driver USBLMCV2 not loaded  USBLMCV2, USB   If USBLMCV2 is not displayed, connect the computer to the marking cable with the USB cable and turn on the key switch and button
 Right click to select Update Driver Software
3

 Step 6   Browse my computer for driver software
 Browse
4

 Step 7  winxp win 32 driver  Choose to copy to the hard drive winxp win 32 driver folder  windows 64  win7 win8 win10 X64driver Tips: If the computer is windows 64-bit operating system, please select win7 win8 win10 X64driver
 Next
5

lnstalling Driver Software...  Close The installation is complete and click Close
6

 BJJCZ Device, The Device Manager displays the driver name BJJCZ Device, indicating that the installation driver was successful
 Step 8  Ezcad2.12.1 Open the hard disk of Ezcad2.12.1
 Ezcad2 Open Ezcad2
7

 Select l agree
8

 Congratulations on your successful installation
 Can not find dongle! Software will work at demo state.  USB  If you can not find dongle! Software will work at demo state. Note that you have not installed the driver or the marking machine is not open, or the computer and the marking machine with USB cable is not connected.
9

10