User Guide for thermotec models including: 2024 Nu Wave Base, 2024, Nu Wave Base, Wave Base, Base
il y a 1 jour — For your health and safety please ensure that you are wearing the appropriate safety equipment including protective goggles and gloves when installing.
NuWave(TM) Base DIY Quick Guide Simple steps and recommendations for the installation of Thermotec NuWave(TM) Base acoustic barrier. For your health and safety please ensure that you are wearing the appropriate safety equipment including protective goggles and gloves when installing. STEP 1 Measure distance from the floor to ceiling STEP 2 Cut NuWave(TM) Base to size using a straight blade cutting tool with a t-square to ensure it is straight. STEP 2: Place the first length of NuWave(TM) Base butted up STEP 3 against the ceiling and allow to drape evenly to the floor. Screw, nail or staple into place. Use your cutting tool to carefully cut around outlet STEP 4 boxes as they become covered. Make these as close and as tight as possible to maintain a good seal. STEP 5 Install your plasterboard over the NuWave(TM) Base and caulk the seams with an acoustic sealant to achieve the best results before finishing and painting your walls.macOS Version 13.5.2 (Build 22G91) Quartz PDFContext Keynote