Electrolux ERCI927SA Range Hood

Contents

This document contains the following sections:

• 1. Product Description
• 2. Notes
• 3. Packing List
• 4. Technical Specifications
• 5. Circuit Schematic Diagram
• 6. Installation Instructions
• 7. Usage Instructions
• 8. Maintenance
• 9. Troubleshooting
• 10. Part Name Diagram
• 11. Customer Care Center

Customer Care and Service Symbols:

• ⚠️ Warning! Important information relating to protection of personal safety and avoidance of electrical damage.
• ℹ️ General information and advice
• ♻️ Environmental protection information

1. Product Description

The European range hood offers six key advantages:

1. Futuristic design, up-to-date styling: Streamlined, elegant, and stylish appearance with touch control, enhancing the cooking experience.
2. Large suction and complete removal of fume: The integral stretched hood is designed for efficient fume collection in kitchens, with a high exhaust air rate fan for thorough fume removal.
3. Low noise: The well-designed exhaust system ensures smooth and quiet operation based on aerodynamic principles.
4. Easy maintenance: Large conical filters on four sides ensure thorough fume suction, prevent oil spillage into the oil cup, and simplify maintenance compared to traditional models.
5. Circuit characteristics: A unique multi-circuit design prevents accumulation, dripping, or seepage.

2. Notes

(1) Child Safety

⚠️ 1. Do not allow children to extend fingers or body parts into the range hood. Warning: Destroy or recycle the appliance's carton, plastic bags, and any other exterior wrapping material immediately after unpacking. Children should never play with these items. Danger of suffocation!

(2) Precautions for Use

• ⚠️ 1. Always use a power supply compliant with the appliance's requirements. A three-pin power socket must be reliably grounded.
• ⚠️ 2. Do not change electrical parts specifications, internal circuits, or connect other lines.
• ⚠️ 3. Do not place electrical parts like motors and switches in water under any circumstances.
• 4. Do not scratch, knot, or squeeze the power cable.
• 5. The wall for installation must be strong enough to bear the range hood's weight and must be non-combustible.
• ⚠️ 6. The air from the range hood should not be discharged into a flue used for burning gas or other fuels.
• 7. Never leave high naked flames under the range hood.
• ⚠️ 8. If abnormal conditions occur, refer to the troubleshooting section. If the fault persists, unplug the power plug and contact the customer service centre.
• ℹ️ 9. Do not dismantle or repair the appliance without authorization, as serious consequences may follow.
• ℹ️ 10. This appliance is for household use only and not for unintended purposes.
• ℹ️ 11. When the oil cup is two-thirds full, clean it immediately to prevent spillage.
• ℹ️ 12. If the light is damaged, replace it with a new one of the same specifications.
• ℹ️ 13. Failure to clean the range hood as instructed may pose a fire risk.
• ℹ️ 14. When used with gas or fuel-burning stoves, the room must be well-ventilated.

(3) Environmental Protection

Electrolux's environmental management philosophy is: "Environmental protection, benefit of mankind, pollution prevention, and continuous improvement." The environmental impact of our products is as follows:

• ✅ 1. Waste cartons and plastic bags are recyclable; waste foam is not. Please classify wastes properly after unpacking.
• ✅ 2. Every product has a service life. Please scrap the product once it reaches its service life according to national regulations. Whether scrapped due to expiration or replacement, the product should be sent to a local recycling station for professional classification and recycling.

3. Packing List

Check the contents against the packing list. Contact the vendor if anything is missing or damaged.

4. Technical Specifications

5. Circuit Schematic Diagram

The circuit schematic diagram shows the electrical connections for the Electrolux ERCI927SA range hood. It illustrates the flow from a 220V-50Hz power supply. Control switches connect to a power board. Wires are color-coded: Brown and Blue for N and L respectively, Yellow and Green for ground. The diagram shows connections for LED lights (1.5W x4), a Motor, and an 8µF capacitor. Wire colors are specified for each component connection.

6. Installation Instructions

I. Installation Requirements

1. The installed ceiling must be able to bear the weight of the entire case.
2. To prevent electric shock hazards, the range hood should not be in contact with electrical circuits inside or outside of the ceiling and walls.
3. The range hood should not be installed in a place with large convection, as this will degrade suction performance.
4. The range hood should be firmly installed on a ceiling at least 650 mm above the cooking vessels. Lower heights improve smoke suction performance.
5. The distance between the air outlet of the range hood and the upper exhaust hole should be ≤1.5 m to avoid affecting smoke exhaust performance caused by long air outlets or excessive turns (typically one turn is recommended).
6. Refer to Figure 1 for the installation dimensions of the air outlet through a cabinet or ceiling.

