ResMed AirFit F40 Full Face Mask
The ResMed AirFit F40* is an ultra-compact, full face mask that combines high seal performance with comfort in a flexible, easy-to-fit design.
Systems and Components
The AirFit F40 mask system consists of the following components:
- Quick release elbow
- Mask frame
- Cushion
- Headgear
The full mask assembly is shown, comprising these parts connected together.
How to Fit the AirFit F40
Unclip lower straps away from frame and place cushion under nose to fit against the face. With the ResMed logo facing up, pull headgear over head.
Bring the lower straps under the ears and reattach to the frame with the magnetic clips. Feed longer hair through the back of the frame, if needed.
Adjust the upper straps and then the lower straps for a snug fit.
Ordering Information
| Product | Part number | HCPC | Recommended replacement schedule |
|---|---|---|---|
Complete mask system (includes frame, cushion and headgear)
| 64603 64600/64601/64602 64604 | A7030 + A7035 | - |
Frame system (includes standard frame and cushion)
| 64607 64608 64609 | A7030 | Every 3 months |
Cushion
| 64627 64628 64629 | A7031 | Monthly |
Headgear
| 64633 64634 64635 | A7035 | Every 6 months |
† Replacement cycle may vary depending on patient's insurance coverage.
*The mask contains magnets that may interfere with certain implants or medical devices. Please refer to the User Guide for complete information, including magnet contraindications and warnings.
