EZCOO
User Manual
1x1 HDMI 2.0 Repeater
4K@60 4:4:4 8bit HDR, Scaler Output
SPDIF Optical Audio Output
EZ-EX11HAS-PRO
Make Installation Easy
OVERVIEW
The EZ-EX11HAS-PRO is a 1x1 HDMI repeater with Ultra HD 4K support. It supports HDMI 2.0 specification features including data rates up to 4K@60Hz 4:4:4 8bit, HDR and HDCP2.2, Deep Color, 3D, Lip Sync, and HD lossless Audio/Video formats. It supports scaler output, 4K to 1080P, and Audio DE-embed, Optical Audio out without TV connected. It is also an EDID manager, HDCP master, and signal amplifier.
FEATURES
- Supports scaler output, 4K to 1080P.
- Support HDMI 2.0 4K@60Hz 4:4:4 8bit and HDCP 2.2.
- Support HDR10 and Dolby Vision.
- Support Audio DE-embed, Optical Audio out without TV connected.
- Support EDID manager and copy, learning EDID from HDMI OUT.
- Support 3D, Support deep color 30bit, 36bit.
- Support Blue-Ray 24/50/60fs/HD-DVDIxvYCC.
- Dolby Digital Audio format, HDMI ports support Dolby Digital 7.1CH Audio; SPDIF Optical Audio supports Dolby Digital/ DTS-HD Master Audio/Dolby-AC3/DSD/LPCM/PCM 2.1/ 5.1CH Audio. Dolby Atmos.
- Support HDMI signal re-timing, enhanced signal never lose quality.
- Plug and Play; No driver required; Installs in minutes.
PRODUCT DIAGRAM
The product features the following ports and indicators:
- Front Panel: HDMI IN, HDR, DE-EMBED, EDID, HDCP 2.2
- Rear Panel: POWER/FW, SETTING, HDMI OUT, STEREO AUDIO OUT, OPTICAL AUDIO OUT, UPDATE
Dimensions: 58mm (Width) x 52.8mm (Height) x 22mm (Depth)
Package Accessories:
- HDMI repeater x1
- Reusable Cable Tie x2
- User Manual x1
- USB cable x1
INSTALLATION
Connect your devices as follows:
- Connect one cable from HDMI source devices (e.g., TV Box, PS5, Laptop) to the HDMI Splitter input.
- Connect one cable from each display (monitor or projector) to the HDMI Splitter outputs.
- Power on the HDMI Splitter using the Micro USB cable. It can be connected to any active device with a USB port, such as a Blu-Ray player or a phone charging adapter.
Firmware Update: Connect to a computer via Micro USB cable for firmware updates.
INSTRUCTION
Default Setting: Switches 1-5 are set to OFF.
Position 1 (HDCP compatible):
- Normal Mode: Switch 1 ON
- Test Mode: Switch 1 ON
Position 2 (Scaler Setting):
- Pass Through: Switch 2 ON
- 4K to 1080P: Switch 2 ON
Position 3-4-5 (EDID Setting):
- Copy EDID: Switches 3, 4, 5 ON
- 1080P_3D, 2CH HDR: Switches 3, 4 ON
- 4K60Hz(Y420), 2CH HDR: Switches 3, 5 ON
- 4K60Hz(Y420), 6CH HDR: Switches 4, 5 ON
- 4K60Hz(Y420), 8CH HDR: Switches 3, 4, 5 ON
- 4K60Hz(444), 2CH HDR: Switches 3, 4 ON
- 4K(Dolby Vision_Dolby Atmos): Switches 3, 5 ON
- 4K60Hz(444), 8CH HDR: Switches 4, 5 ON
Power:
The splitter is powered by Micro USB (cable included, adapter not included). It can be powered from a USB port on a Blu-Ray player or a phone charging adapter. Power range: 5V/1A to 5V/3A.
FW (Firmware):
For firmware updates and advanced settings, please visit SP12H2 on the EZCOO website: https://www.easycoolav.com
SPECIFICATIONS
| Feature | Specification | Feature | Specification |
|---|---|---|---|
| HDMI version | HDMI 2.0 | HDCP version | HDCP 2.2 |
| HDMI resolution | 4K*2K/1080p/1080i/720p/576p/576i/480p/480i | Video format | 24bit/30bit/36bit |
| Audio format | Dolby true HD/DTS-HD/LPCM7.1/Dolby AC3/DSD | Max working current | 200mA |
| Input/Output TMDS signal | 0.5~1.5Volts p-p(TTL) | Operating Humidity range | 5 to 90%RH (No Condensation) |
| Input/Output DDC signal | 5Volts p-p (TTL) | Operating Temperature range | (-15 to +55°C) |
| Power adapter format | Input AC 100V-240V/ 50HZ,60HZ; Output: USB 5V/0.5A | Weight | 180g |
| Dimension (LxWxH) | 58*52.8*22 (mm) |
USING TIPS
- Re-powering and unplugging the HDMI cable is a common troubleshooting method.
- Hold the reset button for 5 seconds until the input LED blinks 3 times to solve picture flash/black issues.
- Use qualified or brand-new HDMI 2.0 standard cables less than 3 meters.
- Only supports down-scaling 4K to 1080p. Does not support other resolutions for scaling.
- Does not support 4K 60Hz & 1080p 120Hz work in sync.
- Does not support ARC, eARC, CEC, VRR, 4K 120Hz; Not for Sonos ARC.
- SPDIF can only support up to 5.1 (no Atmos). If you need 7.1 or Atmos, please use HDMI OUT.
NOTES
- Place the machine in a location away from damp, high-temperature, dusty, erosive, and oxidant environments.
- Ensure all parts are free from strong shakes, hits, or falls.
- Do not touch the device with wet hands.
- Turn off the power when the machine is not used for a long time.
- Do not open the cover or touch the inside parts.
- Use the original factory power adapter.
- Before powering on, carefully check the connection cables and ensure all interfaces are normally connected.
DISCLAIMERS
The information in this manual has been carefully checked and is believed to be accurate. EZCOO TECHNOLOGY INC. assumes no responsibility for any infringement of patents or other rights of third parties which may result from its use. EZCOO TECHNOLOGY INC. assumes no responsibility for any inaccuracies that may be contained in this document. EZCOO TECHNOLOGY INC. also makes no commitment to update or to keep current the information contained in this document. EZCOO TECHNOLOGY INC. reserves the right to make improvements to this document and/or product at any time and without notice.
CONTACTS
For technical assistance, please send an email to support@easycoolav.com.
Visit https://www.easycoolav.com to learn more.
