Brink Ease 200 Enthalpy
Technical Data Sheet
1 Scope of delivery
Before starting the installation of the heat recovery appliance, check that it has been supplied in complete and undamaged condition.
The delivery size of the heat recovery appliance type Ease 200 Enthalpy consists of the following components:
- Heat recovery appliance.
- Wall mounting installation kit consisting of:
- wall bracket.
- 2 x rubber strip.
- Installation quick guide.
- Drilling and mounting template.
A diagram shows the heat recovery appliance with numbered components: 1. Heat recovery appliance, 2. Wall mounting bracket, 3. Rubber strips, 4. Drilling and mounting template.
2 Technical specifications
2.1 Technical information
| Parameter | Value |
|---|---|
| Ease 200 Enthalpy | |
| Supply voltage [V/Hz] | 230V/50Hz |
| Dimensions (wxhxd) [mm] | 560 x 660 x 315 |
| Duct diameter [mm] | Ø 125 |
| Weight [kg] | 20 |
| Filter class | ISO Coarse 60% |
| Fan setting | 0, 1, 2, 3, max |
| Airflow m³/h (factory set values) | 50, 75, 100, 150, 200 |
| Permissible resistance of duct system [Pa] | 3, 9, 7, 21, 13, 38, 28, 84, 50, 150 |
| Rated power [W] | 8.5, 9.2, 11.0, 12.8, 17.0, 20.7, 39.6, 50.2, 77.5, 100.4 |
| Rated current [A] | 0.12, 0.13, 0.13, 0.15, 0.17, 0.21, 0.35, 0.43, 0.64, 0.82 |
| Cos φ | 0.310, 0.316, 0.372, 0.383, 0.425, 0.437, 0.496, 0.507, 0.528, 0.535 |
| Max rated current [A] | 1.5 |
| Permitted ambient conditions | Between +2°C and +40°C. RH <90% non condensing |
| Storage and transport conditions | Between -20°C and +45°C. RH <90% non condensing |
| Permitted air temperature through appliance | Between -20°C and +45°C |
Sound power
| Ventilation capacity [m³/h] | Static pressure [Pa] | 80 | 120 | 160 | 200 |
|---|---|---|---|---|---|
| Sound power level Lw(A) | 25 | 50 | 75 | 100 | |
| Casing radiation [dB(A)] | 36.2 | 41.7 | 46.2 | 49.7 | |
| Duct "From dwelling" [dB(A)] * | 37.5 | 45.5 | 50.5 | 55.5 | |
| Duct "To dwelling" [dB(A)] * | 53 | 61.5 | 66.5 | 70.5 |
* Duct sound level including end correction
In practice the value may differ by 1dB(A) through measurement tolerances.
A graph shows the relationship between flow rate and resistance for different fan settings, with capacity in Watts indicated in circles.
2.2 Dimensions
All indicated dimensions are in mm.
Diagrams illustrate the dimensions of the Ease 200 Enthalpy unit from the front, side, and top views, with key measurements provided.
2.3 Connections
The Ease 200 Enthalpy appliance is available in a left-hand and right-hand version.
Left-hand version: The “warm” connections supply air (1) and extract air (3) are on the left-hand side of the appliance.
Right-hand version: The “warm” connections supply air (1) and extract air (3) are on the right-hand side of the appliance.
Diagrams show the left-hand and right-hand versions of the appliance with numbered connections:
- 1: Supply air
- 2: Exhaust air
- 3: Extract air
- 4: Outdoor air
- 5: Electrical connections PCB
- 6: Exhaust air filter
- 7: Supply air filter
- 8: Mounting bracket
- 9: USB and Service Tool connection
- 10: Push button
- 11: Status LED
2.4 Overview internal parts
The appliance shown is a left-hand version; in a right-hand version all the internal parts are mirrored.
Diagrams illustrate the internal components of the appliance, with a corresponding list:
- 1: Extract air temperature sensor (NTC2)
- 2: Push button
- 3: PCB location
- 4: Status LED
- 5: Outdoor air temperature sensor (NTC1)
- 6: Supply air filter
- 7: Exhaust fan
- 8: Supply fan
- 9: Heat exchanger
- 10: Exhaust air filter
- 11: Bypass valve incl. motor
- 12: Service Tool connection
- 13: USB connection
- 14: RJ12 connector (X14/black)
- 15: ModBus connection (X15/red)
- 16: 24V connection (X16/black)
- 17: eBus connection (X17/green)
- 18: 24V connection (X18/black)
- 19: Relay output (X19/blue)
- 20: 230V power supply cable
3 Service parts
3.1 Exploded view service articles
A diagram shows an exploded view of the service articles for the appliance.
