Instruction Manual for Fevos models including: FL01 Flya Way Lamp, FL01, Flya Way Lamp, Way Lamp, Lamp
FEVOS LIMITED FL01 2BGDU-FL01 2BGDUFL01 fl01
DreamWave
Lifht Design,Future Evolution
1 2
3 4
5
6 7
8 5
9
Plan View
Front View
Side View
English
1DreamWave
1 USB C
1
1. 2.360° 3. 4.
5. 6. 7. 8.LED
9.USB C
1 2 360°LED 3 LED 4 LED9 5 TWSLED 6 IPX4
7 USB Type-C
USB C 3
LED
USB C
LED LED LED LED LED
USB C 1. USB C 2. USB USB
9
+RGB
,
3
2 ( /
TWS
· LED · TWS, · TWS,LED TWS
LED (
LED
Box contents
One DreamWave
Product Overview 1. Touch area (lighting function) 2.360° rotating light 3.White noise button 4. Switch button
1 USB Type C charging cable
5. Volume button 6 .Timing button 7. Setting button 8.LED indicator (Bluetooth and charging)
1 This user manual 9.USB Type C charging port
Feature 1 Built-in eight kinds of white noise 2 360° rotating LED light design 3 Memory system dimmable LED light 4LED indicator is available in 9 colors (warm white, cold white, blue, yellow, green, red, purple, light pink and light blue) 5 Two machines can be TWS paired to synchronize LED lights and white noise 6 for outdoor use (IPX4) 7 USB Type-C charging
Charging We recommend that you fully charge the battery before using it for the first time The first full charge via USB C takes about 3 hours.
LED indicator information (Charging)
Charge using a USB C cable charge
in use low battery Fully charged
LED Light Status (Red) The LED indicator continues to light up
LED indicator light off The LED indicator blinks red The LED indicator is green
Charging with a USB C cable 1. Connect the attached USB C-type cable to the charging port. 2. Plug the USB port of the cable into any USB charger.
operating instructions Set up a sleep light speaker
The function of the light is controlled by the top touch button
turn the light on
Click the top touch button
Switch light colors Switch lighting mode
Click the top touch button to switch between the 9 colors Double click the top touch button to switch between cold white + warm white and RGB lighting modes
Switch breathing light mode Three touch the top button to switch the breathing light mode
adjust brightness
Long press the top touch button to reach the desired brightness and release it
douse the glim
Wait 3 seconds and click the top touch button
The next time you use it, the light will use the light color and light effect set last time.
Startup & Shutdown volume adjustment White noise play Turn off white noise timing mode setting command
Tap and hold key
Short press key Turn up the volume
Short press key volume down
Short press
key Play corresponding white noise (Each key can control 2 pieces)
Tap and hold
key Turn off corresponding white noise
Short press key Turn on and off the corresponding timing period (minutes)
Short press key Switch Bluetooth/Music mode
Two sleep light speakers synchronized (TWS Interconnect) ·Short press key Switch to Bluetooth mode and the LED indicator flashes blue ·Double click Enable Bluetooth TWS pairing. After the pairing is successful, the host is steady blue and the secondary blinks blue. ·Double click Cancel the Bluetooth TWS pairing, the LED indicator flashes blue after the cancellation is successful When the two TWS are interconnected, light effects, white noise playback, and timing can be synchronized
LED indicator information (Bluetooth)
operator schema Bluetooth mode Bluetooth connection successful
LED Light Status (blue) Fast blinking indicator light The main indicator is steady on, and the secondary indicator is blinking
1. IPX4 2. 3. 4 . 5. 5V
Plastic 190 g / 0.42 lbs 121.5*89.8*79.6mm 50 lm 3000K 5800K 3.7V 0°C - 45°C
*
Bluetooth®8m 2402M-2480MHZ USB C 1200 mAh USB C USB C 3 8h* 75% 1
FCC FCC15 :(1)(2)
:FCC15B () :
1. 2. 3. 4./
safety precautions
1. IPX4 waterproof, rain proof, splash proof and spray proof. 2. Do not put the device into water to avoid internal short circuit, overheating, fire, deformation, or even internal battery explosion. 3, do not store the equipment in extremely hot or cold areas. Recommended for use at room temperature. 4. Do not attempt to repair, repair or disassemble the device by yourself. 5. Ensure that you comply with the technical specifications for charging and do not use a power adapter whose output voltage exceeds the specified value to avoid any irreversible damage to the internal circuit (DC input voltage: 5V).
product standard Material: Plastic (Plastic) Weight :190 g/0.42 lbs Size: 121.5*89.8*79.6mm Max lumen output:50 Im Temperature: Warm white: 3000K Cold White: 5800K Battery voltage: 3.7V Operating temperature: 0-45
Bluetooth®(Bluetooth) connection range: 8m Frequency range: 2402M-2480MHZ Input interface: USB C Battery type: Lithium polymer Battery capacity: 1200 mAh Charging system: USB Type C interface Charging time (USBC type) : about 3 hours Normal battery life: up to 8h* (brightness 75%) International Protection: 1 year
* Varies according to use, set light intensity, and selected light color
FCC warning
This device complies with Part 15 of the FCC Rules.
Operation meets the following two conditions :(1) This equipment does not produce harmful interference, and (2) this equipment must accept any interference received, including interference that may cause unintended operation.
Any change or modification without the express approval of the responsible party for compliance may give the user no right to operate the equipment.
Note: This device has been tested to comply with the restrictions on Class B digital devices in Part 15 of the FCC Rules.These restrictions are intended to provide reasonable protection against harmful disturbances in residential installations.The device produces uses and can radiate RF energy, which, if not installed and used according to instructions, may cause harmful interference with radio communications.However, there is no guarantee that interference will not occur in a particular installation.If this device does cause harmful interference with radio or television reception (which can be determined by turning off and lifting the device), users are advised to try to correct the interference by one or more of the following measures:
1. Readjust or place the receiving antenna. 2 Increase the distance between device and receiver. 3. Connect the device to a circuit socket different from the circuit connected to the receiver. 4. Consult a dealer or experienced radio/TV technician for help
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction
Adobe PDF library 16.03 Adobe Illustrator(R) 24.0