1. Electrical Specifications
Accuracy is indicated as ± [% readings + (no. of digits*resolution)] at 23°C ±5°C, <60%RH
Continuity test on protective and equalizing conductors
| Range | Resolution | Accuracy | Overload protection |
|---|---|---|---|
| 0.00 – 19.99Ω | 0.01Ω | ±(2.0%rdg + 3dgt) | 605Vrms Max |
Test current: >200mA DC for R≤5Ω (includes calibration of test leads)
>10mA DC per R>5Ω (includes calibration of test leads)
Open voltage: 4 < Vo < 24VDC
Insulation Resistance (DC voltage)
| Test voltage | Range | Resolution | Accuracy | Overload protection |
|---|---|---|---|---|
| 250V | 0.001 – 0.100MΩ | 0.001MΩ | ±10dgt | 605Vrms Max |
| 0.101 – 3.999MΩ | 0.001MΩ | ±(2.0%rdg + 5dgt) | ||
| 4.00 – 39.99MΩ | 0.01MΩ | ±(5.0%rdg + 5dgt) | ||
| 40.0 – 399.9MΩ | 0.1MΩ | ±(5.0%rdg + 5dgt) | ||
| 400 – 1000MΩ | 1MΩ | ±15dgt | ||
| 500V | 0.001 – 0.250MΩ | 0.001MΩ | ±15dgt | |
| 0.251 – 3.999MΩ | 0.001MΩ | ±(2.0%rdg + 5dgt) | ||
| 4.00 – 39.99MΩ | 0.01MΩ | ±(2.0%rdg + 5dgt) | ||
| 40.0 – 399.9MΩ | 0.1MΩ | ±(5.0%rdg + 5dgt) | ||
| 400 – 2000MΩ | 1MΩ | ±(5.0%rdg + 5dgt) | ||
| 1000V | 0.001 – 0.250MΩ | 0.001MΩ | ±15dgt | |
| 0.251 – 3.999MΩ | 0.001MΩ | ±(2.0%rdg + 5dgt) | ||
| 4.00 – 39.99MΩ | 0.01MΩ | ±(2.0%rdg + 5dgt) | 605Vrms Max | |
| 40.0 – 399.9MΩ | 0.1MΩ | ±(3.0%rdg + 5dgt) | ||
| 400 – 1000MΩ | 1MΩ | ±(5.0%rdg + 10dgt) | ||
| 1000 – 4000MΩ | 1MΩ | ±(5.0%rdg + 10dgt) |
Open voltage: <1.3 x Vo
Accuracy nominal test voltage: -0%, +10%
Short circuit current: <3.0mA
Nominal test current: 1mA @ 1KΩ x V (1mA @ 500KΩ)
DC Voltage
| Range | Resolution | Accuracy | Input impedance | Overload protection |
|---|---|---|---|---|
| 0.1 – 600.0V | 0.1V | ±(0.5%rdg + 1dgt) | 3MΩ | 605Vrms Max |
AC Voltage
| Range | Resolution | Accuracy | Input impedance | Overload protection |
|---|---|---|---|---|
| 0.1 – 600.0V | 0.1V | ±(0.8%rdg + 4dgt) | 3MΩ | 605Vrms Max |
Max crest factor: √2
Resistance and Continuity test
| Range | Resolution | Accuracy | Overload protection |
|---|---|---|---|
| 0.00 – 19.99Ω | 0.01Ω | ±(2.0%rdg + 3dgt) | 605Vrms max for 1min |
Buzzer sound for resistance <2Ω
2. General Specifications
Display
Features: double LCD Custom 4 digit with rdg max 9999 points, sign and decimal point
Sample rate: 2times/s
Conversion: Average value
Power Supply
Batteries: 4 x 1.5V type LR6-AA-AM3-MN 1500 alkaline batteries
Low battery indication: ? symbol at display
Life batteries:
- Multimeter: about 50 hours
- Lo: > 1000 test @ 1Ω
- MΩ 250: > 1000 test @ 480kΩ
- MΩ 500: > 1000 test @ 480kΩ
- MΩ 1000: > 1000 test @ 480kΩ
Mechanical Features
Dimensions (L x W x H): 240 x 100 x 45mm
Weight (included batteries): 450g
Working Environmental Conditions
Reference temperature: 23°C ± 5°C
Working temperature: 0°C ÷ 50°C
Allowed relative humidity: <70%RH
Storage temperature: -10°C ÷ 60°C
Storage humidity: <70%RH
Reference Standards
- Continuity test with 200mA: IEC/EN61557-4
- Insulation resistance: IEC/EN61557-2
General Reference Standards
- Safety of measuring instruments: IEC/EN61010-1
- EMC: IEC/EN61326-1
- Product type standard: IEC/EN61557
- Insulation: double insulation
- Pollution degree: 2
- Overvoltage category: CAT III 550V (Phase – Ground), CAT III 550V (Phase – Phase)
Max height of use: 2000m
Conformity
This product conforms to the prescriptions of the European directive on low voltage 2014/35/EU and to EMC directive 2014/30/EU.
This product conforms to the prescriptions of the European directive 2011/65/EU (RoHS) and the European directive 2012/19/EU (WEEE).
EURO-INDEX Services
EURO-INDEX is a manufacturer, importer, and distributor of various A-brands in the field of test and measurement instruments. Additionally, they provide a range of services to optimize the use of these instruments in your business operations. This includes maintenance, repair, and calibration of instruments, as well as knowledge sharing via EURO-INDEX Academy and instrument rental.
Authorized Service Center
EURO-INDEX B.V. is an Authorized Service Center for all represented brands. This means your instruments are handled by technicians trained by the manufacturer, equipped with the correct tools and software. Only original parts are used, and your instrument's warranty and certifications (ATEX, EN50379, etc.) remain intact.
Calibration Laboratory
The laboratory in the Netherlands has RvA accreditation according to EN-ISO/IEC 17025. This accreditation applies to quantities as specified in the scope under accreditation number K105. RvA calibration certificates are internationally accepted and equivalent to BELAC.
Mobile Service
In addition to the fixed calibration laboratories in Zaventem and Capelle aan den IJssel, EURO-INDEX also operates a mobile laboratory named "Mobile Service". This offers trusted service and quality at your doorstep!
KWS® Service System
KWS® is a unique service system for your measuring instruments, offering periodic maintenance and calibration at fixed, low costs. Through a free web portal (mijnkws.be), you have access to your calibration certificates anytime, anywhere.
Instrument Rental
- Extensive assortment
- Accuracy demonstrable via current calibration certificate
- Expert advice
- Complete delivery including accessories
EURO-INDEX Academy
- Training, seminars, and workshops
- Demonstration and instruction videos
- Application notes
