Instruction Manual of Anemometer
This manual provides detailed instructions for operating and understanding the features of the anemometer.
Introduction
Before use, unscrew the screws of the battery compartment and connect the battery.
1. Functional Features
- Anti-interference touch button
- Wind speed measurement
- Air volume measurement
- Temperature measurement
- Compact structure, waterproof and dustproof
- Current wind speed, maximum wind speed, minimum wind speed, average wind speed measurement
- Low power display function
- Backlight display function
- Lithium battery charging, Type-C interface
- Option to enable automatic shutdown
2. Operating Instructions
Power On/Off: Press and hold the power button (①) for 3 seconds to start the machine. Briefly press to shut it down. In the off state, long press the power button (①) for 5 seconds to enable/disable the automatic shutdown feature. The "ON" symbol will appear on the LCD when enabled.
Function Switching: Short press the function switch button (②) to switch between wind speed and air volume functions.
Unit Switching: When measuring wind speed, press the unit switch button (③) to cycle through units: m/s, km/h, ft/min, knots, mph. In air volume mode, press the unit switch button (③) to cycle through CFM, CMS, CMM. In air volume mode, long press the unit switch button (③) to switch between square meters and square feet for the secondary display.
Area and Temperature Unit Setting: In wind speed mode, press the temperature unit switch button (④) to switch between Celsius and Fahrenheit. In air volume mode, press the area button (④) and the area symbol will flash. Use the function switch button (②) to select data bits (hundreds, tens, units, decimal places) and the max/min/real-time value switch button (⑥) to adjust the number. Press the area button (④) again to confirm the area.
Data Hold and Backlight: Short press the data hold button (⑤) to hold the current wind speed or air volume data. Long press the data hold button (⑤) to toggle the backlight.
Wind Speed Value Switching: Press the max/min/real-time value switch button (⑥) to switch the wind speed display between maximum, minimum, and real-time values.
3. Specifications
| Parameter | Unit | Range | Resolution | Accuracy |
|---|---|---|---|---|
| Wind Speed | ||||
| m/s | 0.3~30 | 0.1 | ±5% | |
| Ft/min | 59~5905 | 19 | ||
| Knots | 1~55 | 0.2 | ||
| Km/h | 2~90 | 0.3 | ||
| Mph | 1~65 | 0.2 | ||
| Temperature | ||||
| °C | -10°C~45°C | 0.2 | ±2°C | |
| °F | 14°F~113°F | 0.36 | ±3.6°F | |
| Air Volume Index | ||||
| CMM (M³/MIN) | 0-999900 | 0.001-100 | Area: 0-999900 | |
| CMS (M³/S) | 0-999900 | 0.001-100 | ||
| CFM (FT³/MIN) | 0-999900 | 0.001-100 | ||
| Battery | Lithium battery model: 602040 (400mAh). Charging time approx. 40 minutes. Continuous use approx. 30 hours. | |||
| Operating temperature | -10°C~45°C (14°F~113°F) | |||
| Relative humidity | ≤90%RH | |||
| Store temperature | -20°C~50°C (-4°F~122°F) | |||
| Current consumption | Approx. 3mA | |||
| Weight | 147g (including battery) | |||
Note: The product images and content are for reference only. In case of any discrepancy or update, please refer to the actual product without further notice.
Contact Us
For any problems or concerns, please email AFTERSALES1010@HOTMAIL.COM for a prompt response.
To ensure a quick resolution, please include the following information in your email:
- Order Number
- Platform of Purchase
- Full Model Number
- Description of the Problem (attaching videos or photos is recommended for faster troubleshooting)
