Brookstone Wireless Cat Ear Headphones

Product Overview

Enjoy your music privately or turn on the ear speakers to share with friends with the Brookstone Wireless Cat Ear Headphones.

Warnings and Cautions

DANGER

• To reduce the risk of electric shock, burns, fire or injury:
• Do not use while bathing or in a shower.
• Do not place or store unit where it can fall or be pulled into a tub or sink.
• Do not place in, drop or submerge in water or other liquid.
• Do not reach for a unit that has fallen into water. Unplug it immediately.
• Care should be taken so that objects do not fall and liquids are not spilled onto the unit.

CAUTION

• To reduce the risk of electric shock, do not remove cover. There are no serviceable parts inside.
• To reduce the risk of fire or electric shock, do not expose this unit to rain or moisture.
• [Warning Symbol: Lightning flash with arrow-head] The lightning flash with arrow-head symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage" within the unit's enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
• [Warning Symbol: Exclamation point] The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the unit.

IMPORTANT SAFETY INSTRUCTIONS

All the safety and operating instructions should be read, heeded, adhered to and followed before the unit is operated.

For maximum product life, do not drop, throw or crush the headphones. Do not expose them to humidity, dust, or operating temperatures outside 32°F to 113°F (0°C to 45°C).

[Recycling Symbol: BC] This device contains a non-removable Lithium-Ion battery. The battery must be recycled or disposed of properly. Contact your local waste management office for information on battery recycling or disposal.

Location of Parts and Controls

Left Ear Cup (Bottom/Top)

• 1. Speaker with Light (2)
• 2. Right Ear cup
• 3. Ear cup Light (2)
• 4. Left Ear cup

Headphone Cord / Other Components

• 5. 3.5mm to 3.5mm Headphone Cord with in-line microphone
• 6. Play/Pause/Track Forward/Track Back Button
• 7. Micro USB Charging Cable
• 8. Light On/Off/Choose Color Button
• 9. Light Mode Button
• 10. Speakers On/Off Button
• 11. Headphone Cord Input
• 12. Volume + Button
• 13. Play/Pause/Track Forward/Track Back Button
• 14. Volume - Button
• 15. Pairing/Charging LED Indicator
• 16. Micro USB Input
• 17. Bluetooth® Button

Diagram Description: The diagrams show the left and right ear cups with numbered controls and ports. The headphone cord is also illustrated with its connection ends.

Charging the Cat Ear Headphones

1. Use the included Micro USB Charging Cable to charge the headphones with a USB adapter (5V, 1A or above) (not included). The headphones will be fully charged in approximately 3 hours.
2. The CHARGING LED INDICATOR is red while the headphones are charging and turns off when they are fully charged.
3. When the headphones' battery is low, the CHARGING LED INDICATOR will flash red (when not in Bluetooth mode) or flash red and blue (when in Bluetooth mode).

Pairing Your Device

1. Prepare your device to pair using Bluetooth® wireless technology, ensuring you are within 33 feet of the headphones. Refer to your device's owner's manual for details if necessary.
2. Press and hold the BLUETOOTH BUTTON until the PAIRING LED INDICATOR illuminates and four tones sound to turn Bluetooth® mode on.
3. The PAIRING LED INDICATOR will be solid blue for 5 seconds as the headphones search for previously paired devices. If no connection is made within 5 seconds, the headphones will enter Bluetooth® pairing mode, indicated by the PAIRING LED INDICATOR flashing blue and two tones sounding.
4. Once the headphones are in pairing mode and your device is ready to pair, select "Cat Headphones" on your device. If prompted, use 0000 as a PIN for the pairing code. Once "Cat Headphones" is selected, the PAIRING LED INDICATOR will change to solid blue and one tone will sound to confirm pairing is complete.

Note: After initial pairing, the headphones should automatically pair with your device when Bluetooth® mode is activated. You may need to select "Cat Headphones" in your device's Bluetooth® menu.

To cancel pairing mode, press the BLUETOOTH button to turn off Bluetooth® mode or wait 5 minutes for the headphones to automatically cancel pairing mode and turn off Bluetooth® mode. The PAIRING LED INDICATOR will turn off.

