SECOP KLE4.0GFTX Compressor Technical Data
Model: KLE4.0GFTX
Sales Code: 106G5403
Compressor Design Specifications
| Oil type | Polyolester |
| Oil viscosity | 19,2 cSt |
| Oil quantity | 240 cm³ / 8,1 fl.oz |
| Refrigerant charge - tech. limit | 250 g / 8,8 oz |
| Free gas volume comp. | 1560 cm³ / 52,7 fl.oz |
| Weight | 8,9 kg / 19,6 lbs |
| Motor protection | external |
| Winding resistance main | 13,1 Ω (at 25°C) |
| Winding resistance aux | 25,3 Ω (at 25°C) |
| Max. winding temp. | 125°C / 257°F |
| Max. discharge temp. | 130°C / 266°F |
Additional note: Good robustness against liquid intake. Ice-cube maker optimization - indirect suction intake.
Refrigerant(s): R134a, R513A
Displacement: 4 cm³ / 0,24 cu.in
Compressors on pallet: 100
[Diagram Description: A visual representation of the SECOP KL-Series compressor unit.]
General Configurations with KLE4.0GFTX
| Feature | Conf. 1 (220-240V/50Hz) | Conf. 2 (208-230V/60Hz) |
|---|---|---|
| Motor configuration | CSIR | CSIR |
| Power supply (nominal) | 220-240V/50Hz 1~ | 208-230V/60Hz 1~ |
| Number of phases | 1 | 1 |
| Voltage range | 187-254V | 198-253V |
| Approvals | VDE, CB, UL | VDE, CB, UL |
| Starting torque | HST | HST |
| Note | -/- | -/- |
Applications with KLE4.0GFTX
| Feature | Conf. 1 | Conf. 2 |
|---|---|---|
| Refrigerant | R134a | R134a |
| Application | LBP+MBP+HBP | LBP+MBP |
| System cooling | static | static |
| Hot gas defrost | OK | OK |
| Long interval pull down | OK | OK |
Electrical Data - Configurations with KLE4.0GFTX
| Feature | Conf. 1 | Conf. 2 |
|---|---|---|
| Starting device type | relay | relay |
| Run capacitor | -/- | -/- |
| Start capacitor | 80 µF | 80 µF |
| LRA (locked rotor amps / 4s/ U(N)) | 10,5A | 10,5A |
| RLA (rated load amps / 1s/ U(N)) | 1A | 1A |
| Cut in current (U(N)) | 10,2A | 10,2A |
Compressor Dimensions and Fixation
[Diagram Description: Technical drawings illustrating the compressor's overall dimensions (Height, Length, Width) with measurements in millimeters and inches. It also shows connector positions (Suction, Discharge, Process) with details on diameter, material, and angles, and diagrams for compressor fixation points (Bolt joint, Snap-on) with mounting accessories and their part numbers.]
| Housing Dimensions | Value (mm) | Value (in) | |
|---|---|---|---|
| A Height | 182 | 7,17 | |
| B Height | 175 | 6,89 | |
| C Length shell | 198 | 7,8 | |
| D Length w. cover | 238 | 9,37 | |
| E Width | 160 | 6,3 | |
| Connector Type | Diameter (mm) | Diameter (in) | Material | Horizontal Angle | Vertical Angle | Position (l/h/w) (mm) | Position (l/h/w) (in) | Straight tube l. (mm) | Straight tube l. (in) |
|---|---|---|---|---|---|---|---|---|---|
| Suction (X) | øi 6,16-6,24 | øi 0,24-0,25 | copper | +2° | +2° | 119/73/59 | 4,7/2,9/2,3 | 14 | 0,5 |
| Discharge (Y) | øi 5,1-5,2 | øi 0,2-0,2 | copper | 35° | 30° | 117/107/66 | 4,6/4,2/2,6 | 14 | 0,5 |
| Process (Z) | øi 6,11-6,29 | øi 0,24-0,25 | copper | 13° | 40° | -88/101/71 | -3,5/4/2,8 | 14 | 0,5 |
Mounting accessories:
- Bolt joint | M6 | Ø16mm: 118-1917
- Bolt joint | Ø1/4" | Ø16mm: 118-1946
- Bolt joint | Ø1/4" | Ø19mm: 118-1949
- Snap-on | Ø7,3 | Ø16mm: 118-1947
- Multi pack: 118-1918
- Snap-on: 118-1919
Application notes: Provision for PE Grounding is located at the PE Stamp on the compressor. Suctiongas connector and Process connector can be switched (minor loss of cooling capacity).
Operating Conditions and Performance
Ambient/Machine Room Temperatures:
- Ambient temperature range: 10 - 43°C / 50 - 110°F
- Machine room temperature range: 10 - 48°C / 50 - 119°F
- Compressor cooling: static
[Diagram Description: Line graphs illustrating the operation pressure range, plotting condensing pressure against evaporation pressure for continuous and transitory operation, with temperature scales in Celsius and Fahrenheit.]
Electrical Accessories and Wiring Diagram
[Diagram Description: Schematic showing electrical components such as current relay, start capacitor, and cover/clamp/screw assemblies, along with a wiring diagram illustrating connections. Includes part numbers for components and alternative components.]
Components:
- a5 current relay (T1189/L6-S3): 117U7073
- c start capacitor (80µF, 6.3mm): 117U5001
- b, d cover + clamp + screws (5VA-compl.): 103N0600
Alternative components:
- b, d 100x cover + clamp + screws (5VA): 103N2060
- b, d cover + clamp + screws (5VA) in bag: 103N1060
Performance Data at Standard Conditions
[Diagram Description: Tables detailing performance metrics like Cooling Capacity (W, Btu/h, kcal/h), COP (W/W, Btu/Wh, kcal/Wh), Power Consumption (W), Current Consumption (A), and Ref. Mass Flow (kg/h) under various standard conditions (ASHRAE LBP/MBP/HBP, EN12900 LBP/MBP/HBP) for both 220-240V/50Hz and 208-230V/60Hz configurations.]
[Diagram Description: Detailed performance tables showing Cooling Capacity, COP, and EER across different condensing pressures, return gas temperatures, and liquid temperatures for both configurations.]
