User Manual for Transcend models including: 35T3, 35T3 StoreJet External Storage, StoreJet External Storage, External Storage, Storage
evon su
User's Manual
StoreJet 35T3 - User's Manual
15 апр. 2025 г. — If not, refer to the user's manual of your computer (or motherboard) to enable it. Page 8. 8. 5. For StoreJet 35T3, ensure the power adapter cable is ...
15 apr 2025 — Please check the following: 1. Is your StoreJet properly connected to the USB port? If not, unplug it and plug it in again after. 10 seconds. If it is properly ...
User's Manual
External Storage
StoreJet 35T3
2025/04 (v3.2)
1
Table of Contents
1. Package Contents.............................................................................. 3 2. System Requirements ....................................................................... 3 3. Product Overview .............................................................................. 3 4. Getting Started ................................................................................... 4
4-1 Operation..........................................................................................................................................4 4-2 Using the StoreJet with Windows..............................................................................................4 4-3 Using the StoreJet with macOS .................................................................................................4
5. Safety Precautions............................................................................. 5 6. Specifications..................................................................................... 6 7. Frequently Asked Questions ............................................................ 7 8. EU Compliance Statement ................................................................ 8 9. Recycling and Environmental Protection........................................ 8 10. Warranty Policy.................................................................................. 8 11. GNU General Public License (GPL) Disclosure .............................. 8 12. End-User License Agreement (EULA) ............................................. 8 13. Federal Communications Commission (FCC) Statement .............. 9 14. Eurasian Conformity Mark (EAC) ..................................................... 9
2
1. Package Contents
StoreJet 35T3 desktop hard drive USB 3.1 Gen1 USB Type Micro-B to
USB Type-A cable Global AC adapter (US/EU/UK plug
varies with model type) Quick Start Guide
2. System Requirements
The following requirements must be met to run StoreJet on your computer: Desktop or notebook computer with a working USB port. Windows 7/8/8.1/10 macOS 10.7 or later
Transcend EliteTM and RecoveRxTM are compatible with the following operating systems: Windows 7/8/8.1/10 macOS 10.10 or later (Transcend Elite)/ macOS 10.12 or later (RecoveRx)
3. Product Overview
1
2
3
4
1 LED Indicator 2 Function Button 3 USB Port 4 DC12V Input
3
4. Getting Started
4-1 Operation
LED Indicator
State
Solid Flashing Off
Function Button
One touch Backup Re-connect to PC
Description
Idle Operating Sleep Mode or safely removed Carry out one-touch backup with Transcend Elite software Re-connect to PC after safely removed
4-2 Using the StoreJet with Windows
Connecting a StoreJet to a Computer 1. Power on your computer. 2. Connect the drive's USB cable to your computer's USB port. 3. Connect the DC Power Adapter cable to the square DC socket on the back of the device.
Connect the other end of the adapter to an AC power socket. 4. Check if the drive shows up in Disk Management in your Windows. 5. You can now use the StoreJet as an external hard drive and transfer data.
Disconnecting a StoreJet from Windows 1. Select the Safely Remove Hardware and Eject Media icon on the system tray in Windows. 2. Eject StoreJet drive. 3. A message will pop up: "The `USB Mass Storage Device' device can now be safely
removed from the system." Then unplug the StoreJet. WARNING To prevent data loss, always use this procedure to remove the StoreJet. NEVER disconnect the StoreJet from a computer when the device's LED is flashing.
4-3 Using the StoreJet with macOS
Reformatting the StoreJet To use the StoreJet on a macOS Time Machine, reformat the drive to a HFS+ partition first. Please refer to FAQ-701 on our website: https://www.transcend-info.com/Support/FAQ-701 If you intend to regularly use the drive with both Windows and macOS, we recommend formatting the drive to the exFAT file system. Formatting the drive will delete all existing data on the drive.
4
5. Safety Precautions
General Use Unpack the device package with care. Avoid exposing your StoreJet to extreme temperatures above 45°C (113°F), or below 5°C (41°F). Do not drop your StoreJet. Keep your StoreJet away from water or any other liquids. Do not wipe or clean the exterior case with a damp/wet cloth. Do not store your StoreJet in any of the following environments: - Direct sunlight. - Next to an air conditioner, electric heater or other heat sources. - In a car that is exposed in direct sunlight. - In an area with strong magnetic fields or near magnetic objects.
Backing Up Data Transcend does NOT take any responsibility for data loss or damage during operation. If you intend to store data on your StoreJet, we strongly advise that you regularly back up the data to a computer or other storage devices. If your computer is not booted while StoreJet 35T3 is connected, please disconnect the StoreJet first and re-connect it after the computer reboots. Or you can refer to the computer's manual and change the BIOS settings to instruct the computer to boot from a different device.
Transporting Avoid squeezing or pressing the StoreJet. Do not place objects on top of your StoreJet.