Listening to Audio

1. Press and hold the BLUETOOTH BUTTON until the PAIRING LED INDICATOR illuminates to turn Bluetooth® mode on.
2. Press the VOLUME + BUTTON to increase audio volume.
3. Press the VOLUME - BUTTON to decrease audio volume.
4. Press the PLAY/PAUSE/TRACK FORWARD/TRACK BACK BUTTON once to play or pause audio.
5. Press the PLAY/PAUSE/TRACK FORWARD/TRACK BACK BUTTON twice in quick succession to move one track forward.
6. Press the PLAY/PAUSE/TRACK FORWARD/TRACK BACK BUTTON three times in quick succession to move one track backward.

Note: If there is no audio streaming for 20 minutes, Bluetooth® mode is turned off automatically.

Changing Audio Output

1. Press the SPEAKERS ON/OFF BUTTON to turn the headphone speakers off and turn the Cat Ear speakers on.
2. Press the SPEAKERS ON/OFF BUTTON again to turn the headphone speakers on. The Cat Ear speakers remain on.
3. Press the SPEAKERS ON/OFF BUTTON again to turn the headphone speakers on and turn the Cat Ear speakers off.

Incoming Calls

1. To answer an incoming call on your device, press the PLAY/PAUSE/TRACK FORWARD/TRACK BACK BUTTON once.
2. To ignore an incoming call on your device, press and hold the PLAY/PAUSE/TRACK FORWARD/TRACK BACK BUTTON until a tone sounds and then release.
3. To end an active call on your device, press the PLAY/PAUSE/TRACK FORWARD/TRACK BACK BUTTON once.

Selecting Light Colors

1. Press the LIGHTS ON/OFF/CHOOSE COLOR BUTTON to turn the ear cups and speaker lights on. The default color is Blue.
2. Press the LIGHTS ON/OFF/CHOOSE COLOR BUTTON to change the ear cups and speaker lights to Green.
3. Press the LIGHTS ON/OFF/CHOOSE COLOR BUTTON to change the ear cups and speaker lights to Purple.
4. Press the LIGHTS ON/OFF/CHOOSE COLOR BUTTON to change the ear cups and speaker lights to Orange.
5. Press the LIGHTS ON/OFF/CHOOSE COLOR BUTTON to change the ear cups and speaker lights to White.
6. Press the LIGHTS ON/OFF/CHOOSE COLOR BUTTON to change the ear cups and speaker lights to Red.
7. Press the LIGHTS ON/OFF/CHOOSE COLOR BUTTON to change the ear cups and speaker lights to Yellow.
8. Press the LIGHTS ON/OFF/CHOOSE COLOR BUTTON to change the ear cups and speaker lights to Pink.
9. Press the LIGHTS ON/OFF/CHOOSE COLOR BUTTON to change the ear cups and speaker lights to Blue.
10. Press and hold the LIGHTS ON/OFF/CHOOSE COLOR BUTTON to turn the ear cups and speaker lights off.

Selecting Light Modes

1. Press the LIGHT MODE BUTTON to activate Transition mode: selected color transitions to the next color every 5 seconds.
2. Press the LIGHT MODE BUTTON to activate Beat mode: selected color beats to audio.
3. Press the LIGHT MODE BUTTON to activate Solid mode: selected color is solid.

Note: If there is no beat detected (volume is too low or audio does not have enough bass), Beat mode defaults to Solid mode.

Using the Headphone Cord

Connect your device to the headphones with the included 3.5mm to 3.5mm Headphone Cord.

1. Plug the end of the HEADPHONE CORD with two lines into the HEADPHONE CORD INPUT on the headphones.
2. Plug the end of the HEADPHONE CORD with three lines into your device.

Diagram Description: The diagram shows two ends of the headphone cord. One end has two rings (for headphones), and the other has three rings (for audio device).

Use your device to control volume through headphones.

