Gerber TREYSTA Tub and Shower Faucet Rough-In Valve Assembly
Model Numbers: GS-504 (G00GS504), GS-505 (G00GS505), GS-507 (G00GS507)
SPECIFICATIONS
Features/Benefits
- Includes forged valve body, plaster guard, and innovative pressure test cap.
- Connection Type:
- GS-504: 1/2" F1807 (crimp) PEX inlets, 1/2" IPS/sweat outlets
- GS-505: 1/2" IPS/sweat inlets, 1/2" IPS/sweat outlets
- GS-507: 1/2” F1960 (cold expansion) PEX inlets, 1/2" IPS/sweat outlets
- Installed rough-in can be pressure tested to 150PSI (air or water), mixed or isolated inlets, using included pressure test plug.
- Accommodates standard, back-to-back, and thin wall installations.
- Integrated, easy-access mounting system.
- Treysta cartridge ships with trim, sold separately.
Catalog Numbers
| Model Number (Catalog Number) | Inlet Type |
|---|---|
| GS-504 (G00GS504) | F1807 inlets w/o stops |
| GS-505 (G00GS505) | IPS/sweat inlets w/o stops |
| GS-507 (G00GS507) | F1960 inlets w/o stops |
Standards & Certifications
UPC Certified [UPC logo description]
Diagram Descriptions
Rough-In Valve Body Illustrations
Three illustrations of rough-in valve bodies are shown:
- GS-504: Features two 1/2" F1807 (crimp) PEX inlets and two 1/2" IPS/sweat outlets.
- GS-505: Features two 1/2" IPS/sweat inlets and two 1/2" IPS/sweat outlets.
- GS-507: Features two 1/2” F1960 (cold expansion) PEX inlets and two 1/2" IPS/sweat outlets.
Front View Dimensions
The front view of the rough-in valve assembly shows the main valve body with four ports. Overall height is 3 15/16 inches (100mm) and overall width is 3 1/4 inches (82mm). A reference line indicates the plane for the "FINISHED WALL FLUSH WITH THIS SURFACE". An upward directional arrow [up arrow emoji] is present.
Side View Dimensions and Connections
The side view illustrates the valve body's depth and connection points. The overall width is 3 3/16 inches (81.6mm). The main outlet connection is a 1/2"-14NPT thread. Two smaller connections are shown with a diameter of 5/8 inch (16mm). The depth into the wall is specified with a minimum of "Min finished wall" and a maximum of "Max finished wall", with a total wall thickness range of 3 1/8 inches. Another dimension indicates a depth of 3 5/8 inches (92mm) from the front of the valve to the end of the outlet connection. Additional dimensions of 9/16 inch (15mm) and 3/4 inch (18.5mm) are shown near the outlet.
Submittal Information
Name: _________________________
Location: _________________________
Contractor: _________________________
Contact #: _________________________