3.2 Service parts list
| No. | Article description | Article code |
|---|---|---|
| 1 | Filter caps (2 pcs) | 532977 |
| 2 | Front cover | 533046 |
| 3 | Filter ISO Coarse 60% (2 pcs)* | 532994 |
| 4 | Fan holder (1 pcs) | 533049 |
| 5 | Bypass valve with motor complete | 533048 |
| 6 | Button PCB | 532979 |
| 7 | Main PCB** | 532978 |
| 8 | Mounting bracket | 533044 |
| 9 | Cable set | 533043 |
| 10 | Mains plug and cable 230V *** | 532756 |
| 11 | Outdoor air temperature sensor NTC1 10K | 531775 |
| 12 | Extract air temperature sensor NTC2 10K | 531775 |
| 13 | Fan (1 pcs) (Without fan housing)**** | 533042 |
| 14 | Heat exchanger enthalpy | 532976 |
* It is also possible to order filters via www.brinkclimatesystems.nl
** When replacing the main PCB, always use the Service Tool to set the correct DIP-switch value and serial number. Without the correct DIP-switch value the unit will NOT function! See → Ordering service parts -> page 11 for information
*** The power cable is fitted with a circuit board connector. When replacing it, always order a replacement mains cable from Brink Climate Systems B.V..
To prevent dangerous situations, a damaged mains connection can only be replaced by a qualified expert.
**** Brink Climate Systems B.V. supplies fans from different suppliers under the same service article number. All ordered Ease 200 Enthalpy fans are compatible for the appliance.
3.3 Ordering service parts
Warning: Without the correct DIP-switch value set in the main PCB the appliance will NOT function!
When a replacement main PCB is ordered, the DIP-switch settings and serial number need to be programmed correctly into the PCB after installation.
Set the DIP-switch and serial number in the PCB with the Service Tool under the tab "Diagnostics".
The DIP-switch value can be found on the type plate (3 digits on the far right in the frame with the device name, the first 0 should not be entered).
The serial number can be found on the type plate as well.
The type plate is located on top of the appliance on the PCB cover.
A sample type plate is shown with fields for Type, Serial number, Year of construction, Maximum current consumption, Average power consumption, and Power supply. It also includes installation address information in multiple languages.
When ordering parts, in addition to the article code number (see exploded view), please state the heat recovery appliance type, the serial number, the year of production and the name of the part:
| Example | |
|---|---|
| Appliance type | Ease 200 Enthalpy |
| Serial number | 433100250101 |
| Year of production | 2024 |
| Part | Fan |
| Article code | 533042 |
| Quantity | 1 |
4 Declaration of Conformity
This declaration of conformity is issued under the sole responsibility of the manufacturer.
Manufacturer: Brink Climate Systems B.V.
Address: PO Box 11, NL-7950 AA, Staphorst, The Netherlands
Product: Ease 200 Enthalpy
The product described above complies with the following directives:
- 2014/35/EU (OJEU L 96/357; 29-03-2014)
- 2014/30/EU (OJEU L 96/79; 29-03-2014)
- 2009/125/EU (OJEU L 285/10; 31-10-2009)
- 2017/1369/EU (OJEU L 198/1; 28-07-2017)
- RoHS 2011/65/EU (OJEU L 174/88; 01-07-2011)
The product described above has been tested according to the following standards:
- EN IEC 55014-1: 2021
- EN IEC 55014-2: 2021
- EN IEC 61000-3-2: 2019 + A1:2021
- EN 61000-3-3: 2013 + A1:2019 + A2:2021
- EN 60335-1: 2012 + AC:2014 + A11:2014 + A13:2017 + A1:2019 + A2:2019 + A14:2019 + A15:2021
- EN 60335-2-40: 2003 + A11:2004 + A12:2005 + AC:2006 + A1:2006 + A2:2009 + AC:2010 + A13:2012
- EN 62233: 2008 + AC:2008
Staphorst, 18-11-2024
R.J.F. Maassen
Country Manager Heating and Ventilation etherlands
5 ERP values
Technical information sheet Ease 200 Enthalpy in accordance with Ecodesign (ErP), no. 1254/2014 (Annex IV)
| Manufacturer: | Brink Climate Systems B.V. | ||||
|---|---|---|---|---|---|
| Model: | Ease 200 Enthalpy | ||||
| Climate zone | Type of control | SEC Value in kWh/m²/a | SEC Class | Annual electricity consumption (AEC) in kWh | Annual heating saved (AHS) in kWh |
| Average | manual | -32,77 | B | 371 | 4136 |
| clock control | -33,94 | B | 339 | 4174 | |
| 1x sensor (RH/CO2/VOC) | -36,17 | A | 280 | 4251 | |
| 2 or more sensors (RH/CO2/VOC) | -40,15 | A | 183 | 4404 | |
| Cold | manual | -66,95 | A+ | 908 | 8091 |
| clock control | -68,49 | A+ | 876 | 8166 | |
