KINGRINDER Lightweight Manual Coffee Grinder
Instruction Manual
Product Contents
- Grinder Mill
- Handle
- Anti-slip Sleeve
- Brush
Model Series: P0/P1/P2
How to Use
- Remove the catch cup and attach the handle.
- Hold the handle and tighten the spin dial clockwise.
- Adjust the grind size by turning the spin dial counter-clockwise. (Refer to the table below for recommended click counts.)
- Replace the catch cup, remove the handle, and add 20-25g of coffee beans.
- Attach the handle and begin grinding.
Grind Size Guide
Approximately 30 clicks per full rotation
Brewing Method | P0 | P1 | P2 |
---|---|---|---|
Espresso | Not Recommended | 30 clicks | 30 clicks |
Moka Pot / Aeropress | 40 clicks | 40 clicks | 40 clicks |
Drip | 45-60 clicks | 45-60 clicks | 45-60 clicks |
French Press | 75 clicks | 75 clicks | 75 clicks |
Care Instructions
- Remove the catch cup and attach the handle.
- Hold the handle and continue turning the spin dial counter-clockwise until it comes off.
- Disassemble all parts (as shown in the photo).
- Clean residual grounds using an air blower or brush.
- Reassemble the parts in order.
Precautions
- This product is not washable. Please clean it with the included brush.
- Do not turn the handle when the spin dial is at zero or 8 clicks or less. This may damage the grinder blades.
- For precision, do not disassemble the outer blade and shaft using tools.
- Avoid grinding anything other than coffee beans, or unroasted beans.
- This product is made of plastic, and there may be slight seams or minor marks, which is a normal phenomenon.