Pioneer System Firmware Update Instructions
This firmware update applies only to the following models of Pioneer In-Dash AV Receivers sold in Australia & New Zealand.
Compatible Models
| Model Name |
|---|
| AVH-Z9150BT |
| AVIC-Z910DAB |
| AVIC-Z710DAB |
| AVH-Z9200DAB |
| AVIC-Z920DAB |
| AVIC-Z720DAB |
| AVIC-Z930DAB |
| AVIC-Z730DAB |
IMPORTANT
Please download and print these firmware update instructions before downloading and installing the firmware update. It is important that you complete all steps correctly and, in the order described below.
For any questions, please contact the Pioneer Technical Support team via their website at https://www.pioneer.com.au/contact-us/, Monday through Friday, 9:00 AM - 4:30 PM (excluding holidays).
Items Needed for Update:
- Pioneer In-Dash Navigation AV Receiver or Multimedia DVD receiver listed above.
- Blank SD memory card or USB storage device (2 GB or larger capacity), formatted to FAT32. Ensure it does not contain any files.
CAUTION
- DO NOT turn your unit off, eject the SD memory card, or disconnect the USB storage device while the firmware is being updated.
- You can only update the firmware when the vehicle is stopped, and the parking brake is engaged.
IMPORTANT (For navigation system users)
- When this firmware update is installed, all navigation function settings will be reset, and saved data will no longer be available. You will need to reconfigure the settings after the update.
- Any content purchased and added through Naviextras will also need to be re-installed. Note that no charges will be incurred to download previously purchased content.
Checking the Firmware Version on Your Unit
Check whether your unit's firmware needs to be updated by verifying the version number.
Procedure:
- Press the HOME button to display the Top menu screen.
- Touch the following keys in the following order: [Settings icon] ⚙️ → [Tools icon] ?️.
- The "System" screen appears. Scroll down the list.
- Touch [System Information].
- Touch [Firmware Information].
- After the "Firmware Information" screen appears, check the firmware version number.
Downloading the Firmware Update Files from Pioneer's Website
- Download the firmware update files by clicking on the following link and finding your product: https://www.pioneer.com.au/firmwaresoftware/
| Model Name | Update is necessary when | File Name | Version |
|---|---|---|---|
| AVH-Z9150BT | Current version is Lower than 1.08 | 18MY_FW-Update_v1_080100_AVH.zip | 1.08 |
| AVIC-Z910DAB | Current version is Lower than 1.06 | 18MY_FW-Update_v1_06_AVIC.zip | 1.06 |
| AVIC-Z710DAB | Current version is Lower than 1.06 | 18MY_FW-Update_v1_06_AVIC.zip | 1.06 |
| AVH-Z9200DAB | Current version is Lower than 1.07 | 19MY_FW-Update_v1_070100_AVH.zip | 1.07 |
| AVIC-Z920DAB | Current version is Lower than 1.07 | 19MY_FW-Update_v1_070100_AVIC.zip | 1.07 |
| AVIC-Z720DAB | Current version is Lower than 1.07 | 19MY_FW-Update_v1_070100_AVIC.zip | 1.07 |
| AVIC-Z930DAB | Current version is Lower than 1.06 | 20MY_FW-Update_v1_060100_AVIC.zip | 1.06 |
| AVIC-Z730DAB | Current version is Lower than 1.06 | 20MY_FW-Update_v1_060100_AVIC.zip | 1.06 |
- Extract the downloaded zip file. The downloaded zip file will produce the following folder when decompressed:
| File name before decompression | after decompression |
|---|---|
| 18MY_FW-Update_v1_080100_AVH.zip | AVH18 |
| 18MY_FW-Update_v1_06_AVIC.zip | AVIC18 |
| 19MY_FW-Update_v1_070100_AVH.zip | AVH19 |
| 19MY_FW-Update_v1_070100_AVIC.zip | AVIC19 |
| 20MY_FW-Update_v1_060100_AVIC.zip | AVIC20 |
Updating the Firmware on Your Unit
IMPORTANT
- DO NOT perform this firmware update if the model number of your Pioneer product is anything other than one of the above models.
- Ensure that the update file is located within the root (top) folder of your SD memory card or USB storage device. There should be no other files on the SD memory card or USB storage device.
- While your unit is being updated, DO NOT turn off the system's power and DO NOT touch the unit's touchscreen as this may result in severe damage to your unit.
- DO NOT remove the SD memory card or USB storage device during the firmware update process.
- Performing the firmware update will restore all settings to their default values.
- Disconnect any external mobile devices that are currently connected to your unit before starting the update.
Procedure:
- Connect a blank (formatted) SD memory card or USB storage device to your computer, then locate the correct update file and copy it onto the SD memory card or USB storage device.
- Insert an SD memory card into the SD card slot or connect the USB storage device to the USB port.
- Turn the source off on your unit.
- Press the HOME button to display the Top menu screen.
- Touch the following keys in the following order: [Settings icon] ⚙️ → [Tools icon] ?️.
- The "System" screen appears. Scroll down the list.
- Touch [System Information].
- Touch [Firmware Update]. The "Firmware Update" screen appears.
- Touch [Continue] to display the data transfer mode.
- Wait for file check to complete.
- Touch [Start]. A WARNING will be displayed regarding potential product damage. Read the following carefully:
- DO NOT DISCONNECT USB DURING UPDATE
- DO NOT DRIVE THE CAR DURING UPDATE
- DO NOT TURN OFF THE ENGINE DURING UPDATE
- DO NOT RESET THE PRODUCT DURING UPDATE
- Wait until the update process is complete. The unit will display the "Update Complete" screen (Version: x.XX → x.xx). Press "HOME" to reset the product.
- Press the HOME button.
- Remove the SD memory card or USB storage device.
- The firmware update is complete.
Verify that the Firmware Has Been Updated
Please refer to "Checking the firmware version" to verify that the firmware has been updated.
If you have any difficulty performing these instructions, please contact the Pioneer Technical Support team via their website at https://www.pioneer.com.au/contact-us/, Monday through Friday, 9:00 AM – 4:30 PM (excluding holidays).
