Electric centrifugal juicer

I. Safety Precautions

• Carefully read the user's manual before putting the appliance into operation, save the manual for future use. Consider the instructions as part of the appliance and provide them to other users.
• Check that the voltage on the type label corresponds to your electric power socket.
• Plug the power cord into a correctly connected and grounded socket.
• Do not insert or pull the power plug with wet hands or by pulling the cord.
• The product is intended for home use and similar environments (shops, offices, hotels, etc.), not for commercial use.
• This appliance must not be used by children. Keep the device and its cord out of reach of children. Persons with reduced physical or mental abilities, or lack of experience, may use it only if supervised or instructed on safe usage and potential dangers. Children must not play with the appliance.
• If the power cord is damaged, it must be replaced by the manufacturer, their service technician, or a similarly qualified person to prevent a dangerous situation.
• Never use the appliance if the power cord or plug is damaged, if it is not functioning correctly, if it has fallen and been damaged, or if it has fallen into water. Take it to a professional service centre for safety and function verification.
• Always disconnect the appliance from the power socket when leaving it unattended, before cleaning, or disassembling.
• Do not leave the appliance in operation without supervision; supervise it throughout food preparation.
• Keep pets, plants, and insects away from the appliance during operation.
• Never submerge the drive unit in water or wash it under running water.
• Use the appliance only in its working position, in places where it cannot be knocked over, at a sufficient distance from heat sources (stoves, cookers, etc.), and away from wet surfaces (sinks, wash basins, etc.).
• Do not use the appliance if the rotary sieve is damaged, shows visible cracks or tears, or is torn.
• Use the appliance only with accessories designed for this model. Using other accessories may be dangerous.
• Correctly placing the lid on the appliance releases the safety lock, allowing the appliance to be turned on.
• Before preparation, remove any packaging from food (e.g., paper, PE bag, etc.).
• Do not turn on the appliance without ingredients.
• Do not insert accessories into any body orifice.
• Never put fingers or utensils (fork, knife, spoon, etc.) into the feeding hole. Use the provided pusher for this purpose.
• Before plugging into the mains, ensure the regulator is in position 0 (OFF).
• After use and before any maintenance, always turn off and unplug the appliance.
• Never use the appliance without the pulp container fitted.
• Do not process frozen food.
• If pulp excessively accumulates on the sieve or lid, turn off the appliance and clean the part.
• Before removing the lid, turn off the appliance and wait for the rotating sieve to stop completely.
• Ensure the power cord does not contact rotating parts of the appliance.
• Regularly check the condition of the power supply cord.
• Do not coil the power cord around the appliance to increase its lifespan.
• Do not let the power cord hang over the edge of a table or worktop where children can reach it.
• The power cord must not be damaged by sharp or hot objects, open flame, immersed in water, or bent over sharp edges.
• If an extension cord is needed, ensure it is undamaged and complies with valid standards.
• Use this appliance only for its intended purpose as described in these instructions.
• The producer is not responsible for damage or injuries caused by improper use or failure to comply with safety warnings.

II. Features of the Device (Fig. 1)

The appliance consists of the following parts:

• A – Propulsion unit
• A1 – Switch/speed selector
• A2 – Propulsion shaft
• A3 – Closures
• A4 – Supply cord
• B – Container with a drain
• B1 – Safety lock
• C – Sieve
• D – Lid
• D1 – Feeding opening
• E – Stamper (pusher)
• F – Pulp collector
• G – Juice container
• G1 – Lid with foam separator
• H – Cleaning brush

III. Preparation and Use

Assembly (Fig. 1)

• Remove all packaging material and accessories. Remove any adhesive foils, stickers, or paper from the appliance. Wash all parts that come into contact with food in hot, soapy water, rinse thoroughly with clean water, and dry or let air dry before first use.
• Insert the pulp container F into its holder.
• Slide container B into the propulsion unit A until it stops.
• Place sieve C onto the propulsion shaft A2 and secure it with slight pressure.
• Place lid D onto container B and secure it by snapping closures A3 (first slide the upper parts of the closures onto the protrusions in the lid's grooves, then snap the bottom parts).
• Reverse the procedure for removing individual parts.
• Note: The appliance will not turn on if the lid is not placed and secured correctly.

Food Preparation

• The appliance is designed for processing almost all types of fruits and vegetables.
• Not suitable for processing: Currants, bananas, avocados, figs, mangoes, etc.
• Always use fresh, ripe fruits and vegetables for more juice.
• Remove stems (e.g., grape stems) and leaves.
• Wash fruits or vegetables thoroughly.
• Cut larger items into smaller pieces.
• Remove pits (e.g., from plums, apricots, cherries).
• Remove thick skin (e.g., from melons, pineapples, cucumbers, potatoes, beets, celery).
• Peel citrus fruits and remove the white pulp and seeds; otherwise, the juice may have a bitter taste.
• Foods with thin skin (e.g., apples, pears, carrots, radish, parsley) do not need peeling.

