General Information
Client Information
- Applicant:
- Shenzhen Intellirocks Tech. Co., Ltd.
- Address of applicant:
- No. 2901-2904, 3002, Block C, Section 1, Chuangzhi Yuncheng Building, Liuxian Avenue, Xili Community, Xili Street, Nanshan District, Shenzhen, Guangdong, China
- Manufacturer:
- Shenzhen Intellirocks Tech. Co., Ltd.
- Address of manufacturer:
- No. 2901-2904, 3002, Block C, Section 1, Chuangzhi Yuncheng Building, Liuxian Avenue, Xili Community, Xili Street, Nanshan District, Shenzhen, Guangdong, China
General Description of EUT
- Product Name:
- Govee Smart Outdoor Plug
- Trade Name:
- /
- Model No.:
- H5160
- Adding Model(s):
- /
- Rated Voltage:
- AC 125V
- FCC ID:
- 2AQA6-H5160
- Equipment Type:
- Mobile device
Technical Characteristics of EUT
Wi-Fi
- Support Standards:
- 802.11b, 802.11g, 802.11n
- Frequency Range:
- 2412-2462MHz for 802.11b/g/n(HT20)
- RF Output Power:
- 15.90dBm (Conducted)
- Type of Modulation:
- DBPSK, BPSK, DQPSK, QPSK, 16QAM, 64QAM
- Quantity of Channels:
- 11 for 802.11b/g/n(HT20)
- Channel Separation:
- 5MHz
- Type of Antenna:
- PCB Antenna
- Antenna Gain:
- 1dBi
Bluetooth
- Bluetooth Version:
- V4.2 (BLE mode)
- Frequency Range:
- 2402-2480MHz
- RF Output Power:
- 2.28dBm (Conducted)
- Data Rate:
- 1Mbps
- Modulation:
- GFSK
- Quantity of Channels:
- 40
- Channel Separation:
- 2MHz
- Type of Antenna:
- PCB Antenna
- Antenna Gain:
- 1dBi
Standard Applicable
According to § 1.1307(b)(1) and KDB 447498 D01 General RF Exposure Guidance v06, system operating under the provisions of this section shall be operating in a manner that the public is not exposed to radio frequency energy level in excess limit for maximum permissible exposure.
Limits for Occupational / Controlled Exposure
Frequency range (MHz) | Electric Field Strength (E) (V/m) | Magnetic Field Strength (H) (A/m) | Power Density (S) (mW/cm²) | Averaging Times | E |², | H |² or S (minutes) |
---|---|---|---|---|
0.3-3.0 | 614 | 1.63 | (100)* | 6 |
3.0-30 | 1842/f | 4.89/f | (900/f)* | 6 |
30-300 | 61.4 | 0.163 | 1.0 | 6 |
300-1500 | / | / | F/300 | 6 |
1500-100000 | / | / | 5 | 6 |
Limits for General Population / Uncontrolled Exposure
Frequency range (MHz) | Electric Field Strength (E) (V/m) | Magnetic Field Strength (H) (A/m) | Power Density (S) (mW/cm²) | Averaging Times | E |², | H |² or S (minutes) |
---|---|---|---|---|
0.3-1.34 | 614 | 1.63 | (100)* | 30 |
1.34-30 | 824/f | 2.19/f | (180/f)* | 30 |
30-300 | 27.5 | 0.073 | 0.2 | 30 |
300-1500 | / | / | F/1500 | 30 |
1500-100000 | / | / | 1 | 30 |
Note: f = frequency in MHz: * = Plane-wave equivalents power density
MPE Calculation Method
- S = (30*P*G) / (377*R²)
- S = power density (in appropriate units, e.g., mW/cm²)
- P = power input to the antenna (in appropriate units, e.g., mW)
- G = power gain of the antenna in the direction of interest relative to an isotropic radiator, the power gain factor is normally numeric gain.
- R = distance to the center of radiation of the antenna (in appropriate units, e.g., cm)
MPE Calculation Result
For Wi-Fi
- Maximum Tune-Up output power:
- 16.0 (dBm)
- Maximum peak output power at antenna input terminal:
- 39.81 (mW)
- Prediction distance:
- >20(cm)
- Prediction frequency:
- 2462 (MHz)
- Antenna gain:
- 1.0 (dBi)
- Directional gain (numeric gain):
- 1.26
- The worst case is power density at prediction frequency at 20cm:
- 0.0100 (mW/cm²)
- MPE limit for general population exposure at prediction frequency:
- 1 (mW/cm²)
For Bluetooth
- Maximum Tune-Up output power:
- 2.5 (dBm)
- Maximum peak output power at antenna input terminal:
- 1.78 (mW)
- Prediction distance:
- >20(cm)
- Prediction frequency:
- 2480 (MHz)
- Antenna gain:
- 1.0 (dBi)
- Directional gain (numeric gain):
- 1.26
- The worst case is power density at prediction frequency at 20cm:
- 0.0004 (mW/cm²)
- MPE limit for general population exposure at prediction frequency:
- 1 (mW/cm²)
Mode for Simultaneous Multi-band Transmission
- Bluetooth + Wi-Fi
- The worst case is power density at prediction frequency at 20cm: 0.0100/1+0.0004/1 = 0.0104<1
Result: Pass