Introduction

This document provides essential installation instructions for the Beko BCT904IG induction cooktop. It details safety measures, preparation steps, electrical connections, and mounting procedures to ensure a correct and safe installation. Please read through all instructions carefully before beginning the installation process.

Safety First

Installation must be performed by a qualified professional to ensure warranty validity and safety. Always adhere to local electrical and gas regulations. Wear protective gloves during installation and ensure electrical connections are inaccessible after installation. Surfaces of surrounding furniture must be heat-resistant (minimum 100°C).

Preparation and Installation

Proper preparation of the installation site is crucial. This includes cutting the worktop to the specified dimensions and ensuring adequate ventilation. The guide outlines specific clearances required for different installation scenarios, such as placement above drawers or ovens. Detailed diagrams illustrate the necessary measurements and steps for securing the appliance.

Electrical Connection

The appliance must be connected to a grounded outlet or line with the correct voltage and protection as specified. Ensure the grounding is performed by a qualified electrician. Disconnect the power supply before starting any electrical work. The document provides wiring diagrams for various power supply types (1-phase, 2-phase, 3-phase) and emphasizes compliance with national and local electrical regulations.

Securing the Appliance

The guide details how to affix the sealing gasket and secure the appliance using the provided springs and clamps. It stresses the importance of ensuring the hob is parallel to the worktop for a secure and proper fit. Final inspection includes turning on the mains supply and checking that each cooking hob heats correctly.