COMMANDER PRO Specifications Package Contents x1 CORSAIR Commander PRO x2 RGB LED hub cables x4 Thermal sensors x4 Fan extension cables x2 Mounting tape x1 Installation guide Commander PRO Unit dimension (L x W x H) 133mm x 69mm x 15.5mm Power input Logic 2.97V to 3.63V
COMMANDER PRO COMMANDER PRO ONE COMMANDER. TOTAL CONTROL. INSTALLATION GUIDE COMMANDER PRO Congratulations! Congratulations on the purchase of your new CORSAIR Commander PRO! The CORSAIR Commander PRO grants superior and accurate hardware control with a compact, all-in-one device. It is fully compatible with CORSAIR LINK devices through two internal USB 2.0 headers, monitors four temperature inputs, and controls up to six fan connectors and two RGB LED channels. Accurately monitor how your system reacts when you push it to the limits. Manage your fans without pressing knobs or switches through the intuitive CORSAIR LINK software. Synchronize your RGB lighting effects with the optional HD RGB fans, SP RGB fans, and individually addressable RGB LED strips to light up your build. Package Contents x1 CORSAIR Commander PRO x2 RGB LED hub cables x4 Thermal sensors x4 Fan extension cables x2 Mounting tape x1 Installation guide Specifications 69mm 15.5 mm 133mm Commander PRO Unit dimension (L x W x H) 133mm x 69mm x 15.5mm Power input Logic Fan 2.97V to 3.63V 4.5V to 5.5V 11.4V to 12.6V RGB LED 4.5V to 5.5V USB 440mm SATA power 465mm Cable Thermal sensor 610mm Fan extension 610mm RGB LED hub 485mm RGB LED channels Two 3-pin connector Max. power for RGB LED channels 4.5A Max. power per fan header (combined) 1A per port (4.5A combined) COMMANDER PRO Installation 1. Turn your system off for the installation of your Commander PRO. 2. Locate an area to mount your Commander PRO. Adhere it onto the desired location with the doublesided tape. 3. Connect any 3-pin or 4-pin fans you wish to control into the 4-pin headers labeled "Fans 1-6". The included fan extension cables can be used if necessary. 4. Connect the thermal sensors to the 2-pin headers labeled "Temp 1-4". TIP: The thermal sensors are designed to measure ambient temperatures, so for the most accurate results, they should not directly touch components. You may find it useful to mount the thermal sensors near air intake and exhaust points, and if your PC case has multiple compartments, you can try placing each of the sensors in its own compartment. Since the thermal sensors can easily be repositioned, you can try various locations and use what works best for you. 5. OPTIONAL: Connect the individually addressable RGB LED strips (sold separately) to the 3-pin connectors labeled "LED 1-2". Alternatively, connect your HD/SP RGB fans to the Commander PRO via the RGB LED hub (sold separately) using the supplied RGB LED hub cables. 6. Connect your LINK hardware such as the Lighting Node PRO (sold separately) into an available 9-pin USB 2.0 header on the Commander PRO. Ensure that these devices are properly powered (see device manual). WARNING! Please refrain from mounting the strips on components (HDD, SSD) that are sensitive to magnets. COMMANDER PRO 7. Plug the USB cable from the Commander PRO into an available internal USB 2.0 header on your PC's motherboard (refer to your motherboard manual for location). 9. For the full CORSAIR LINK experience, please download our latest CORSAIR LINK software. 8. Connect the SATA power connector to any available SATA connector from your power supply. Buy quality computers and hardware in our online store.Adobe PDF Library 15.0