FSP Switching Power Supply Compliance Verification
Details for PM100 and FSP100 Series
Original Safety Certification Details
Issued by FSP Group Inc. (全漢企業股份有限公司)
| Certification Type | EMC / Medical Category (EMC/醫療類) |
|---|---|
| Document Number | SFD15072749-R1 |
| Trade Mark | PROTEK POWER; FSP |
| Issue Date | 2023/09/11 10:26:00 |
| Remarks | PM100 series, Medical, EMC Certificate, upgraded to version 4.1. |
Verification of Compliance
Reference Number: VTN0239A/2023
Issue Date: September 06, 2023
Applicant Information
Company: FSP Group Inc.
Address: 2-3, East 3rd Street, Nanzih District, Kaohsiung City, 811 Taiwan
Manufacturer Information
Manufacturers:
- FSP Technology Inc. Kaohsiung Branch
- Protek Electronic (China) Corp.
- Zhonghan Electronics (Shenzhen) Co., Ltd.
Manufacturer Addresses:
- (1) 2-3, East 3rd Street, Nanzih District, Kaohsiung City, 811 Taiwan
- (2) No. 3, Yong Tai 1st Street, North Area Industry Tian Mei Huang Jiang, Dongguan, Guangdong 523752 China
- (3) Building A2 in Section A, Building 4,6,7 in Section C, JuYuan Industrial Zone, TangWei Village, FuYong Town, BaoAn Dist., ShenZhen City, Guangdong 518103 China
Product Details
Product: Switching Power Supply
Brand Name/Trade Mark: PROTEK POWER & FSP
Model/Type:
- PM100-xyyyy (where x = 10, 12, 13, 13-1, 14, 15, 17, 18; y = hyphen, A-Z, 0-9 or blank)
- FSP100-xM1 (where x = 1k00, 1k20, 1k30, 1k31, 1k40, 1k50, 1k70, 1k80)
Applicable Standards
The product was tested against the following standards:
- EN 60601-1-2:2015 + A1:2021 (including subclause 8.11 immunity to proximity magnetic fields, Test method refer to IEC 61000-4-39)
- BS EN 60601-1-2:2015 + A1:2021 (including subclause 8.11 immunity to proximity magnetic fields, Test method refer to IEC 61000-4-39)
- IEC 60601-1-2:2014+AMD:2020 (Edition 4.1) (including subclause 8.11 immunity to proximity magnetic fields, Test method refer to IEC 61000-4-39)
- EN 55011:2016+A1:2017+A11:2020 (Group 1, Class B)
- CISPR 11:2015+A1:2016+A2:2019
- EN 61000-3-2:2014
- IEC 61000-3-2:2018+A1:2020
- EN IEC 61000-3-2:2019 + A1:2021
- BS EN IEC 61000-3-2:2019 + A1:2021
- EN 61000-3-3:2013
- EN 61000-3-3:2013+A1:2019
- BS EN 61000-3-3:2013+A1:2019
- EN 61000-3-3:2013 +A1:2019 + A2:2021
- BS EN 61000-3-3:2013 +A1:2019 + A2:2021
- IEC 61000-3-3:2013+A1:2017
- EN 61000-3-3:2013+A1:2019+A1:2019+A2:2021
- IEC 61000-4-2:2008
- IEC 61000-4-6:2013 + C1:2015
- IEC 61000-4-3:2020
- IEC 61000-4-8:2009
- IEC 61000-4-4:2012
- IEC 61000-4-11:2020 + C1:2020 + C2:2020
- IEC 61000-4-5:2014 + A1:2017
- IEC 61000-4-39:2017
Testing and Conclusion
Test Laboratory: Compliance Certification Services Inc., Tainan Lab
Test Report Number: TMTN2302000236NE
Test Report Date: September 06, 2023
Conclusion: Based upon a review of the Test Report(s), the tested sample of the product mentioned above is deemed to comply with the requirements of the above standards.
Note: This verification is only valid for the product and configuration described and in conjunction with the test report as detailed above.
Authorized Signatory
Jeter Wu
Manager
Compliance Certification Services Inc.
