Sena DWO-6 Bluetooth Helmet Headset

Product Overview

The Sena DWO-6 Bluetooth Helmet Headset allows users to enjoy music, communicate via intercom with fellow riders, and receive GPS directions. It features Bluetooth 4.1, HD speakers, a microphone with Advanced Noise Control™, FM Radio, and Music Sharing capabilities. The headset supports intercom communication up to 1 km (0.6 miles) and can connect with up to four-way intercom.

Key Features:

• Bluetooth 4.1
• Intercom up to 1 km / 0.6 miles
• Up to four-way intercom
• FM Radio
• Advanced Noise Control™
• Music Sharing

Getting Started

This guide is a basic version of the User's Guide. A full version can be downloaded at oem.sena.com/cyclegear.

To ensure you have the latest features, update the product's firmware for free by visiting oem.sena.com/cyclegear.

Distributors:

• Cycle Gear: www.cyclegear.com
• Revzilla: www.revzilla.com
• J&P Cycles: www.jpcycles.com

Button Operation

Button Identification:

• (+) Button
• Center Button
• (-) Button
• DC Power Charging & Firmware Upgrade Port

Basic Operations:

• Tapping: Tap the button once.
• Double Tapping: Tap the button twice quickly.
• Press for 1 sec: Press and hold the button for 1 second.
• Press and Hold (3 sec, 5 sec): Press and hold the button for the specified duration.

Power On/Off:

• Power On: Press and hold the Center Button and the (+) Button for 1 second.
• Power Off: Tap the Center Button and the (+) Button.

Volume Adjustment:

• Volume Up/Down: Tap the (+) Button or the (-) Button.

Bluetooth Pairing (Phone, MP3, and GPS)

1. Press and hold the Center Button for 10 seconds until the Status LED indicates pairing mode (flashing blue and red).
2. On your phone, MP3 player, or GPS device, search for Bluetooth devices and select "BILT DWO-6 v1.0".
3. If prompted for a PIN, enter "0000".

Mobile Phone Functions

• Answer Call: Tap the Center Button.
• End Call: Press and hold the Center Button for 2 seconds.
• Reject Call: Press and hold the Center Button for 2 seconds.
• Voice Dial: Press and hold the Center Button for 3 seconds.
• Speed Dial: Press and hold the (+) Button for 3 seconds.

Music Control

• Play/Pause Music: Press and hold the Center Button for 1 second.
• Track Forward/Back: Press and hold the (+) Button or the (-) Button for 1 second.

Intercom Functions

Headset Pairing:

• Pair Headset A with Headset B: On both headsets, press and hold the Center Button for 5 seconds until the Status LED flashes red four times. Then, tap the Center Button on one of the headsets.

Start/End Intercom:

• 1st Friend: Tap the Center Button.
• 2nd Friend: Double tap the Center Button.
• 3rd Friend: Triple tap the Center Button.

Radio Functions

• Radio On/Off: Press and hold the (-) Button for 1 second.
• Seek Stations: Double tap the (+) Button or the (-) Button.
• Scan Up FM Band (Start/Stop): Press and hold the (+) Button for 1 second.
• Save to Preset: While scanning, tap the Center Button.
• Move to Preset Station: Press and hold the Center Button for 1 second to cycle through presets 1-10.
• Save Preset: Press and hold the (+) Button for 1 second.
• Delete Preset: Press and hold the (-) Button for 1 second.

Settings

Configuration Menu:

• Access the configuration menu by pressing and holding the Center Button for 10 seconds.

Troubleshooting

Factory Reset:

• To restore default settings, use the Factory Reset option in the configuration menu. The headset will automatically reset and turn off.

Fault Reset:

• If the headset is not functioning correctly, gently push the pin-hole reset button located below the (+) button.

Quick Reference