GameSir T4 Wireless Controller User Manual
Precautions
NOTICE: Please read this Precautions carefully before using the product.
- CONTAINS SMALL PARTS. Keep out of reach of children under the age of 3. Seek immediate medical attention if swallowed or inhaled.
- DO NOT use the product near fire.
- DO NOT expose to direct sunlight or high temperatures.
- DO NOT leave the product in a humid or dusty environment.
- DO NOT impact the product or cause it to fall due to strong impact.
- DO NOT touch USB port directly or it might cause malfunctions.
- DO NOT strongly bend or pull cable parts.
- Use a soft, dry cloth while cleaning.
- DO NOT use chemicals such as gasoline or thinner.
- DO NOT disassemble, repair or modify.
- DO NOT use for purposes other than its original purpose. We are NOT responsible for accidents or damage when used for non-original purposes.
- DO NOT look directly at the optical light. It might damage your eyes.
- If you have any quality concerns or suggestions, please contact GameSir or your local distributor.
Contact Information
We hope this manual answered any questions you may have. If you have any further questions, please contact us:
GameSir Facebook: https://www.facebook.com/myGamesir
Twitter: https://twitter.com/mygamesir
Customer Service: cs@gamesir.hk
Product Description
The GameSir T4 wireless controller is designed for an enhanced gaming experience. It is compatible with Windows 7 and later operating systems via wired connection and 2.4 GHz low-delay wireless transmission. The GameSir T4 features LB & RB buttons, a D-pad, a silicone anti-skid 3D joystick, and sensitive triggers. Key configurations of the M1-M4 buttons on the backside are customizable and can be freely combined. Dual motors provide strong vibration feedback. The ergonomic handles are unevenly engraved and designed for an anti-skid grip. The product has a translucent design with LED ABXY buttons on the right.
Package Contents
- GameSir T4 Wireless Controller
- 2.4 GHz Wireless Receiver
- Type-C charging cable
- Instruction Manual
System Requirements
- Windows 7/8/10
Registration
Register your GameSir ID at https://gamesir.hk/ to receive real-time information on your product's warranty status and access GameSir exclusive benefits.
What You'll Get
- 12 months limited manufacturer's warranty
- Free online technical support at https://gamesir.hk/ (Supports English and Japanese)
Device Layout
The GameSir T4 Wireless Controller features a comprehensive layout for gaming. Key components include:
Front View:
- A: BACK Button
- B: START Button
- C: TURBO Button
- D: HOME Button
- E: A/B/X/Y buttons
- F: D-Pad (Directional Pad)
- G: LED light indicators
- H: Backlight loop
Back View:
- I: Configurable buttons (M1/M2/M3/M4)
- J: Reset Button
Bottom/Side View:
- K: LT Button
- L: LB Button
- M: Charging light indicator
- N: Type-C connector
- O: RT Button
- P: RB Button
- Q: 2.4GHz Dongle
- R: USB Cable
Connection
Connect to PC via 2.4 GHz receiver (Xinput Mode)
- Click the Home button to turn on the GameSir T4 Wireless Controller. The LED indicator lights will scroll up and down, indicating the controller is ready to connect.
- Plug the 2.4 GHz receiver into your PC's USB port.
- When the 2.4 GHz receiver indicator lights up and LED1+LED4 of the GameSir T4 Wireless Controller stay on, Xinput Mode is connected successfully. The controller can now be used normally.
Note: Hold the Home button for 5 seconds to switch between Xinput Mode and Dinput Mode.
- Xinput Mode: LED1+LED4 indicators stay on.
- Dinput Mode: LED1+LED3 indicators stay on.
Connect to PC via Type-C charging cable (Xinput Mode)
- Connect the GameSir T4 Wireless Controller to your PC's USB port using the Type-C charging cable.
- When LED1+LED4 of the GameSir T4 Wireless Controller stay on, Xinput Mode is connected successfully.
- The corresponding driver will be automatically installed on your PC. The controller can now be used normally.
Note: Hold the Home button for 5 seconds to switch between Xinput Mode and Dinput Mode.
- Xinput Mode: LED1+LED4 indicators stay on.
- Dinput Mode: LED1+LED3 indicators stay on.
Input Mode Indicators:
- Dinput Mode: LED1 and LED3 indicators are lit.
- Xinput Mode: LED1 and LED4 indicators are lit.
Configurable M Buttons
The M1, M2, M3, and M4 buttons on the back of the controller can be customized.
Default Key Layout:
- M1 button is typically mapped to B.
- M2 button is typically mapped to A.
- M3 button is typically mapped to Y.
- M4 button is typically mapped to X.
To set up a combination:
- Hold M1 (or M2, M3, M4) and then press START or BACK. The backlight loop will turn red and blue simultaneously, entering setup mode.
- Press the keys you wish to combine in sequence.
- Press M1 (or M2, M3, M4) again. The red backlight loop will turn off, indicating the combination is successfully set.
The following buttons can be set up as combination buttons: A, B, X, Y, L1, L2, L3, R1, R2, R3. These can be combined freely, either as single buttons or sequences.
M2, M3, M4 have the same setup procedure as M1. This function can only be set up when the controller is successfully connected.
Turbo Function
To enable Turbo function: Press the desired button, then simultaneously press the TURBO key. The backlight will turn red, indicating Turbo function is set.
To disable Turbo function: Press the button with Turbo function enabled, then simultaneously press the TURBO key. The backlight will turn red, indicating Turbo function is canceled.
Buttons that can be used for Turbo function: A, B, X, Y, LB, RB, LT, RT.
Automatic Power Off
When the GameSir T4 Wireless Controller is connected and idle, it will automatically power off within 180 seconds (3 minutes).
When the controller is disconnected and idle, it will automatically power off within 30 seconds.
Charging
It takes 1.5 to 2 hours to fully charge the GameSir T4 Wireless Controller.
The charging indicator light remains steady red during charging.
When fully charged, the charging indicator light turns off. Please unplug the Type-C charging cable.
Lighting Adjustment and Motor Vibration Intensity Adjustment
Lighting Adjustment:
Hold LT, RT, and R3 simultaneously, then press the Up or Down buttons on the D-pad to adjust lighting brightness. There are 5 levels of lighting, with the lowest level turning the lights off.
ABXY Backlight Adjustment:
Hold LB + RB for 5 seconds to switch the ABXY button backlights on or off.
Motor Vibration Intensity Adjustment:
Hold the Turbo button, then press the Up or Down buttons on the D-pad to adjust vibration intensity. There are 5 levels of vibration, with the lowest level being vibration off.
Low Battery Alert
The GameSir T4 Wireless Controller indicates low power (less than 10%) when:
- Battery voltage is less than 3.5V.
- The LED indicator lights flash.
- Vibration is off.
Reset
To reset the GameSir T4 Wireless Controller, insert a slender pin into the Reset button located on the back of the controller. The controller will turn off and then reboot.