II. Installation Method

1. The reference distance between the bottom of the range hood and the supporting surface of the cooking vessels is 650 mm-800 mm. The space should be no less than 650 mm.
2. As shown in the installation diagram, drill 8 holes of 7 mm in length according to the spacing shown. Insert 8 expansion pipes, then fasten the ceiling flange on the top of the cement ceiling.
3. As shown in the figure below, place the air outlet cover on the air outlet pipe, insert the air outlet pipe port into the air outlet pipe at a depth of around 30 mm, then use aluminum foil tape to fasten and seal the two together. Finally, insert the clasp of the air outlet cover into the mount of the air outlet base.

Diagram Description: Shows the connection of the air outlet pipe to the air outlet cover and air outlet base using aluminum foil tape. Components labeled: Air outlet pipe, Air outlet cover, Air outlet pipe port, Aluminum foil tape, Air outlet base.

4. Place the other end of the air outlet pipe outside the room. Ensure the pipe wall is not bulged or deflated, bends freely, is tightly inserted, and the check valve blade is unobstructed.
5. Pull out the internal decorative cover and fasten it onto the ceiling baffle with the 4 special screws (accessories).
6. Insert the oil cup evenly into the hook on the bottom of the grill and push it evenly into place.
7. Plug the power plug of the appliance into a reliably grounded power socket, then try running the machine to ensure all functions are working normally.

Note: The diameter of the exhaust wall hole should be similar to that of the air outlet pipe and should not be too small. Otherwise, it will lead to poor smoke exhaust, increased noise, and reduced air volume.

III. Installation Reference Diagram

Opening size of the top surface of the air outlet pipe (bottom view):

Diagram Description: Shows a rectangular opening with dimensions 320mm and 230mm, with a circular outlet in the center. Labeled with dimensions 640, 250, 320, 230, and 8-47.

Figure 1

Installation Diagram: Air Outlet Pipe Through Cabinet (Left)

Diagram Description: Illustrates the range hood mounted above a wall. Shows the air outlet pipe extending upwards through a cabinet. Key dimensions provided: Hood width 640mm, height from cooking surface 650-800mm, air outlet pipe diameter 340mm. Components labeled: Air outlet pipe adapter, Air outlet pipe.

Installation Diagram: Air Outlet Pipe Through Cabinet (Right)

Diagram Description: Illustrates the range hood mounted above kitchen cabinets. Shows the hood unit, air outlet pipe, and cabinet opening. Key dimensions provided: Hood width 1200mm, depth 640mm, adjustable height from cooking surface 900-1220mm, cabinet opening dimensions 410mm width and 408mm depth. Components labeled: Air outlet pipe adapter, Air outlet pipe.

IV. Installation Steps

1. Ceiling flange installation: The flange is fixed inside the cement ceiling.
   Diagram Description: Shows the ceiling flange and its placement within a ceiling structure, with dimensions Left/Right 320 and Front/Rear 230.
2. Ceiling flange fixed with ceiling assembly:
   Diagram Description: Illustrates the ceiling flange being attached to the ceiling assembly using triangular self-tapping screws and ceiling installation brackets (x4).
3. Install the case bracket:
   Diagram Description: Shows the case installation bracket (x4) and triangular self-tapping screws being used to attach the case assembly to the hood assembly.
4. Install the internal and external decorative covers:
   Diagram Description: Shows the internal and external decorative covers being slid into place, with an arrow indicating the installation direction.
5. Case bracket: Fixed with ceiling bracket:
   Diagram Description: Shows the case bracket being secured to the ceiling bracket using hexagon screws.
6. Fixed with internal decorative cover:
   Diagram Description: Shows the internal decorative cover being attached using stainless steel slotted pan head screws, with an arrow indicating the installation direction.

V. Installation Checklist

The user should first check whether the range hoop is well installed.

VI. Power Configuration

After checking that the appliance is properly installed, plug the power plug into a reliably grounded power socket.

7. Usage Instructions

1. Switch/Function Buttons Usage

Diagram Description: Shows the control panel with icons for: Delayed shutdown switch, Fan switch, Power boost, Lighting switch, Cleaning Reminder, and Power supply. Also shows the dimensions of the range hood unit: 1200mm width, 640mm depth, 98mm height, 582mm height, 540mm height, 340mm height, 410mm width, 640mm width.

1. Power On: When powered on, the appliance performs a self-check. Button indicators light up sequentially from left to right, then all turn off. Buttons are inactive during this process.
2. Power Button: Press the "⌂" button to turn the appliance on when it is off. The fan function activates at this time.
3. Lighting Function: Controlled independently.
   