Use of the Appliance

• Place the assembled juicer on a firm, flat, and dry surface (refer to Section I. SAFETY PRECAUTIONS).
• Plug the supply cord A4 into the electrical outlet.
• Place container G (without lid G1) or another suitable container under the spout to collect juice.
• Turn on the appliance by rotating the speed selector A1 to the desired position based on the food being processed.
• For soft/juicy food (e.g., apples, citrus fruits, tomatoes): Turn the selector to position 1 (low speed).
• For food with lower juice content (e.g., carrots, parsley): Choose a higher speed.
• For hard food (e.g., celery): Turn the regulator to position 5 (high speed).
• Gradually feed prepared food into the feeding opening D1, gently pushing with the stamper E. Do not push too hard on the stamper, as this may affect juice quality or cause the appliance to stop.
• After finishing, turn off the appliance, wait until the rotating sieve stops completely, and unplug the appliance from the electrical outlet.
• Before pouring the juice, place lid G1 on container G to catch foam.

Notes and Good Tips

Notes

• It is recommended to occasionally interrupt operation to remove pulp that has collected on the sieve or lid (see Section I. SAFETY PRECAUTIONS).
• Preparation time depends on the quantity, type, and quality of the food used and ranges from tens of seconds.
• Maximum continuous operation time is 2 minutes. After this, take a break of approximately 2 minutes for the drive unit to cool down.
• If you need to empty the pulp container F during juicing, first turn off the appliance. Lift, tilt, and remove the container. Replace it in reverse order after emptying.
• The appliance features feedback regulation that maintains set motor revolutions regardless of load. If the load is significantly reduced, revolutions may fluctuate briefly; this is normal and not a reason for complaint.
• If the appliance becomes stuck, turn it off immediately and clean it.

Good Tips

• For more juice, push soft foods slowly.
• To preserve maximum vitamins, consume the juice soon after preparation.
• If juice needs to be stored for several hours, refrigerate it. Juice stays fresher longer if a few drops of lemon juice are added.
• Dilute juice for children with an equal amount of water.

IV. Maintenance

• Always turn off and unplug the appliance from the electrical outlet before any maintenance or cleaning!
• Do not use abrasive or aggressive cleaning agents (e.g., sharp objects, scrapers, diluents, or other solvents).
• Clean the propulsion unit A and shaft A2 with a soft, damp cloth.
• Wash other removable accessories immediately after use in hot water with soap, rinse with clean water, and let dry (do not use a dishwasher).
• Exercise caution when cleaning the sieve to avoid injury. Sieve C can be easily cleaned with the provided brush H.
• Some fruits may discolor accessories; this does not affect the appliance's function and the discoloration usually disappears over time.
• Never dry plastic parts over a heat source (e.g., stove, electric/gas cooker).

V. Storage

• Store the appliance in a clean, safe, and dry place, out of reach of children and persons not legally competent.

VI. Environment

• Symbols on parts and documentation indicate that electrical/electronic products must not be disposed of with municipal waste.
• Hand over used products at designated collection points for free disposal.
• Proper disposal helps conserve natural resources and prevents negative environmental and health impacts.
• Contact local authorities or collection sites for more details. Improper disposal may incur fines according to national regulations.
• To permanently disable the appliance, cut the power cord after unplugging it from the mains.

VII. Technical Data

• Voltage (V): Specified on the type label
• Input power (W): Specified on the type label
• Weight (kg) approx.: 4.65
• Volume of the bowl (l): 0.70
• The product complies with EU directives regarding electromagnetic compatibility (2004/108/ES) and electrical safety (2006/95/ES).
• It also complies with Regulation (EC) No. 1935/2004 on materials and articles intended to come into contact with food.
• The manufacturer reserves the right to make minor deviations from the standard design that do not affect the product's function.
• HOUSEHOLD USE ONLY
• DO NOT IMMERSE IN WATER OR OTHER LIQUIDS
• Plastic Bag Warning: Keep this plastic bag away from babies and children. Do not use in cribs, beds, carriages, or playpens. This bag is not a toy. Risk of suffocation. Keep PE bags away from children.

Warranty Information

For warranty claims, present proof of purchase and the warranty list, describing the defect. Contact authorized service centers. Clean and pack the product securely for transport. Soiled products are not accepted for repair.

The warranty period is 24 months from the date of purchase.