Overview
The Manitowoc Indigo NXT Series iT0450 ice machine is designed for operators who recognize ice as critical to their business. Its preventative diagnostics continuously monitor the machine for reliable ice production. Enhancements in cleanability and programmability make the ice machine easy to own and less expensive to operate.
Key Features & Performance
- New Levels of Performance: Offers an average of 9% lower energy consumption, up to 12% increase in ice production, and a 19% reduction in condenser water usage, translating to lower cost of ownership.
- easyTouch® Display: A new icon-based touch screen simplifies operation and troubleshooting.
- Multiple Language Capability: The easyTouch display supports multiple languages, selectable during the initial start-up installation wizard.
- Programmable Ice Production: Allows users to program the machine to be off during specific times to save on electricity costs, or by daily ice production volume.
- Easy to Clean Foodzone: Features a hinged front door that swings out for easy access. Removable water-trough, distribution tube, curtain, water probe, and water pump facilitate fast and efficient cleaning. Selected components are made with AlphaSan® antimicrobial protection.
- Intelligent Diagnostics: Provides 24-hour preventative maintenance and diagnostic feedback for reliable operation.
- Acoustical Ice Sensing Probe: A patented technology ensures reliable operation in challenging water conditions and environments.
- LuminIce® II Growth Inhibitor: Controls the growth of bacteria and yeast within the food zone, keeping the machine cleaner for longer. An indicator on the display monitors its operational status.
Commercial Warranty
Ice Maker Evaporator: 3 Year Parts and Labor
Compressor: 5 Year Parts, 3 Year Labor
General Specifications
Model: iT0450 Ice Cube Machine
Electrical: 50Hz, 230/50/1
Minimum Circuit Ampacity: Air-cooled: 5.6 amps; Water-cooled: 5.3 amps
Maximum Fuse Size: Air-cooled: 15 amps; Water-cooled: 15 amps
BTU Per Hour: 3,800 (average), 6,000 (peak)
Refrigerant: R410A (Environmentally friendly refrigerant with ~48% lower global warming potential)
Operating Limits
- Ambient Temperature Range: 40° to 110°F (4.4° to 43.3°C)
- Water Temperature Range: 40° to 90°F (4.4° to 32.2°C)
- Water Pressure (Ice Maker Inlet): Min. 20 psi (137.9 KPA); Max. 80 psi (551.1 KPA)
- Condenser Water Pressure: Min. 20 psi (137.9 KPA); Max. 276 psi (1902.95 KPA)
Ice Shapes
- Half Dice: 3/8" x 1/8" x 7/8" (0.95 x 2.86 x 2.22 cm); Cube weight: 5.7 g
- Dice: 7/8" x 7/8" x 7/8" (2.22 x 2.22 x 2.22 cm); Cube weight: 8.5 g
Ice Production and Power Usage
| Model | Ice Shape | Ice Production 24 Hours | Power Usage (kWh / 45.4 kg of Ice) | Potable Water Usage / 45.4 kg of Ice | |
|---|---|---|---|---|---|
| 21°Air / 10°C Water | 32°Air / 21°C Water | @ 32°Air / 21°C Water | |||
| IDT0450A | Dice | 440 lbs. (200 kgs) | 355 lbs. (161 kgs) | 5.30 (1 Ph) | 19 Gal. (71.9 L) |
| IYT0450A | Half-Dice | 460 lbs. (209 kgs) | 375 lbs. (170 kgs) | 5.20 (1 Ph) | 19 Gal. (71.9 L) |
| IDT0450W | Dice | 420 lbs. (191 kgs) | 355 lbs. (161 kgs) | 4.88 (1 Ph) | 19 Gal. (71.9 L) |
* Water-cooled Condenser Water Usage / 45.4 kgs of Ice: 140 gal / 530 L.
Dimensional Information
iT0450 on D-400 / D-570 Storage Bins
| iT0450 on D-400 Bin | iT0450 on D-570 Bin | |
|---|---|---|
| Height | 59.50" (151.13 cm) | 71.50" (181.61 cm) |
| Width | 30.00" (76.2 cm) | 30.00" (76.2 cm) |
| Depth | 34.00" (86.30 cm) | 34.00" (86.30 cm) |
| Bin Storage | 365 lbs. (165.7 kgs) | 543 lbs. (241.1 kgs) |
Note: Bin leg height is adjustable from 6.00" to 8.00" (15.24 to 20.32 cm). Bin capacity is based on 90% of volume at an average ice density of 33 lbs/ft³.
Installation Clearances
Minimum Installation Clearance:
- Top/Side: 12" (30.50 cm)
- Back: 5" (12.7 cm)
Port Descriptions (Refer to Diagram)
- A: Electrical Entrance (2) Options
- B: 3/8" F.P.T. Water Condenser Inlet (for water-cooled units)
- C: 1/2" F.P.T. Water Condenser Outlet (for water-cooled units)
- D: 1/2" Auxiliary Base Drain Socket
- E: 3/8" F.P.T. Ice Making Water Inlet
- F: 1/2" F.P.T. Ice Making Water Drain
- G: 3/4" Bin Drain
Diagram Description: A technical drawing illustrates the iT0450 ice machine on a D-400 bin, detailing dimensions and port locations labeled A through G. A separate graphic compares the dimensions and storage capacity of the iT0450 on D-400 and D-570 bins.
Optional Accessories
- LuminIce® II Growth Inhibitor: Reduces yeast and bacteria growth for a cleaner ice machine.
- External Scoop Holder: Protects the ice scoop with an NSF-approved holder.
- Arctic Pure® Plus Water Filters: Reduce sediments and chlorine contaminants down to 0.5 microns. A pre-filter is recommended.
Company Information & Certifications
Contact Information:
- Welbilt Deutschland GmbH
Auf der Weih 11, D - 35745 Herborn, Germany
Tel.: +49 27 72 58 050
welbilt.com.de - Welbilt Iberia, S.A.U
Textil, 6 - Pol.Ind. La Ferreria, 08110 Montcada i Reixac, Barcelona, Spain
Tel.: +34 902 20 10 69
welbilt.com.es - Welbilt UK
Ashbourne House, The Guildway, Old Portsmouth Rd, Guildford GU3 1LR, United Kingdom
Tel.: +44 1483 464900
www.welbilt.uk
Certifications: NSF, CE, AQ, ISO 9001:2015
Welbilt reserves the right to make changes to the design or specifications without prior notice.