   • Lighting On: When the appliance is off, press "💡" to activate lighting. It defaults to the 2nd gear on first use after power-on, and uses the last gear subsequently. Press the gear buttons (left to right: 1st, 2nd, 3rd) to set lighting brightness.
     Lighting Type: 1st Gear (low brightness), 2nd Gear (medium brightness), 3rd Gear (high brightness).
   • Lighting Off: When lighting is on, press "💡" to turn it off. After a 5-minute delayed shutdown, lighting turns off with the fan.
4. Fan Function: Usable only when the machine is on.
   
   • Fan On: When the machine is on, press "☁" to start the fan. It defaults to 2nd gear on first use after power-on, and uses the last gear subsequently. Press the gear buttons (left to right: 1st, 2nd, 3rd) to set fan speed.
     Fan Speed: 1st Gear (low speed), 2nd Gear (medium speed), 3rd Gear (high speed).
   • Fan Off: When the fan is active (including power boost), press "☁" to turn off the fan. Press "⌂" to turn off the fan and machine (lighting is unaffected). The fan turns off automatically after a 5-minute delayed shutdown.
5. Power Boost:
   
   • Power Boost On: When the fan is active, press "🔥" to run the fan at power boost speed for 1 minute. The power boost indicator lights up with a breathing effect.
   • Power Boost Off: After 1 minute, the fan reverts to the highest gear. Power boost does not run if the fan is off or on other gears.
6. Delayed Shutdown: Works only when the fan is running.
   
   • Delayed Shutdown On: When the fan is running, press "🕰" to shut the fan down after a 5-minute delay. The "🕰" indicator lights up until shutdown. Fan speed can be adjusted without affecting the shutdown.
   • Delayed Shutdown Off: Once the 5-minute period ends, the fan turns off automatically. If lighting is on, it turns off with the fan. Press "🕰" to disable delayed shutdown and continue running the fan. Press "⌂" to immediately turn off the fan.
7. Filter Cleaning:
   
   • Filter Cleaning Reminder: After 50 hours of fan use, the filter indicator lights up to prompt cleaning or replacement. The indicator is only displayed when the fan or lighting is active.
   • Filter Cleaning Reminder Off: When the filter is cleaned or replaced, press the "✔" button to turn off the filter indicator.

2. Light Disassembly

Diagram Description: Step 1 shows a small slotted screwdriver being inserted into the gap between the light cover and the hood. Step 2 shows prying up the light from the hood and disconnecting the connector for replacement.

8. Maintenance

3. Switch Disassembly

Diagram Description: Shows the maintenance screen and switch on the upper part of the mainframe. It indicates using a screwdriver to unscrew the maintenance screen and then the switch.

Maintenance guarantees good performance. Please take good care of your appliance.

• Be sure to cut off the power supply before any maintenance operations (hold the plug and remove it).
• Perform maintenance operations with gloves to prevent cuts from sharp edges.
• Remove oil stains on the strainer and mainframe regularly to keep the appliance clean.
• The strainer should be cleaned after every 3 months of use to ensure proper smoke suction and exhaust performance.
• Perform total preventive maintenance every year to clean oil stains and guarantee good performance.
• Do not clean the appliance with water or flammable cleaning agents.

Removal of Parts

Handle parts with care during disassembly to avoid distortion or damage.

1. Grasp the oil cup and pull it out horizontally, then remove the strainer.
2. Remove the screws of the internal decorative cover, then pull it downwards.
3. Remove the screws of the case brackets and ceiling brackets, remove the entire case, then pull out the decorative cover.
4. Remove the screws securing the case cover and remove the case cover.
5. Remove the screws securing the guide ring and remove the guide ring.
6. Remove the wind wheel cap in the direction indicated by the arrow and remove the wind wheel.
7. After maintenance operations, reinstall parts in the reverse order of removal.

Cleaning of Parts

Diagram Description: Illustrations show the location of the Strainer, External decorative cover, Case cover, Guide ring, and Wind wheel on the range hood.

1. Please use a neutral detergent, soft cloth, and soft brush for cleaning parts. Do not use organic solvents.
2. Please soak parts for 30 minutes before cleaning. Avoid deformation or damage during cleaning.
3. Upon completion of part cleaning, rinse parts with fresh water and wipe dry with a soft cloth.
4. Use a soft dry cloth and a soft brush to clean electrical parts. Never clean with water or detergent.
5. If users do not clean the appliance according to the instructions, there may be a risk of fire.

Note: Maintenance of the range hood must be carried out by a trained professional.

