Product Introduction
The Xiegu DE-19 is an external expansion adapter designed to enhance communication capabilities for compatible Xiegu radio models. It integrates essential units including a USB interface, isolation, and amplification, facilitating seamless data transfer and PC control.
Compatible Radios
- Xiegu G90 HF Radio
- Xiegu G106 QRP Radio
- Xiegu X5105 HF Transceiver
Key Features and Interfaces
Indicators
- Data Reception and Transmission Indicator
- USB Connection Indicator
- Reception and Transmission Indicator
- Radio Connection Status Indicator
Interfaces
- USB Interface for PC
- Interface for CIV
- Interface for XPA125B
- Interface for ACC (Mini-Din8)
PC Control Software Setup
The DE-19 facilitates PC control using various software applications. For new-version JTDX software, direct installation is supported on G90 and X5105 models. Older JTDX versions may require OminiRig software. Specific settings for OminiRig include Rig type: IC - 7000, Baud rate: 19200, and appropriate virtual COM port selection. RTS and DTR should be set to LOW. Similar settings apply to HRID software.
Connecting Guides
Detailed diagrams are provided for connecting the DE-19 adapter to specific Xiegu radio models:
Xiegu G106 & XPA125B
Illustrates the connection between a PC, the DE-19 adapter, and the G106C/XPA125B radio, specifying CIV and ACC connecting lines.
Xiegu G90
Shows the connection setup for the G90/G90S radio, linking the PC, DE-19 adapter, and the radio's tail and head units via CIV and ACC lines.
Xiegu X5105
Details the connection diagram for the X5105 transceiver, outlining the path from the PC through the DE-19 adapter to the X5105 unit using CIV and ACC connections.
