User Manual for iGET models including: DS1 Video Doorbell, DS1, Video Doorbell, Doorbell
31 dic 2021 — Please read the user manual before use ... 2*18650 5200mAh Battery (charge 4-8h ... Video doorbell can be used with door chime (products already.
File Info : application/pdf, 16 Pages, 20.86MB
DocumentDocumentVIDEO DOORBELL DS1 User Manual - EN Please read the user manual before use CONTENTS 1. Product Description ............................. 1-2 2. Paired with Door Chime ........................... 3 3. Download APP and Connect .................. 4-6 4. Setting ................................................. 7 5. Share Device ..................................... 7 6. Remove Device .................................. 8 7. More Services .................................... 9 8. Product Installation............................... 9-10 9. Functions ........................................... 11 10. FAQ ............................................... 11-12 11. Safety precautions, declaration ............ 13-14 1. Product Description Light Sensor MIC PIR Sensor Waterproof Cover Camera TF Card Slot Ring Button Indicator Light Speaker Anti-theft Hole (camera can be locked by a screw) External Power Port (AC&DC12-24V/1A) USB Port Reset Technical Parameters APP Power Supply Doorbell Button Indicator Light Microphone iGET HOME 2*18650 5200mAh Battery (charge 4-8h for first use, charge adapter: 5V/2A2A. External Power Input: AC&DC12-24V/1A Press the button to activate the doorbell Red light solids on: the camera network is abnormal Red light blinking: waiting for connecting WiFi or being connected now (faster blinking) Blue light solids on: camera running correctly Captures sound for your video 1 Sensor type Pixel Min llluminance Viewing Angle Shutter IR WDR Video Compression Standard Compression Output Bit Rate Maximum Image Resolution Frame Rate Audio Storage 1/3" CMOS 2-mega pixel Min Color 0.01Lux@F1.2 Color 0.01Lux@F1.2 Black and White 0.001Lux@F1.2 170° 1/25~1/100,000 per second 4pcs 5mm 850nm LED Digital WDR H.264/H.265 32Kbps~2Mbps 1920×1080 1~25 per second Full duplex audio TF Card (Max. 128G) & Cloud Storage Image Setting Reset Interface Protocol Communication Protocol General Function WIFI Triggering Method Working Temperature & Humidity Support HD/SD, support mirror Support Private TCP/IP, HTTP, DHCP, DNS Dual stream, password protection Support 2.4G WIFI IEEE802.11b/g/n Support button triggering, PIR motion detection triggering -20¥~50¥, humidity less than 90% (without condensation) Waterproof IP65 2 2. Paired with Door Chime Volume Previous music Next music Set Video doorbell is turned on before pairing with the door chime: Video doorbell can be used with door chime (products already have been paired in factory.) If you need to replace the video doorbell, increase or decrease the doorbell quantity, please follow steps below: 1. Learning code pairing Press and hold "Set" button for about 3 seconds, the door chime will ring (Bird voice), press the video doorbell 2 times within 30 seconds. If door chime rings, the pairing is successful. If door chime does not ring, please press the video doorbell again until pairing is successful. For matching multiple video doorbell, please repeat the above operation. 2. Delete pairing Press and hold "Set" button about 10 seconds until the door chime rings two times. All pairing code will be deleted completely. 3 3. Download APP and Connect iGET HOME is available for both IOS and Android. Search the name "iGET HOME" in APP Store or scan the QR-code to download the APP. Support Set Up Router This device only supports 2.4GHZ wifi router, does not support 5GHZ router, please set the relevant parameters of the router before WIFI configuration. WIFI password is not allowed to include special characters such as ~!@#$%^&*() etc. When configure wifi for the device, the mobile phone and device are as close as to the router, which can speed up the configuration of device. Registration Process Open the iGET HOME APP, click "Register", read the "Privacy Policy " and click "Agree". Input a legal and valid mobile number or email address, , then click "Continue". And enter verification code, then log in the APP. Connect 1 Click "Add Device" or "+" icon to add camera. Click "Security & Video Surveillance" >> "Smart Camera(Wi-Fi)" or "Smart Doorbell". 4 2 In "Add Device" interface, click "Next" icon, then enter WIFI name and password. Note 1) Camera only supports 2.4GHZ WIFI network. 2) WIFI name and password mustn't exceed 24 digits. 3) Please make sure the indicator light is flashing quickly before entering into WIFI page. If not, please try to reset device. 5 3 Use video doorbell to scan the QR code in the mobile phone (please place the mobile phone QR code facing the video doorbell about 15-20cm) until hear doorbell "dong dong" sound prompt and doorbell indicator flashes blue. Then click "I Heard a Prompt" icon. 4 When connecting, please make sure your router, mobile phone and doorbell are as close as possible. When doorbell added successfully, you can click " " icon to Rename the doorbell. 6 4. Setting In the "Smart Video Doorbell" interface, you can click " to set the doorbell basic functions. " icon Battery Power Tip: The battery power and charging status can be checked in the APP "Smart Video Doorbell" interface. indicates battery power status. indicates battery in charging status. 5. Share Device In "Smart Video Doorbell" interface, you can click "Share Device" icon, then chick "Add Sharing" icon and enter their phone number or email to share the device. Remark: Please tell shared members to download and register iGET HOME APP first 7 6. Remove Device Remove device 1. In "home" interface, click "Device Management" in the "..." icon, then select the smart video doorbell and click "Remove Device" to remove the device. 2. In "Smart Video Doorbell" interface, click" " icon, and click "Remove Device" at the end of setting interface to remove it. Remove shared device If you don't need to share the device, you can click the shared account, swipe left to click "Delete", and no more share the device ******** 8 7. More Services If you want to experience more services, you can click "Me" icon, then click "Third-Party Voice Services">>"More>" (like Alexa, Google Assistant etc. voice service) or "Featured" (like Cloud Storage, Message Notification etc. service) but it may have charge for the service. Please check the app tips for specific fees. 8. Product Installation Before installation, please complete the operation as per user manual and place the doorbell in the installation location to test doorbell work well or not. Note: Don't install the doorbell on the metal door to avoid metal door shield the wifi signal. Doorbell Installation Methods 1. 