Rebel URZ3485-3 LED Floodlight

Safety Instructions

• Read the operation instruction carefully before first use and keep it for future reference. If there are any doubts concerning correct installation, please consult a qualified specialist.
• If the device or any of its part is damaged, do not use it and unplug it from the power source. Do not repair the device yourself. Contact an authorized service point for check-up/repair.
• Prior to any maintenance services, disconnect power supply and let the device cool down.
• Do not cover the device.
• WARNING: Do not look directly at the LED light beam!
• Clean the device with a soft and dry cloth. Do not use chemical detergents.
• Failure to follow these instructions may result in fire, burns, electrical shock, physical injury, and other damage.
• WARNING: Device may heat up to a higher temperature. Do not touch the device when it's hot.
• Before connecting the device to the power supply socket, make sure the voltage indicated on the appliance corresponds to the voltage in the power supply socket.

Features

• The device belongs to the group of energy-efficient products.
• Minimal distance of a light fixture (its light source) from the spots and objects that it's illuminating: 0.5 m.
• This device is built in a way that it is impossible to open it. Repair by user is not allowed.

Mounting

Read the manual before mounting. Mounting should be performed by an appropriately qualified person. Check for proper mechanical fastening and connection to electrical power prior to first use.

1. Remove the mounting bracket from the LED floodlight. Drill holes in the wall and screw the bracket onto the wall using suitable plastic wall plugs and screws. Check that the bracket is securely fitted on the wall.
   Note: Do not at this stage re-attach the floodlight to the bracket.
2. Connect the power cords:
   • Brown wire (ACL) of the floodlight with the Live brown or red wire of the electrical wiring.
   • Blue wire (ACN) of the floodlight with the Neutral blue or black wire of the electrical wiring.
   • Yellow-green wire of the floodlight with the Earth wire of the electrical wiring.
3. Re-attach the floodlight to the bracket and secure the cable to the wall using suitable clips. Ensure that the cable is not touching the body of the floodlight, and that there is sufficient slack in the cable to allow the floodlight to be tilted and adjusted as required. This should be done by grasping the metal body of the floodlight, not its rear wiring box.

Diagram 1 (Mounting & Wiring): Illustrates the floodlight unit, its mounting bracket, and a junction box with clearly marked terminals for Live (L), Neutral (N), and Earth (PE/GND) connections. It shows the correct wiring: brown wire to Live, blue wire to Neutral, and yellow-green wire to Earth.

Diagram 2 (Mounting Angles): Depicts the floodlight mounted on a wall, showing how it can be tilted up or down for adjustment. It also shows the power cable being secured to the wall with clips.

Installation Tips Diagrams: One diagram shows the floodlight installed under an eave for outdoor protection, while another illustrates direct sunlight hitting the unit, indicating this should be avoided.

Tips:

• Do not install when it is raining.
• The unit can be installed only horizontally.
• For outdoor installation, a location under eaves is preferable.
• Do not allow sunlight to fall directly on the front of the unit.

Technical Specifications

Disposal Information

Correct Disposal of This Product (Waste Electrical & Electronic Equipment)

It is forbidden to dispose of equipment waste marked with the symbol of a crossed-out trash bin together with other waste. This equipment is subject to collection and recycling. The harmful substances it contains can cause environmental pollution and pose a threat to human health. Users should contact their point of sale or local authority for information on where and how to dispose of this product safely for the environment. Businesses should contact their supplier and check the terms of the purchase agreement. This product should not be disposed of with municipal waste. Such equipment is subject to selective collection and recycling. The harmful substances it contains may cause environmental pollution and pose a threat to life and human health.