Manuals+

User Guide for SCORPION models including: Tribunus III, Tribunus III Telemetry ESC Temperature Controller Fan, Telemetry ESC Temperature Controller Fan, Temperature Controller Fan, Controller Fan, Fan

Copie de Scorpion user guide for JR DMSS

DAGdWjOF9qY, BAFvEJyCHg4, 0

Mattéo Lefebvre

Scorpion Tribunus III Telemetry JR DMSS Protocol

17 hours ago — Scorpion Tribunus III Telemetry JR DMSS Protocol : User Guide. 1. Connect Tribunus III ESC to your PC using USB-C Cable (or Vlink II cable diode cable) ...

16 uur geleden — Scorpion Tribunus III Telemetry JR DMSS Protocol : User Guide. 1. Connect Tribunus III ESC to your PC using USB-C Cable (or Vlink II cable diode cable) ...


File Info : application/pdf, 8 Pages, 4.80MB

PDF preview unavailable. Download the PDF instead.

JR DMSS Scorpion Tribunus III ESC Telemetry Guide 
www.scorpionsystem.com Scorpion Tribunus III Telemetry + JR DMSS Protocol : User Guide
I.Software
1. Connect Tribunus III ESC to your PC using USB-C Cable (or Vlink II cable + diode cable). 2. Make sure you are using FW 16 or higher
1

NOTE: JR DMSS protocol is functional with Scorpion Tribunus III ESCs ONLY
3. Select JR DMSS Port in value A5 - Communication Protocol
Make sure your JR remote, is as well updated to the latest FW to ensure proper function !
2

4. Set the correct pole pair (E3) and gear ratio (E2)

Note: Pole pair is 1/2 of the pole count of the motor (pole count / 2 = pole pairs)

Note : If you do not set pole pair and gear ratio the electrical RPM will be displayed in the telemetry field rather than

mechanical RPM

3

II.Hardware connection
5. Connect your Tribunus-III ESC to your JR PROPO receiver
Connection is made with a simple male to male servo extension cable (patch cable) Connect the PC.PORT of the ESC, to the SENS port of the JRPROPO receiver
4

6.Remove propeller / pinion from the motor, check all connections, and apply suitable battery power to the ESC
2
5

III.Transmitter setup
1- Scroll to the telemetry page --> Press INH and select the data wanted -->telemetry values you can set are--> TEMP-RPM-AMP-CONSUMPTION-VOLTAGE

Temp RPM

F-Pack(V)= Voltage F-Pack(C)= Compsumption F-Pack(A)-Current

Go back to main page
6

2-Set the data more precisely (Capacity amount of the battery or voltage alarm) Function list --> scroll to System list--> telemetry--> choose the data

Set amount of capacity in your battery

Go back to main page
Example for the capacity alarm
Set the % of the battery you want to use

Capacity is how much remaining and consumption is how much you haved used

7

IIII.Result
Set the widgets with your desired values according to your preference. Values sent by the ESC are : Voltage / Temp /AMP/RPM / Consumption
8

References

Canva Canva