3M double-sided tape installation: 1 Tear off the double-sided tape on the doorbell back plate. 9 2 Fix the doorbell back plate to the wall (make sure smooth & dust-free surface), and press about 30 seconds to fix it. 3 Fix the doorbell to the back plate, then fix with anti-theft screw. 2. Screw installation: 1 Use the doorbell back plate to locate the hole, drill the hole and fix the screw rubber plug to the hole. 2 Fix the doorbell back plate with screws to the rubber plug. 3 Fix the doorbell to the back plate with anti-theft screw. Doorbell Disassembly Unscrew the anti-theft screw with screwdriver, then grab the doorbell and push it up to remove. 10 9. Functions Two Way Audio When the visitor push the doorbell button, you will get a call notification. You can see and hear the visitor if get through the call in your APP. PIR Motion Detection Call notification will be sent to your phone APP when movement is detected. Share Device The doorbell can be shared with families and friends and they can also preview online. Record Record every moment using SD card storage or cloud storage. Night Vision Powerful night vision means no interruptions even in the night. Daytime Night 10. FAQ Q What should I pay attention to when testing? A Please read our manual carefully before testing, if any questions, please check with our factory. Most importantly, when speak with visitor in front of doorbell, pls place the phone at least 5m away from the doorbell, which won't cause signal interference or noise. 11 Q When does the doorbell need to be reset? And how to reset? A It needs to be reset when the doorbell couldn't work well normally or can't be connected to the phone. You can use the screwdriver or other tooling to press the Reset hole for about 10 seconds to reset. Q How to do if repeated adding failed? A After adding failed for first time, please reset the doorbell or power off, then try to add again. And it only supports 2.4GHZ WIFI router, please make sure you are using a 2.4GHZ WIFI router, also correct wifi password. Q The doorbell video cannot be previewed properly? A Check whether network is good or not, you can place the doorbell close to the router. If still not works, pls reset the doorbell and add again. Q How to change doorbell network to another router? A Remove the device on the APP and configure the device again. Q Why Can't I receive the push message notification by phone APP? A Please confirm that the APP has been running well on the phone, and relevant reminder function has been opened like message notification and authority confirmation in the phone system. Q Why doesn't the device identify the SD card? A: Please insert the SD card before doorbell powered on. And make sure whether SD card is good and FAT32 format or not. 12 Safety Precautions: Avoid exposure to magnetic fields. Keep the device away from medical devices. Avoid extreme temperatures (-30°C, +50°C). Keep the device dry. If such cases may occur, please, contact the authorized service or your distributor: Moisture got into the device. The device is mechanically damaged. The device is extremely overheated. 1)For household use: The given symbol (crossed-out wheeled bin) on the product or at accompanying documents means that used electrical and electronic products should not disposed of with household waste. To ensure proper disposal of the product, hand it over to a designated collection point, where it will be accepted free of charge. The correct disposal of this product will help to save valuable natural resources and prevent any potential negative impacts on the environment and human health, which could otherwise be caused by inappropriate disposal of wastes. For more details, please, contact your local authorities or the nearest collection point. The improper disposal of this waste can be penalized in accordance with national regulations. Information for users to disposal of electrical and electronic devices (corporate and business use): For proper disposal of electrical and electronic devices, ask for details from your dealer or distributor. Information for users to disposal of electrical and electronic devices in other countries outside EU: The above mentioned symbol (crossed-out wheeled bin) is valid only in the countries of EU. For proper disposal of electrical and electronic devices, ask for details from your authorities or dealer. All is expressed by the symbol of crossed-out wheeled bin on product, packaging or in printed materials. Set up the claim for warranty repair of device at your dealer. If you have technical questions or problems, contact your dealer. Follow the rules for working with electrical equipment. The user may not dismantle the device or replace any part of this. Opening or removing the covers poses the risk of electric shock. In case of incorrect reassembly and subsequent connection you are also exposed to electric shock. Declaration of Conformity: Company INTELEK spol. s r.o. hereby declares that all DS1 and CHS1 devices are in compliance with essential requirements and other relevant provisions of Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available on this website www.iget.eu. 13 The warranty period of the product is 24 months, unless stated otherwise. RoHS: The components used in the device meet the requirements on the restriction of hazardous substances in electrical and electronic devices in accordance with Directive 2011/65/EU. The RoHS declaration can be downloaded from www.iget.eu. Operation of radio equipment: CZ: This radio equipment can be operated in the Czech Republic under the General Authorizations VO-R / 1 / 05.2018-2 and VO-R / 12 / 09.2010-12. SK: This radio equipment can be operated under General Authorizations VPR - 07/2014, VPR - 02/2018 and VPR - 35/2012. Exclusive importer/producer of iGET products to EU: INTELEK spol. s r.o., Headquarters: Olivova 2096/4, 11000 Praha - Nové Msto, CZ, Branch: Ericha Roucky 1291/4, 627 00 Brno - Cernovice, CZ, http://www.iget.eu SUPPORT: http://www.iget.eu/helpdesk Copyright © 2021 INTELEK spol. s r.o., All rights reserved. This device can be used in the following countries: Restrictions on WiFi use: Italy - The conditions for using the WiFi network are described in the so-called Electronic Communications Code. Norway - The 2.4 GHz limitation applies only to the area 20 km from colony of Ny-Ålesund.