FCC Compliance Information Statement

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

TP-Link Systems Inc. has determined that the equipment shown above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change made in the equipment and the equipment is properly maintained and operated.

Issue Date: 2024-7-25

CE Mark Warning

This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/30/EU, 2014/35/EU, 2011/65/EU and (EU)2015/863.

The original EU Declaration of Conformity may be found at https://www.tp-link.com/en/support/ce/

UKCA Mark

TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Electromagnetic Compatibility Regulations 2016 and Electrical Equipment (Safety) Regulations 2016.

The original UK Declaration of Conformity may be found at https://www.tp-link.com/support/ukca

Canadian Compliance Statement

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :

• L'appareil ne doit pas produire de brouillage;
• L'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

Industry Canada Statement: CAN ICES-3 (B)/NMB-3(B)

Packaging Elements: Elements of packaging to be separated and placed in the sorting bin. This device and its accessories are recyclable. Dispose of at collection points. Prioritize repair or donation of your device!

Safety Information (Chinese)

• Use the original power adapter or only use the power type specified for this product.
• Disconnect the power cord before cleaning the product. Do not use liquid or spray cleaners or a wet cloth for cleaning.
• Beware of moisture; do not spill water or other liquids onto the product.
• Slots and openings are for ventilation to ensure reliable operation and prevent overheating. Do not block or cover the openings.
• Do not place the product near heat sources. Do not place it in enclosed spaces without normal ventilation.
• Do not open the casing or attempt to repair it yourself. If the product is faulty, please contact the manufacturer or agent.
• The power adapter should be used indoors in an environment with a temperature of 40℃ or lower.

Restricted Substances Statement

Equipment Name: Network Camera

Type Designation: InSight S345/InSight S355/InSight S385/InSight S445/InSight S455/InSight S485/InSight S245/InSight S285/InSight S225/InSight S245ZI/InSight S345ZI/InSight S445ZI/InSight S385PI/InSight S485PI/InSight S6551/InSight S345S/InSight S445S

Note 1: “Exceeding 0.1 wt %” and “exceeding 0.01 wt %” indicate that the percentage content of the restricted substance exceeds the reference percentage value of presence condition.

Note 2: ○ indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence.

Note 3: — indicates that the restricted substance corresponds to the exemption.

Ukraine Conformity: The product is certified in accordance with the system of Ukraine's UkrSEPRO for compliance with regulatory documents and requirements stipulated by current legislative acts of Ukraine.

EAC

Safety Information

• Keep the device away from water, fire, humidity or hot environments. (For indoor cameras)
• Keep the device away from fire or hot environments. DO NOT immerse in water or any other liquid. (For outdoor cameras)
• Do not attempt to disassemble, repair, or modify the device. If you need service, please contact TP-Link.
• This product can be powered only by power supplies that comply with Power Source Class 2 (PS2) or Limited Power Source (LPS) of IEC 62368-1. (For PoE cameras)
• Do not use a damaged charger or USB cable to charge the device.
• Do not use any other chargers than those recommended.
• Adapter shall be installed near the equipment and shall be easily accessible.
• Use only power supplies which are provided by manufacturer and in the original packing of this product. If you have any questions, please contact TP-Link.
• Operating Temperature: -30 ℃ - 60℃

Please read and follow the above safety information when operating the device. TP-Link cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.

Explanations of the symbols on the product label

Note: The product label can be found at the bottom of the product and its I.T.E. power supply. Symbols may vary from products.

Recommended Power Adapters