ClimaHome-Check Plus

Introduction and Application

The ClimaHome-Check Plus is a digital hygrometer designed to measure ambient temperature and relative humidity. It stores minimum and maximum climate values, alerting users to high air humidity and dryness. The device can help improve room climate, positively influencing health and comfort. Climate data and the current time are clearly displayed. Its features include a fold-out stand for tabletop placement, integral magnets for attachment to objects or metal surfaces, and a wall bracket for mounting.

[!] Please read the operating instructions, warranty booklet, and latest information online before use. Follow all instructions and keep this document with the device.

General Safety Instructions

• Use the device only as intended and within its specified limits.
• Do not modify the device's structure.
• Avoid exposing the device to mechanical stress, extreme temperatures, or significant vibrations.

Safety Instructions

Dealing with Electromagnetic Radiation

The measuring device complies with electromagnetic compatibility regulations and limit values according to EMC-Directive 2014/30/EU. Local operating restrictions, such as in hospitals, aircraft, or near individuals with pacemakers, may apply. Electronic devices can potentially cause or be subject to hazards or interference.

Danger - Powerful Magnetic Fields

Strong magnetic fields can adversely affect individuals with active medical implants (e.g., pacemakers) and electromechanical devices (e.g., magnetic cards, mechanical clocks, precision mechanics, hard disks). National regulations regarding the effect of magnetic fields on people must be observed. To avoid interference, maintain a safe distance of at least 30 cm between the device/magnets and any sensitive implants or devices.

Inserting Battery

Open the battery compartment and insert the battery according to the symbols, ensuring correct polarity is observed.

Device Overview and Operation

Device Components

The ClimaHome-Check Plus features the following components:

• 1. LC Display: Shows time, temperature, humidity, and MIN/MAX values.
• 2. LED / Humidity Warning: Provides visual alerts for humidity levels.
• 3. Timer Setting: Function to set a timer.
• 4. MIN/MAX Value Switching: Button to cycle through minimum and maximum recorded values.
• 5. Fold-out Stand: Allows the device to stand on a flat surface.
• 6. Wall Bracket: For mounting the device on a wall.
• 7. Battery Compartment: Houses the power source.

Display Elements

• a. Time: Displays the current time.
• b. MIN/MAX Values Display: Shows the minimum and maximum recorded temperature and humidity.
• c. Relative Humidity in %rH: Displays the measured relative humidity.
• d. Ambient Temperature in °C: Displays the measured ambient temperature.
• e. Timer: Indicates the timer function.
• f. Humidity Warning: Shows the status of the humidity warning feature.
• g. Acoustic Alarm: Indicates the acoustic alarm status.

Using the Device

1. MIN/MAX Values Display

The device automatically records the minimum and maximum temperature and humidity values. Press the MIN/MAX button once to view the minimum values, and press again to view the maximum values. Pressing the button again returns to the current readings.

2. Reset MIN/MAX Values

To reset the stored minimum and maximum values, press and hold the MIN/MAX button for approximately 3 seconds. The display will briefly show a reset confirmation.

3. Set Timer

Press the Timer button (often labeled with a clock icon or similar) to enter timer setting mode. Use the adjustment buttons (e.g., MIN/MAX and a '+' button) to set the desired hours and minutes. Confirm the setting by pressing the Timer button again.

4. Cancel Timer

To cancel an active or set timer, press the Timer button until the timer display shows '00:00:00' or is deactivated.

5. Set Time

Press the Time button (often labeled with a clock icon or similar) to enter time setting mode. Use the adjustment buttons (e.g., MIN/MAX and a '+' button) to set the current hour and minute. Confirm the setting by pressing the Time button again.

6. Set Humidity Warning

Access the humidity warning settings by pressing the appropriate button (often labeled with a humidity icon or similar). Adjust the desired humidity threshold using the adjustment buttons. The LED indicator will alert you when humidity exceeds or falls below this set point.

Note: The device is optimized for fixed measuring locations. Wait 10 minutes after changing to a location with significantly different climate conditions.

Maintenance and Care

Clean all components with a slightly damp cloth. Do not use cleaning agents, scouring agents, or solvents, as these can damage the device. Store the device in a clean and dry place.

Technical Data

EU Directives and Disposal

This device complies with all necessary standards for the free movement of goods within the European Union (EU). As an electrical product, it must be collected separately for disposal according to the European Directive on waste electrical and electronic equipment.

For further safety and supplementary notices, please visit: http://laserliner.com/info?an=AKO