Power Do not use a USB hub to connect the StoreJet drive with your computer. The USB hub may not be able to provide sufficient power for the drive. Use only the USB cable that comes with the StoreJet. Ensure the cable you are using is in good condition. NEVER use a cable that is frayed or damaged. The StoreJet 35T3 should be powered from your home's power outlet via the power adapter included in the package. Do not connect the StoreJet 35T3 to any other power adapter. Do not place objects on the USB cable. Make sure the cable is not located where it can be tripped over or stepped on.
5
6. Specifications
StoreJet 35T3
Dimensions
172.4 mm (L) x 152.4 mm (W) x 44.8 mm (H) 6.79" (L) x 6.00" (W) x 1.76" (H)
Weight 1040 g (36.68 oz)
USB Type USB Type Micro-B to USB Type A
Connection Interface USB 3.1 Gen 1 (USB 5Gbps)
Capacity 4 TB / 8 TB
Storage Media 3.5" HDD
Operating Temperature 5°C (41°F) ~ 45°C (113°F)
Operating Voltage
AC input: 100V ~ 240V DC input: 12V / 2A (via switching power adapter)
Certificate CE / UKCA / FCC / BSMI / KC / EAC / RCM
Warranty Three-year Limited Warranty
6
7. Frequently Asked Questions
If a problem occurs, please first check the frequently asked questions listed below before taking your StoreJet for repair. If your problems still cannot be solved, please consult your dealer, service center, or local Transcend branch office. You can also visit Transcend website for FAQ and Technical Support services at https://www.transcend-info.com/Support/service.
I installed an OS onto the StoreJet. Why can't I boot from it? StoreJet is mainly served as a removable storage device. If you would like to boot the computer from StoreJet, please make sure your computer supports the USB boot function, and your StoreJet can be detected upon booting. Also, please make sure that the software installed supports USB boot function. If the StoreJet cannot be detected upon booting, your computer does not support booting from StoreJet.
What should I do if the transfer speed of my StoreJet is too slow? 1. Please use Transcend's RecoveRx software to completely re-format your drives (Windows
version only). Visit the link for more detail: https://www.transcend-info.com/Support/Software-4/
WARNING
This function will delete all the data stored in your StoreJet. Please back up your data first
before formatting.
2. You can check if any bad block is in your HDD by utilizing the monitoring tool (e.g. HD Tune) or running the "CHKDSK" command. For more information about "CHKDSK" command, please visit https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/chkdsk?t abs=event-viewer
I cannot copy large files to the StoreJet. Please check the following: 1. Is there enough storage capacity? 2. Is the file larger than 4GB? If so, please check if the StoreJet's file system is FAT32, which can
be supported by most computers, game consoles and media playback devices. However, the FAT32 file system does not support large files that exceed 4GB. If you plan to store files that are larger than 4GB, you need to reformat the drive to a different file system such as NTFS or exFAT.
Why is it that my hard disk can only be allocated to 2TB, and the remaining capacity is displayed as "Unallocated"? Please delete the allocated partition and convert the MBR disk to a GPT disk to solve this problem. The steps are as follows: https://www.transcend-info.com/Support/FAQ-1145
My operating system cannot detect the StoreJet. Please check the following: 1. Is your StoreJet properly connected to the USB port? If not, unplug it and plug it in again after
10 seconds. If it is properly connected, try another available USB port. 2. Are you using the USB cable that came in the StoreJet package? If not, try using Transcend's
USB cable to connect the StoreJet to your computer. 3. Is your StoreJet connected to a Mac keyboard? If so, plug it into an available USB port on your
Mac computer. 4. Is the USB port enabled? If not, refer to the user's manual of your computer (or motherboard) to
enable it.
7
5. For StoreJet 35T3, ensure the power adapter cable is securely connected to the DC IN socket, and that the power adapter is also plugged into a working AC power outlet.
6. Avoid connecting the StoreJet through a USB hub.
I have already shut down all the applications on my computer, but an error message still pops up saying "This device is currently in use. Close any programs or windows that might be using the device and then try again." If you are having trouble pinpointing the exact application that is preventing you from safely ejecting your StoreJet device, please shut down the computer entirely, and then remove the StoreJet.
8. EU Compliance Statement
Transcend Information hereby declares that all CE marked Transcend products incorporating radio equipment functionality are in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.transcend-info.com/eu_compliance
9. Recycling and Environmental Protection
For more information on recycling the product (WEEE) and battery disposal, please refer to the following link: https://www.transcend-info.com/about/green
10. Warranty Policy
Please find the warranty period of this product on its package. For details of Warranty Terms and Conditions and Warranty Periods, please refer to the link below: https://www.transcend-info.com/warranty
11. GNU General Public License (GPL) Disclosure
For more information on open-source licensing, please refer to the link below: https://www.transcend-info.com/Legal/?no=10
12. End-User License Agreement (EULA)
For details of software license terms, please refer to the following link: https://www.transcend-info.com/legal/gpl-disclosure-eula
8
13. Federal Communications Commission (FCC) Statement
This device complies with Part 15 FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received including interference that may cause undesired operation. This Equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help.
14. Eurasian Conformity Mark (EAC)
9
chkdsk | Microsoft Learn
Green Initiatives - Transcend Information, Inc.