K120 Technical Specifications and Dimensions

Product Overview

This document presents detailed technical drawings and dimensional specifications for the K120 product. The object is a rectangular enclosure or component featuring a ribbed top surface and mounting provisions.

Overall Dimensions

Overall Length: 127 mm
Overall Width: 27.4 mm (at base), 26.7 mm (at top)
Overall Height: 21 mm

Detailed Views

Top View (Length 127 mm)

This view illustrates the overall length of the component, measuring 127 mm. The central body section has a length of 110 mm, with end sections of 8.5 mm each. The top surface of the central section is characterized by a ribbed pattern.

Front/Back View (Width 27.4 mm, Height 21 mm)

This view displays the component's overall width and height. The width tapers slightly, measuring 27.4 mm at the base and 26.7 mm at the top. A slot or opening is visible on the front face of the component.

Side View (Main Body Length 110 mm, Main Body Height 20.45 mm)

This view details the main body of the component, which has a length of 110 mm and a height of 20.45 mm. It highlights the mounting features:

Two mounting holes are located on each side.
Hole Diameter: Ø 3.2 mm.
Positioning from the end of the 110 mm section: The center of the hole is 8.5 mm from the end.
Positioning relative to the main body height: The center of the hole is 20.45 mm from the bottom edge and 6.95 mm from the top edge.

Internal features, such as mounting posts or guides, are indicated within the main body. The top surface of the central section features a ribbed pattern.

	Potentiometer Technical Drawings and Dimensions This document provides detailed technical drawings and dimensional specifications for a potentiometer, including side and top views, shaft orientation, and mounting hole layout.
	Kitchen Hood Technical Dimensions and Specifications Detailed technical drawing and dimensional specifications for a kitchen hood, including height, width, depth, and duct dimensions.
	Bathroom Vanity Dimensional Specifications and Drawings Detailed dimensional drawings and specifications for wall-mounted bathroom vanities, including top, front, back, and isometric views with measurements in millimeters and inches.
	Faucet Technical Dimensions and Specifications Detailed technical drawing and specifications for a modern pull-down faucet, outlining all key dimensions, base measurements, spout details, and mounting specifications.
	Appliance Installation Dimensions and Clearances Technical specifications detailing the required installation dimensions and ventilation clearances for an appliance, including height, width, depth, and compartment sizes.
	Product Dimensions: 24.93 ft x 9.52 ft Detailed specifications for a product component, illustrating its dimensions as 24.93 feet in length and 9.52 feet in height, featuring a mesh-like pattern.
	Appliance Installation Dimensions and Cabinet Integration Guide Comprehensive guide detailing the required installation dimensions for built-in kitchen appliances, ensuring proper fit and ventilation. Includes specific measurements for height, width, depth, and niche requirements.
	Cylindrical Component Dimensions and Specifications Detailed specifications including length, height, width, and connection size for a cylindrical component, presented in both imperial and metric units.