| 1x sensor (RV/CO2/VOC) | -71,45 | A+ | 817 | 8315 | |
| 2 or more sensors (RH/CO2/VOC) | -76,88 | A+ | 720 | 8614 | |
| Hot | manual | -10,56 | E | 326 | 1870 |
| clock control | -11,53 | E | 294 | 1888 | |
| 1x sensor (RH/CO2/VOC) | -13,34 | E | 235 | 1922 | |
| 2 or more sensors (RH/CO2/VOC) | -16,47 | E | 138 | 1991 | |
Type of ventilation unit: Balanced residential ventilation appliance with heat recovery
Fan: EC - fan with infinitely variable control
Type of heat exchanger: Recuperative plastic cross-counterflow heat exchanger
Thermal efficiency: 76%
Maximum flow rate: 200 m³/h
Maximum rated power: 152 W
Sound power level Lwa: 43,7 dB(A)
Reference flow rate: 140 m³/h
Reference pressure: 50 Pa
Specific Power Input (SEL): 0,26 Wh/m³
Control factor: 1.0 in combination with multiple position switch, 0.95 in combination with clock control, 0.85 in combination with 1 sensor, 0.65 in combination with 2 or more sensors
Leakage*: Internal: 1,40%, External: 0,90%
Position dirty filter indication: Permanently lit red LED on the appliance / on the multiple position switch (LED) / on the Brink Air Control or
Attention! For optimal energy efficiency and a proper operation, a regular filter inspection, cleaning or replacement is necessary.
Internet address for Assembly instructions: https://www.brinkclimatesystems.nl/support/downloads
Bypass: Yes, 100% Bypass
* Measurements executed by TZWL according to the EN 13141-7 standard
6 Recycling and disposal
Do not dispose of as household waste! ?
In accordance with the Waste Disposal Act, the following components must be disposed of or recycled in an environmentally compatible manner by means of appropriate collection points:
- Old appliance
- Wearing parts
- Defective components
- Electrical or electronic waste
- Environmentally hazardous liquids and oils
Environmentally compatible means separated by material groups to ensure the greatest possible recyclability of the basic materials with the minimum environmental impact.
- Dispose of packaging made of cardboard, recyclable plastics and synthetic filler materials in an environmentally compatible manner through appropriate recycling systems or a recycling center.
- Please observe the applicable national and local regulations.
Related Documents
 |
Brink Ease 200 Technical Data Sheet Comprehensive technical data sheet for the Brink Ease 200 ventilation unit, detailing specifications, dimensions, connections, service parts, and compliance information. |
 |
Brink Flair 225 Enthalpy Technical Data Sheet Technical data sheet for the Brink Flair 225 Enthalpy ventilation unit, including specifications, dimensions, appliance parts, service information, conformity declarations, ERP values, and recycling guidelines. |
 |
Brink Flair 450/600 Technical Data Sheet | Heat Recovery Ventilation Comprehensive technical data sheet for Brink Flair 450 and Flair 600 heat recovery ventilation appliances, detailing specifications, dimensions, service information, ERP values, and conformity declarations. |
 |
Brink Flair 325 Technical Data Sheet and Specifications Comprehensive technical data sheet for the Brink Flair 325 heat recovery ventilation appliance, covering specifications, connections, exploded views, service information, conformity, and ERP values. |
 |
Installatievoorschriften Brink Renovent Excellent 300/400 (Plus) Gedetailleerde installatiehandleiding voor de Brink Renovent Excellent 300/400 (Plus) ventilatie-unit met warmteterugwinning. Ontdek specificaties, installatieprocedures en onderhoud voor een gezond binnenklimaat. |
 |
Brink Air Control Ventilation & Allure Installation Regulations and User Manual Comprehensive installation regulations, user manual, and technical specifications for Brink Air Control Ventilation and Brink Air Control Allure clock thermostat systems by Brink Climate Systems B.V. |
 |
Renovent Sky 150 Plus Installation Instructions Comprehensive installation guide for the Brink Renovent Sky 150 Plus ventilation unit, detailing features, operation, and technical specifications for optimal setup and performance. |
 |
Brink Renovent Sky 300 Plus Installation Instructions Detailed installation guide for the Brink Renovent Sky 300 Plus heat recovery ventilation unit. Covers features, technical specifications, electrical connections, and setup for optimal indoor air quality and energy efficiency. |