120 Watt Power Supply User Guide

Goal Zero

Important Safety Instructions

Use only with Yeti X Lithium Portable Power Stations 200X, 500X, 1000X, 1500X, 3000X, 6000X.
Working temperature: -20°C to 40°C.
Approved by CE, FCC, UL, RoHS certifications.
Built-in Short Circuit, Over Voltage, and Over Current Protection.
DO NOT disassemble or attempt to repair the module.
Please unplug when not in use.
Avoid exposure to rain or moisture to reduce risk of product damage or electric shock.
Keep this product out of the reach of children.
Use original AC cable.
Use within space large enough to facilitate heat dissipation to extend the life of the power supply.

Get to Know Your Gear

This section describes the 120W Power Supply unit. It features a black rectangular power brick with an attached AC power cord (wall plug) and an output cable with a blue ring connector. An indicator light is present on the power brick.

Input: AC Wall Plug, 100-240V ~ 50/60Hz 3.0A.

Output: 8.0mm connector, 16V, 7.5A, 120W.

Cable Length: Approximately 9' 4" (or 2.8 meters).

How it Works

Charging Your Yeti Power Station

Charge your Yeti 200X/500X even faster with the Yeti X 120W Power Supply.

CAUTION: This 120W power supply is designed exclusively for the Yeti X line to improve charge time and cannot be used for Yeti Lithium or Yeti Lead Acid power stations.

Steps to Connect and Charge

Connect the AC wall plug into the power brick.
Plug the AC connection into a standard wall outlet.
Connect the blue ring 8.0mm connector into the 8.0mm input on your Yeti X Power Station.
The input indicator light on your Yeti will illuminate when charging.

Technical Specifications

General	Details
Dimensions	2.5 x 5.9 x 1.4 in (6.5 x 15 x 3.5 cm)
Gauge	14AWG
Used with	Goal Zero Yeti 200X, 500X, 1000X, 1500X, 3000X, 6000X
Certifications	CE, FCC, UL, RoHS
Ports: Input	AC Wall Plug 100-240V ~ 50/60Hz 3.0A
Ports: Output	8.0mm 16V - 7.5A, 120W

Frequently Asked Questions

Why is my power supply hot?

The heat is normal and can reach temperatures up to 140°F (60°C). This is caused by the voltage change from AC to DC.

Why is my power station not charging?

Please double-check that all connections are firmly plugged in. Yeti Power Stations have built-in overcharge protection. It is possible your unit is fully charged or close to a full charge. It is recommended to confirm functionality at a lower battery level (below 80%).

Contact Information

GOAL ZERO HEADQUARTERS
675 West 14600 South
Bluffdale, UT 84065
1-888-794-6250
Designed in the U.S.A.
Made in China

Goal Zero Yeti is a trademark of Goal Zero.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

GOALZERO.COM

	Goal Zero Yeti Vehicle Installation Guide: Safety and Grounding Instructions Comprehensive guide for installing the Goal Zero Yeti portable power station in a vehicle, covering essential safety precautions, grounding procedures, and GFCI installation. Learn how to safely connect your Yeti for mobile power.
	Goal Zero Yeti X 600W Power Supply User Guide Comprehensive user guide for the Goal Zero Yeti X 600W Power Supply, detailing safety instructions, setup, operation, technical specifications, and troubleshooting for Yeti X portable power stations.
	Goal Zero Yeti 300/500/700 Portable Power Station User Guide Comprehensive user guide for the Goal Zero Yeti 300, 500, and 700 portable power stations, covering setup, charging, usage, maintenance, technical specifications, and troubleshooting.
	Goal Zero Yeti 12V Car Charging Cable User Guide User guide for the Goal Zero Yeti 12V Car Charging Cable, detailing its features, how to use it, technical specifications, and safety instructions for charging Goal Zero Sherpa and Yeti power stations from a vehicle's 12V outlet.
	Goal Zero Yeti Power Station Return Instructions Step-by-step guide for returning a Goal Zero Yeti Power Station, emphasizing proper packaging and documentation for hazardous material shipping.
	Goal Zero Yeti App Quick Start Guide A quick start guide for the Goal Zero Yeti App, version 3.0, detailing how to pair your Yeti Portable Power Station via Wi-Fi or Bluetooth, manage settings, and monitor your device.
	Goal Zero Yeti 1000 Core User Guide: Portable Power Station Comprehensive user guide for the Goal Zero Yeti 1000 Core portable power station. Learn about its features, charging methods (AC, solar, vehicle), usage, maintenance, troubleshooting, and warranty information for reliable off-grid power.
	Goal Zero Yeti 1500X User Guide: Portable Power Station Comprehensive user guide for the Goal Zero Yeti 1500X portable power station. Learn how to charge, use, and maintain your power station for reliable off-grid power.