Alex Desk Lamp

Product Overview

The Alex Desk Lamp is a versatile lighting solution designed for indoor use. It features adjustable brightness and color temperature, along with a USB charging port.

Key Features:

• Adjustable brightness levels
• Multiple color temperature settings (6500K, 4000K, 3000K)
• Touch controls for power and settings
• USB 5V 1A charging port
• 5-year guarantee

Assembly and Setup

Package Contents:

• Lamp (A)
• Power Adapter (B)
• CR2032 Battery (for touch control memory)

Step 1: Install Battery

1. Open the battery compartment cover.
2. Insert the CR2032 battery, observing the correct polarity (+).
3. Close the battery compartment cover.

Step 2: Connect Power

1. Connect the power adapter to the lamp.
2. Plug the power adapter into a wall outlet.

Operation

Power On/Off:

• Short touch the power icon to turn the lamp ON or OFF.
• Long touch the power icon to turn the LCD display ON or OFF.

Brightness Adjustment:

• Use the '+' and '-' icons to increase or decrease brightness from 20% to 100%.

Color Temperature Adjustment:

• Touch the 'M' button to cycle through color temperature presets: 6500K, 4000K, 3000K.

Time and Alarm Settings:

• Refer to the detailed diagrams for setting the time, date, and alarms. Use the 'Mode', 'Set', 'Up', and 'Down' buttons to navigate and adjust settings.

Technical Specifications

• Rated Voltage: 12V ===
• Rated Wattage: LED 5.6W total 6.8W
• Ambient Temperature: 25°C
• Protection Class: Class III
• IP Number: IP 20
• Transformer: Class II, INPUT: 220-240V~50/60Hz, OUTPUT: 12V,1A
• Energy Efficiency Class: -(EU) 2019/2015

Maintenance and Cleaning

• Always disconnect the lamp from the power supply before cleaning or maintenance.
• Clean the lamp with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
• Ensure the touch-sensitive surfaces are clean and dry. Do not touch with oily or wet fingers.

Safety Precautions

• Read all instructions carefully before use.
• Keep out of reach of children and unauthorized persons.
• Ensure electrical specifications are compatible with your installation.
• Disconnect power before assembly, maintenance, or cleaning.
• This luminaire is for indoor use only.
• Use only the provided transformer.
• If the external cable or cord is damaged, it must be replaced by the manufacturer, service agent, or qualified person.
• Do not dispose of electrical products with household waste. Recycle according to local regulations.

Troubleshooting

If the lamp does not turn on:

• Check if the power adapter is properly connected to the lamp and the wall outlet.
• Ensure the battery is correctly installed (if applicable).

If the touch controls are not responsive:

• Ensure the touch surfaces are clean and dry.
• Try removing and reinserting the battery.

Warranty and Service

The product comes with a 5-year guarantee.

For service or repairs, contact the store where the product was purchased.

The light source and control gear are not replaceable. If the light source reaches the end of its life, the entire luminaire must be replaced.

Manufacturer Information

ADEO Services

135 Rue Sadi Carnot - CS 00001

59790 RONCHIN - France

Made in China 2021