Controls on Headphone Cord:

• Press the PLAY/PAUSE/TRACK FORWARD/TRACK BACK BUTTON once to play or pause audio.
• Press the PLAY/PAUSE/TRACK FORWARD/TRACK BACK BUTTON twice in quick succession to move one track forward.
• Press the PLAY/PAUSE/TRACK FORWARD/TRACK BACK BUTTON three times in quick succession to move one track backward.
• To answer an incoming call, press the PLAY/PAUSE/TRACK FORWARD/TRACK BACK BUTTON once.
• To ignore an incoming call, press and hold the PLAY/PAUSE/TRACK FORWARD/TRACK BACK BUTTON for 2 seconds and then release.
• To end an active call, press the PLAY/PAUSE/TRACK FORWARD/TRACK BACK BUTTON once.

Note: The HEADPHONE CORD INPUT takes precedence over the Bluetooth® connection.

If there is no audio streaming for 20 minutes, the Cat Ear Speakers are turned off automatically.

Compatibility

Bluetooth® 2.1 or above device with A2DP and AVRCP.

Care and Maintenance

Unplug and spot clean with a soft, dry cloth.

Frequently Asked Questions

Why won't audio play?

Ensure your device is within 33 feet of headphones and reconnect your device to headphones (refer to page 9 for pairing instructions). Check the headphones or your device's volume level. Charge the headphones (if using Aux in, headphones must be charged).

Why isn't the audio clear?

Ensure your device is within 33 feet of the headphones. Reconnect your device to headphones (refer to page 9 for pairing instructions). Check the headphones or your device's volume level. Adjust your device's equalizer. Charge the headphones (if using Aux in, headphones must be charged).

Why won't the lights stay on?

Charge the headphones. If the battery is depleted, it may take several minutes after plugging in the MICRO USB CHARGING CABLE for there to be enough battery life to keep the lights on.

Why can't I play/pause, change tracks or answer calls with the button on the headphone cord?

Ensure the end of the HEADPHONE CORD with two lines is plugged into the HEADPHONE CORD INPUT on the headphones. Ensure the end of the HEADPHONE CORD with three lines is plugged into your audio device.

Specifications

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Brookstone is under license. © Brookstone 2016

Warranty Information

ONE (1) YEAR LIMITED WARRANTY

Brookstone® warrants this product against defects in materials and/or workmanship under normal use for a period of ONE (1) YEAR from the date of purchase by the original purchaser ("Warranty Period"). If a defect arises and a valid claim is received within the Warranty Period, Brookstone will, at its option: 1) repair the defect at no charge, using new or refurbished replacement parts; 2) replace the product with a new product that is at least functionally equivalent to the original product; or 3) provide a store credit in the amount of the purchase price of the original product.

A replacement product or part assumes the remaining warranty of the original product. When a product or part is exchanged, any replacement item becomes your property and the replaced item becomes Brookstone's property. When a store credit is given, the original product must be returned to Brookstone and becomes Brookstone's property.

Obtaining Service

To obtain warranty service, call Brookstone Limited Warranty Service at 1-800-292-9819. Be prepared to describe the product and the problem. A purchase receipt is required. All repairs and replacements must be authorized in advance. Service options, parts availability, and response times will vary. You are responsible for delivery and the cost of delivery of the product or any parts to the authorized service center.

Limits and Exclusions

Coverage is limited to the United States of America, including U.S. Territories. This Limited Warranty applies only to products manufactured for Brookstone. It does not apply to non-Brookstone products. Manufacturers or suppliers other than Brookstone may provide their own warranties.

This warranty does not apply to: damage from failure to follow instructions; accident, abuse, misuse, fire, floods, earthquake; service by non-Brookstone representatives; accessories; modified products; items intended for periodic replacement (batteries, light bulbs); products sold "as is" (e.g., floor models); or products used commercially.

Brookstone shall not be liable for incidental or consequential damages resulting from the use of this product or breach of warranty. To the extent permitted by law, Brookstone disclaims all statutory or implied warranties, including warranties of merchantability, fitness for a particular purpose, and against hidden or latent defects. If Brookstone cannot lawfully disclaim implied warranties, they shall be limited in duration to the duration of this express warranty.

Some states disallow limitations on incidental/consequential damages or implied warranty duration, so these limitations may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

Regulatory Information

FCC and IC Note

This device complies with Part 15 of the FCC rules and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or changes to this equipment. Such modifications or changes could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC's RF exposure guidelines, this equipment should be installed and operated with a minimum distance of 5mm between the radiator and your body.

Conformité Industrie Canada

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.