Denver LDS-5575 Smart TV
Quick Start Guide
This document provides a quick start guide for the Denver LDS-5575 Smart TV. It covers essential information regarding safety, connections, channel installation, and basic operation. For comprehensive details, please refer to the full user manual available on the Denver Electronics website.
Model: LDS-5575
Find the full user manual by searching for this model number at www.denver-electronics.com.
Safety Information
IMPORTANT SAFETY INSTRUCTIONS - READ CAREFULLY BEFORE USE.
Take note of the following safety information:
- CAUTION: TO PREVENT ELECTRICAL SHOCK, DO NOT REMOVE ANY SCREWS AND COVERING. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
- Symbol 1: This symbol indicates important information in the accompanied operating instructions. Always read this information carefully.
- Symbol 2: This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit.
Read and keep these instructions:
- Do not use this product near water.
- Clean the product only with a slightly damp cloth.
- Do not block any ventilation openings on the product.
- Install this product in accordance with the supplied Quick Start Guide and the User Guide.
- Protect the power cable from being walked on or pinched, particularly at plugs and the point where it exits from the TV.
- Do not allow the power cable to overhang the edge of a table.
- Unplug the product during lightning storms or when unused for a long period of time.
WARNING! TO REDUCE THE RISK OF FIRE OR ELECTRICAL SHOCK, DO NOT EXPOSE THIS TV TO RAIN OR MOISTURE. THE TV MUST NOT BE EXPOSED TO DRIPPING AND SPLASHING AND NO OBJECTS FILLED WITH LIQUIDS SHOULD BE PLACED NEAR THE TV.
NOTE: No naked flames such as candles should be placed near the TV.
Smell/Odor from TV
New televisions may emit an unusual smell or odor when first turned on. This is due to the manufacturing process of components. The smell will usually dissipate within a few days of use and is normal for many electronic products. Ensure sufficient ventilation around the TV and in the room for the odor to dissipate.
Connections
The rear and side panels of the TV provide various connection ports:
- LAN (RJ45) port: Connect an RJ45 plug to an external modem or network access equipment.
- HDMI ports: Connect a DVD/Blu-ray player or other HDMI device.
- TV1 (S2) jack: Connect a satellite signal.
- TV2 (T2/C) jack: Connect to an aerial socket on the wall with the RF coaxial cable.
- OPTICAL jack: Connect to an external digital audio device.
- CI (Common Interface) slot: For a CI module.
- AV jacks: Connect to the audio & video output terminals of a DVD player.
- USB port: Connect to a USB device for multimedia playback.
- AUDIO-OUT jack: Connect to an external audio device.
Installation of TV Channels
This TV is equipped with a triple digital tuner:
- Digital terrestrial TV: DVB-T2 - H.265 HEVC
- Digital cable TV: DVB-C
- Digital satellite TV: DVB-S2
The TV also has an analogue tuner.
Upon first use, a first-time setup wizard will appear. You can select your language and country using the left/right arrow buttons. Press OK to confirm settings and proceed to the auto tuning menu.
Tuning Modes:
- Select tuning mode: DTV (digital TV), ATV (analogue TV), or Both.
- Select digital tuning mode:
- DVB-T: For terrestrial reception (requires an antenna).
- DVB-C: For cable reception (requires information from your cable provider, such as Network ID, Frequency, Symbol rate, and LCN settings).
- DVB-S: For satellite reception (requires knowledge of your satellite dish's alignment).
For DVB-T, an auto scan will find all available channels. For DVB-C, you can perform a full scan or a network scan. For DVB-S, you will need to select the appropriate satellite.
Streaming and Network Settings
The TV features a Common Interface+ input, allowing insertion of a CA module from your TV/cable provider for pay-to-view channels. Refer to instructions on the TV's back panel for CA module installation.
Access streaming services like Netflix, YouTube, and Prime Video directly from the home menu. Press the ? [Home] button on the remote control to display the home menu. Use the arrow buttons (⬆️ [Up], ⬇️ [Down], ⬅️ [Left], ➡️ [Right]) to select an item or app, then press [OK]. Hotkeys on the remote may also provide direct access to apps.
Network Settings
To enjoy online services, connect your Smart TV to the internet. You can choose between a Wired connection or Wifi. You may also skip this step.
Attaching the Stand
The pictures provided are for reference only.
1. Supplied Accessories:
Ensure you have the following parts:
- TV set
- Stand (typically two pieces)
- 4x screws (M5 x 20)
Before installing the stand: Check for any visible damage or missing parts. Contact customer service if issues are found.
2. How to Install the Stand:
Place the TV face down on a soft, flat surface (e.g., blanket, foam, cloth) to prevent scratches.
Attach the stand to the bottom of the TV as shown in the diagrams. Ensure the correct orientation (front/rear) of the stand pieces is observed. Secure the stand tightly with the supplied screws. Improper attachment can lead to instability or the TV tipping over.
3. Warnings:
- ❌ [Incorrect] Do not tilt the stand forward or backward. This may damage the stand.
- ❌ [Incorrect] Do not tilt the stand leftward or rightward. This may damage the stand.
Ensure screws are attached tightly to prevent instability or tipping.
Disposal and Further Information
Please notice: All products are subject to change without notice. Denver Electronics A/S reserves the right to correct errors and omissions in this manual.
Copyright © Denver Electronics A/S. All rights reserved.
Environmental Information:
Electric and electronic equipment, including batteries, may contain hazardous materials. Dispose of waste material correctly, separate from household waste, according to local regulations. The ♻️ [Recycling Symbol] indicates that this equipment and its batteries should not be disposed of with other household waste.
Submit used batteries to designated recycling facilities. This ensures compliance with legislation and protects the environment.
Collection points for electric and electronic equipment and batteries are available in most cities. For more information, contact your city's technical department.
Finding the Full Manual:
Visit www.denver-electronics.com. Click the search icon and enter model number: LDS-5575. The full manual and other directives can be found under downloads.
Product Specifications:
- Model: LDS-5575
- Operating Frequency Range: 177MHz ~ 803MHz
- Max Output Power: 155W
Manufacturer Information:
DENVER ELECTRONICS A/S
Omega 5A, Soeflen
DK-8382 Hinnerup
Denmark
Connect with Denver Electronics on Facebook: www.facebook.com/denverelectronics
Denver A/S
