RF Exposure Evaluation Report
Shenzhen Huaxia Testing Technology Co., Ltd.
1F., Block A of Tongsheng Technology Building, Huahui Road, Dalang Street, Longhua District, Shenzhen, China
Telephone: +86-755-26648640 | Fax: +86-755-26648637 | Website: www.cqa-cert.com
Report Template Version: V05 | Report Template Revision Date: 2021-11-03
Report Details
Report No.: | CQASZ20220400621E-02 |
---|---|
Applicant: | GANZHOU DEHUIDA TECHNOLOGY CO., LTD |
Address of Applicant: | Dehuida Science and Technology Park, Huoyanshan Road, Anyuan District, Ganzhou City, Jiangxi Province. P.R China. |
Equipment Under Test (EUT): | ONN. SMALL RUGGED SPEAKER |
Model No.: | AAGRY100081918, AAORRA100081918, AALUN100081918, AALAV100081918, AABLSV100081918 |
Test Model No.: | AAGRY100081918 |
Brand Name: | ONN. |
FCC ID: | 2AO5X-BM1023 |
Standards: | 47 CFR Part 1.1307, 47 CFR Part 2.1093, KDB447498D01 General RF Exposure Guidance v06 |
Date of Receipt: | 2022-04-13 |
Date of Test: | 2022-04-13 to 2022-04-20 |
Date of Issue: | 2022-04-26 |
Test Result: | PASS* (*In the configuration tested, the EUT complied with the standards specified above.) |
Version History
Report No. | Version | Description | Issue Date |
---|---|---|---|
CQASZ20220400621E-02 | Rev.01 | Initial report | 2022-04-26 |
General Information
Client Information
Applicant: | GANZHOU DEHUIDA TECHNOLOGY CO., LTD |
---|---|
Address of Applicant: | Dehuida Science and Technology Park, Huoyanshan Road, Anyuan District, Ganzhou City, Jiangxi Province. P.R China. |
Manufacturer: | GANZHOU DEHUIDA TECHNOLOGY CO., LTD |
Address of Manufacturer: | Dehuida Science and Technology Park, Huoyanshan Road, Anyuan District, Ganzhou City, Jiangxi Province. P.R China. |
Factory 1: | GANZHOU DEHUIDA TECHNOLOGY CO., LTD |
Address of Factory 1: | Dehuida Science and Technology Park, Huoyanshan Road, Anyuan District, Ganzhou City, Jiangxi Province. P.R China. |
Factory 2: | DEHUIDA VIET NAM TECHNOLOGY COMPANY LIMITED |
Address of Factory 2: | Factory No.1, Lot 13 Noi Hoang industrial cluster (Rent factory of Viet Australia Steel Joint Stock Company), Noi Hoang Commune, Yen Dung District, Bac Giang Province, Vietnam |
General Description of EUT
Product Name: | ONN. SMALL RUGGED SPEAKER |
---|---|
Model No.: | AAGRY100081918, AAORRA100081918, AALUN100081918, AALAV100081918, AABLSV100081918 |
Test Model No.: | AAGRY100081918 |
Trade Mark: | ONN. |
Software Version: | V1.3 |
Hardware Version: | V2.0 |
Power Supply: | Li-ion battery: DC 3.7V 1200mAh, Charge by DC 5V for adapter |
General Description of BT
Operation Frequency: | 2402MHz~2480MHz |
---|---|
Modulation Type: | GFSK, π/4DQPSK, 8DPSK |
Transfer Rate: | 1Mbps/2Mbps/3Mbps |
Number of Channel: | 79 |
Product Type: | Mobile [✓], Portable [✓], Fix Location [ ] |
Antenna Type: | PCB antenna |
Antenna Gain: | 0dBi |
Note: Model No.: AAGRY100081918, AAORRA100081918, AALUN100081918, AALAV100081918, AABLSV100081918. The circuit design, layout, components used and internal wiring are all the same, except for the color difference.
SAR Evaluation
RF Exposure Compliance Requirement
Standard Requirement
According to KDB447498D01 General RF Exposure Guidance v06 4.3.1. Standalone SAR test exclusion considerations. Unless specifically required by the published RF exposure KDB procedures, standalone 1-g head or body and 10-g extremity SAR evaluation for general population exposure conditions, by measurement or numerical simulation, is not required when the corresponding SAR Exclusion Threshold condition, listed below, is satisfied.
Limits
The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] · [√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where f(GHz) is the RF channel transmit frequency in GHz. Power and distance are rounded to the nearest mW and mm before calculation. The result is rounded to one decimal place for comparison. The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion.
EUT RF Exposure
For BT
Measurement Data
GFSK mode
Test channel | Peak Output Power (dBm) | Tune up tolerance (dBm) | Maximum tune-up Power (dBm) | (mW) |
---|---|---|---|---|
Lowest(2402MHz) | 5.06 | 5.0±1 | 6.0 | 3.981 |
Middle(2441MHz) | 5.54 | 5.5±1 | 6.5 | 4.467 |
Highest(2480MHz) | 6.08 | 6.0±1 | 7.0 | 5.012 |
π/4DQPSK mode
Test channel | Peak Output Power (dBm) | Tune up tolerance (dBm) | Maximum tune-up Power (dBm) | (mW) |
---|---|---|---|---|
Lowest(2402MHz) | 5.28 | 5.0±1 | 6.0 | 3.981 |
Middle(2441MHz) | 5.7 | 5.5±1 | 6.5 | 4.467 |
Highest(2480MHz) | 6.17 | 6.0±1 | 7.0 | 5.012 |
8DPSK mode
Test channel | Peak Output Power (dBm) | Tune up tolerance (dBm) | Maximum tune-up Power (dBm) | (mW) |
---|---|---|---|---|
Lowest(2402MHz) | 5.98 | 6.0±1 | 7.0 | 5.012 |
Middle(2441MHz) | 6.44 | 6.5±1 | 7.5 | 5.623 |
Highest(2480MHz) | 6.57 | 6.5±1 | 7.5 | 5.623 |
Worst case: 8DPSK mode
Channel | Maximum Peak Conducted Output Power (dBm) | Tune up tolerance (dBm) | Maximum tune-up Power (dBm) | (mW) | Calculated value | Exclusion threshold |
---|---|---|---|---|---|---|
Lowest (2402MHz) | 5.98 | 6.0±1 | 7.0 | 5.012 | 1.554 | 3.0 |
Middle (2441MHz) | 6.44 | 6.5±1 | 7.5 | 5.623 | 1.757 | |
Highest (2480MHz) | 6.57 | 6.5±1 | 7.5 | 5.623 | 1.771 |
Conclusion: The calculated value ≤3.0, SAR is exempted.
Remark: The Max Conducted Peak Output Power data refer to report Report No.: CQASZ20220400621E-01
Signatures
Tested By: Lewis Zhou (Lewis Zhou)
Reviewed By: Rock Huang (Rock Huang)
Approved By: Jack Ai (Jack Ai)
[Approved Stamp]
The test report is effective only with both signature and specialized stamp. The result(s) shown in this report refer only to the sample(s) tested. Without written approval of CQA, this report can't be reproduced except in full.