9. Troubleshooting

● Always remove the power plug before troubleshooting

⚠️ Warning:

1. Please cut off the power supply before connecting or replacing plug-ins.
2. A damaged power cable must be replaced by a skilled person from the manufacturer, its repair department, or other similar departments.
3. Do not suck flame into the appliance. Otherwise, there may be a risk of fire.

10. Part Name Diagram

Diagram Description: An exploded view diagram shows all components of the Electrolux ERCI927SA range hood. Key parts labeled include: Electric box, Pressure rod, Circuit board, Circuit board holder, Wire clamp rubber pad, Air outlet, Rubber gasket, Capacitor, Wind wheel, Guide ring, Case cover, Wind wheel cap, Motor, Air duct, Switch (x2), Maintenance screen door (x2), Inner strainer, Outer strainer, Oil cup, LED (x4), Ceiling flange, Ceiling assembly, Internal decorative cover, Ceiling installation bracket (x4), Case installation bracket (x4), Case assembly, Switch panel (x2), and External decorative cover. The overall Hood assembly is also depicted.

11. Customer Care Center

Thailand
Consumer Care Tel : (+662) 725 9000
Electrolux Thailand Co., Ltd.
Electrolux Building 14th Floor
1910 New Phetchaburi Road,
Bangkapi, Huai Khwang, Bangkok 10310
Office Tel : (+662) 7259100
Office Fax: (+662) 7259299
Email: customercarethai@electrolux.com

Singapore
Consumer Care Center Tel: (+65) 6727 3699
Electrolux S.E.A. Pte Ltd.
351 Braddell Road
#01-04, 351 On Braddell
Singapore 579713
Email: customer-care.sin@electrolux.com

Indonesia
Hotline service: 08041119999
PT. Electrolux Indonesia
Electrolux Building
Jl.Abdul Muis No.34, Petojo Selatan,
Gambir Jakarta Pusat 10160
Email:customercare@electrolux.co.id
SMS & WA : 0812.8088.8863

Philippines
Consumer Care Center Toll Free:
1-800-10-845-CARE(2273)
Consumer Care Hotline:(+63 2)845-CARE(2273)
Electrolux Philippines, Inc.
Unit B 12F Cyber Sigma Bldg, Lawton Avenue,
McKinley West, Taguig, Philippines 1634
Trunkline:+63 2 737-4757
Website:www.electrolux.com.ph
Email:wecare@electrolux.com

Vietnam
Consumer Care Center Toll Free
1800-58-88-99
Tel: (+84 28) 39105465
Electrolux Vietnam Ltd.
Unit 1&2, 10F Sofic Tower, #10 Mai Chi Tho Street,
Thu Thiem Ward, Thu Duc City, Ho Chi Minh City, Vietnam

Malaysia
Consumer Care Center Tel: 1300-88-11-22
Electrolux Home Appliances Sdn. Bhd.
Corporate Office Address: Unit T2-7, 7th Floor,
Tower 2, PJ33, No. 3, Jalan Semangat,
Seksyen 13,46200 Petaling Jaya, Selangor.
Office Tel: (+603) 7843 5999
Office Fax: (+603) 79555511
Consumer Care Center Address: Lot C6, No. 28,
Jalan 15/22, Taman Perindustrian Tiong Nam,
40200 Shah Alam, Selangor
Consumer Care Center Fax : (+603) 5524 2521
Email : malaysia.customercare@electrolux.com

HONG KONG
SERVICE HOTLINE: (+852) 3193 9888
DCH ELECTRICAL APPLIANCES SERVICE CENTRE
4/F, DCH BUILDING, 20 ΚΑΙ CHEUNG ROAD,
KOWLOON BAY, HONG KONG
EMAIL: customercare@dch.com.hk
WEBSITE: www.electrolux.com.hk

India
Electrolux India Private Limited.
1st Floor, Plus Offices, Landmark Cyber Park,
Sector 67, Gurugram-122018 Haryana, India
Contact Number: 1800 202 1800
Website: www.electrolux.in

Electrolux Brand Philosophy

The Thoughtful Design Innovator.

Electrolux aims to evoke a feeling of "Oh! How did you know? That's exactly what I wanted!" by devoting time, knowledge, and thought to anticipating and creating appliances customers need and want. Thoughtful care means innovating with insight, focusing on the user's needs to make appliances easier to use and tasks more enjoyable, offering the ultimate 21st-century luxury: ease of mind. Electrolux is committed to making appliances safe for the environment for present and future generations.

Electrolux. Thinking of you.

Share more of our thinking at www.electrolux.com

Version Information

Version No.: MU-H-202205