Electrolux ECC9310S UltimateTaste 500 90cm Chimney Extractor Hood
User Manual
Introduction
Welcome to your new Electrolux UltimateTaste 500 chimney extractor hood, model ECC9310S. This manual provides essential information to ensure safe installation, proper operation, and effective maintenance of your appliance. Please read it carefully before use.
Important Safety Information
Your safety and the safety of others are very important. Always read and observe all safety messages:
- This appliance is intended for domestic use only.
- Ensure the voltage on the rating plate corresponds to the mains voltage before connecting.
- Do not operate the appliance if the cord or plug is damaged.
- Keep packaging materials away from children.
- Always disconnect the appliance from the power supply before cleaning or maintenance.
- Ensure proper ventilation in the room where the hood is installed.
- Do not use the hood for purposes other than its intended use.
- Warning: Risk of electric shock. Do not touch internal components.
- Warning: Risk of fire. Ensure grease filters are cleaned regularly.
Product Description
The Electrolux ECC9310S is a 90cm chimney extractor hood designed to efficiently remove cooking fumes and odors from your kitchen. It features multiple fan speeds, integrated lighting, and easy-to-clean filters.
- Model: ECC9310S
- Type: Chimney Extractor Hood
- Width: 90cm
- Series: UltimateTaste 500
- Features: Variable fan speeds, LED lighting, washable grease filters.
Installation
Proper installation is crucial for the performance and safety of your extractor hood. Refer to the detailed installation guide provided separately or follow these general steps:
- Mounting Location: Select a suitable location on the wall above your hob, ensuring adequate clearance as per local building codes and the appliance specifications.
- Diagram: Mounting Points: A typical installation diagram would show the hood being mounted to the wall using appropriate brackets and screws. It would indicate the correct height above the cooking surface (e.g., 65-75 cm for electric hobs, 75-85 cm for gas hobs) and the required clearance from surrounding cabinets.
- Ducting: Connect the hood to an external exhaust duct or recirculate the air using charcoal filters (sold separately). Ensure the ducting is properly sealed and routed.
- Electrical Connection: Connect the appliance to a properly grounded electrical outlet. If hardwiring is required, ensure it is done by a qualified electrician.
- Diagram: Electrical & Ducting Connections: This diagram would illustrate the routing of the exhaust duct and the connection of the power cable to the mains supply, emphasizing safety grounding.
Note: For detailed dimensions and specific installation requirements, consult the technical drawings provided with the product.
Operation
Operating your Electrolux extractor hood is straightforward:
- Control Panel: The control panel is typically located on the front or underside of the hood.
- Diagram: Control Panel Layout: An illustration of the control panel would show buttons for:
- Fan Speed: Select low, medium, or high speed depending on the intensity of cooking fumes.
- Light: Turn the integrated LED lights on or off to illuminate the cooking surface.
- Timer/Boost (if applicable): Activate a timer function or a temporary high-speed boost.
- Using the Hood: Turn on the hood before cooking begins and let it run for a few minutes after cooking is finished to clear residual fumes and odors.
Maintenance and Cleaning
Regular cleaning and maintenance will ensure your hood operates efficiently and prolong its lifespan.
- Grease Filters: The metal grease filters should be removed and washed regularly (e.g., monthly, depending on usage). They can typically be washed by hand in warm, soapy water or in a dishwasher.
- Diagram: Filter Removal: This diagram would show how to release and remove the grease filters, usually by pressing a latch or sliding them out.
- Exterior Surfaces: Clean the exterior surfaces of the hood with a damp cloth and mild detergent. Avoid abrasive cleaners.
- Interior Surfaces: Wipe the interior surfaces with a damp cloth.
- Charcoal Filters (Recirculation Mode): If your hood is used in recirculation mode, the charcoal filters need to be replaced periodically (e.g., every 3-6 months) as they cannot be washed.
- Diagram: Charcoal Filter Replacement: This would illustrate how to access and replace the charcoal filters, which are usually located behind the grease filters.
Troubleshooting
If you encounter an issue with your extractor hood, consult the following common problems and solutions:
- Problem: Hood not operating.
- Possible Cause: No power supply.
- Solution: Check if the appliance is plugged in and the circuit breaker is on.
- Problem: Reduced extraction power.
- Possible Cause: Grease filters are clogged or charcoal filters need replacement.
- Solution: Clean or replace the filters as per the maintenance section.
- Problem: Lights not working.
- Possible Cause: Bulb is faulty or not fitted correctly.
- Solution: Check bulb connection or replace the bulb.
If the problem persists after trying these solutions, contact Electrolux customer service.
Customer Service and Warranty
For service, support, or warranty information, please refer to the contact details provided by Electrolux in your region. Keep your proof of purchase and the appliance's serial number handy.
Contact: Electrolux Customer Service
