E Series Technical Specifications
Big Ass Fans E Series fans are powerful, money-saving machines that turn heads as they move air. Whether they're spinning in an auto shop, a warehouse or a factory, E Series fans create noise-free air movement in a big way.
BIG AIR MOVEMENT FOR BIG SPACES
- Models: E7, E10, E12
- Airfoils and Winglets: Six anodized Mini-Ellipto airfoils with plug-style winglets (yellow)
- Gearless Direct Drive Motor: Provides efficient, silent operation; permanent magnet design reduces power consumption
- Onboard Controls: Onboard electronic microprocessors allow for variable speed settings
- Extension Tube: Standard 2 ft (0.6 m); optional 3 to 15 ft (0.9 to 4.6 m)
- Controller: Wired wall controller mounts in standard single-gang junction box or to wall surface; connects with 10 V CAT5 cable and RJ45 connector
- Environment: Suitable for indoor spaces
- Colors: Silver with yellow trim and motor housing
- Efficiency: Provides cooling over the same area as up to 42 standard ceiling fans
Technical Specifications
| Model | Diameter (A) | Weight¹ | Max speed | Airfoil clearances² | Input power and breaker | Sound at max speed³ |
|---|---|---|---|---|---|---|
| E7 | 7 ft (2.1 m) | 69 lb (31.3 kg) | 198 RPM | 10 ft (3 m) above floor 2 ft (0.6 m) on sides |
110-125 VAC, 1 Ф, 50/60 Hz, 10 A | < 35 dBA |
| E10 | 10 ft (3 m) | 76.8 lb (34.8 kg) | 124 RPM | 2 ft (0.6 m) on sides | 200-240 VAC, 1 Ф, 50/60 Hz, 10 A | < 35 dBA |
| E12 | 12 ft (3.7 m) | 82.2 lb (37.3 kg) | 85 RPM | 2 ft (0.6 m) below ceiling deck | 200-240 VAC, 1 Ф, 50/60 Hz, 10 A | < 35 dBA |
¹ Includes mount and 2-ft (0.6-m) extension tube
² E7 and E10 models are suitable for ceilings as low as 13 ft (4 m). E12 model is suitable for ceilings as low as 14 ft (4.3 m).
³ Fans are sound tested at maximum speed in a laboratory environment. Actual results in field conditions may vary due to sound reflecting surfaces and environmental conditions.
Diagrams and Dimensions
Main Fan Assembly: Depicts a large HVLS fan with six blades, a central motor housing, and a mounting pole. The fan has a diameter of 7, 10, or 12 feet. The main assembly drawing shows:
- A total height of 32 inches (813 mm).
- A mounting bracket height of 7.5 inches (191 mm).
- A central circular mounting point with a diameter of 4.71 inches (120 mm).
- Two side mounting points, each with a diameter of 2.96 inches (75 mm) and 2.95 inches (75 mm) respectively.
Standard Colors: Shows two color options for the fan blades: one with yellow airfoil tips and a yellow hub, and another showing a single yellow airfoil tip.
Controller: Displays a wall-mounted controller with a circular dial, power buttons, and speed indicators.
Certifications and Compliance
The fan is certified by ETL Intertek, conforming to UL STD 507 and CSA STD C22.2 No. 113.
Contact and Company Information
Big Ass Fans
- USA: BIGASSFANS.COM, 877-244-3267
- Canada: BIGASSFANS.COM, 844-924-4277
- Australia: BIGASSFANS.COM/AU, 1-300-244-277
- Singapore: BIGASSFANS.COM/SG, +65 6709 8500
©2017 Delta T LLC dba Big Ass Fans. All rights reserved. An ISO 9001 certified company. BAF-MKTG-49-ENG-01 REV. C | November 16, 2018
