XIEGU DE-19 External USB Adapter: Connection Diagrams and Software Setup
Technical Data Sheet | Revision 1.0 | Date: 2022. 08. 10
Applicable Models: G90, G90S, G106, G106C, X5105
Connection Diagrams
1. Connection Diagram for UG106C (G106) and XPA125B
This diagram illustrates the connection of the DE-19 external USB adapter to a PC and the UG106C (G106) radio along with the XPA125B amplifier.
PC Connection: A personal computer connects to the DE-19 adapter via a USB Type-C cable.
DE-19 Adapter: The DE-19 adapter features ports labeled 'ANT', 'DC IN', 'KEY', 'COMM', and 'ACC'.
Connections:
- A 'CIV connecting line' links the DE-19 adapter to the radio.
- An 'L4001 connecting line' is shown.
- An 'ACC connecting line' connects the DE-19 adapter to the radio.
UG106C (G106) and XPA125B: The XPA125B amplifier has ports for ANT, FUSE, DC IN, TRX, FUSE, ACC, and COMM. The G106C radio is also depicted.
Diagram Description: The diagram visually shows the physical layout of these components and the routing of the connecting cables.
2. Connection Diagram for G90/G90S
This diagram shows how to connect the DE-19 external USB adapter to a PC and the G90/G90S radio.
PC Connection: A personal computer connects to the DE-19 adapter via a USB Type-C cable.
DE-19 Adapter: The DE-19 adapter has ports for ANT, DC IN, KEY, COMM, and ACC.
Connections:
- A 'CIV connecting line' links the DE-19 adapter to the radio.
- An 'ACC connecting line' connects the DE-19 adapter to the radio.
G90/G90S Radio: The diagram distinguishes between the 'G90/G90S tail' and the 'G90/G90S head' of the radio unit.
Diagram Description: The diagram illustrates the physical arrangement and cable connections for the DE-19 adapter with the G90/G90S radio.
3. Connection Diagram for X5105
This diagram illustrates the connection of the DE-19 external USB adapter to a PC and the X5105 radio.
PC Connection: A personal computer connects to the DE-19 adapter via a USB Type-C cable.
DE-19 Adapter: The DE-19 adapter features ports for ANT, DC IN, KEY, COMM, and ACC.
Connections:
- A 'CIV connecting line' links the DE-19 adapter to the radio.
- An 'ACC connecting line' connects the DE-19 adapter to the radio.
X5105 Radio: The X5105 radio has ports labeled ACC, CIV, KEY, PA, ATU, COM, and MIC.
Diagram Description: The diagram visually depicts the physical setup and cable routing for connecting the DE-19 adapter to the X5105 radio.
Setting of Assorted PC Control Software
This section provides guidance on configuring PC control software for use with the DE-19 adapter and compatible radios.
4.1 JTDX Software Configuration
When connecting radios like G106, X5105, and G90, the new version of JTDX software can be installed directly.
For older versions of JTDX, select 'IC-7000' as the radio model and '19200' as the serial console baud rate.
4.2 OmniRig Software Configuration (for old-version JTDX)
The old-version JTDX relies on OmniRig software for proper connection. The following settings are recommended for OmniRig:
- Rig type: IC - 7000
- Baud rate: 19200
- Port: Select the virtualized port number on your computer.
- RTS: LOW
- DTR: LOW
- Other options should be left at their default settings.
4.3 HRID Software and Other Control Software
The port and baud rate settings for HRID software should be configured as described above.
Other control software of a similar type can be configured using the same settings.
