Corsair LL140 RGB Performance Fans
Performance Fans with Customizable Lighting Modes and Colors
Introduction
The CORSAIR LL RGB series of fans offer high performance and individually customizable RGB LED lighting in one package. Personalize your system lighting and tailor your performance with PWM control.
LL RGB Kit Contents
| Item | Quantity |
|---|---|
| Fans | 2 |
| Fan Hub | 1 |
| CORSAIR Lighting Node PRO | 1 |
| Mounting Screws | 8 |
| Mounting Strips | 2 |
| Fan (Single Fan Kit) | 1 |
| Mounting Screws (Single Fan Kit) | 4 |
Installation
Connection Notes
- Connect the fans in sequential order: 1 ➡️ 2 ➡️ 3 ➡️ 4 ➡️ 5 ➡️ 6.
- Animations begin with fan 1 and proceed through fan 6.
- Any fan not connected in series will break communication and the RGB LED lighting function will not work.
Diagram Description: A diagram shows six fan ports labeled 1 through 6, arranged in two rows of three. Arrows indicate the direction of connection from one port to the next.
Mounting Fans
Mount the fan(s) to the location of your choice in the chassis.
RGB LED Hub Placement
Find a location for the RGB LED hub that allows connection for all the fans' RGB LED cables installed in your system to reach the hub.
The CORSAIR Lighting Node PRO will also need to be plugged into the RGB LED hub for CORSAIR LINK software control of the RGB LED lighting.
Mount the RGB LED hub with the provided mounting strips.
Lighting Node PRO Installation
Turn your system off prior to installing your Lighting Node PRO.
Find a location for the Lighting Node PRO that allows the cable to reach the RGB LED hub and gives you easy access to the buttons.
Mount the Lighting Node PRO with the provided mounting strip.
Plug the mini USB cable into the back of the Lighting Node PRO, then plug the 9-pin end into an available internal USB 2.0 header in your system.
Diagram Description: A diagram shows a motherboard with a USB 2.0 header, a Lighting Node PRO unit, and a mini-USB to USB 2.0 cable connecting them.
LED Hub Installation
Plug the RGB LED cable into an available LED header on the Lighting Node PRO to connect the LED hub.
Connect the SATA power connector to any available SATA connector from your system power supply.
Diagram Description: A diagram shows the LED Hub with six ports labeled 1 through 6, connected via an RGB LED cable to the Lighting Node PRO, which is then connected to a SATA power connector from the power supply.
Download CORSAIR LINK Software
For the full CORSAIR LINK experience, please download our latest CORSAIR LINK software at www.corsair.com/downloads.
* An internet connection is required for software download. CORSAIR LINK is required for lighting control.
