Busy Ball Popper #1593 User's Guide

About the Busy Ball Popper

The Busy Ball Popper is an air-powered, sensory toy designed for engaging play. It features 5 colorful balls that pop up and roll down a track when activated by a switch. The toy also plays silly sound effects and lively songs, providing an immersive experience. It operates for approximately 20 seconds per activation and includes an on/off switch to conserve battery life. A clear dome keeps the balls in action, making it ideal for enhancing visual attention and tracking skills.

Specifications:

• Size: 13" Length x 5" Width x 18" Height
• Weight: 3½ lbs
• Power: Requires 4 D Batteries (not included). Alkaline batteries are recommended for longer life. Do not use rechargeable batteries as they may supply lower voltage and affect performance.

Operation

Battery Installation

1. The Busy Ball Popper requires four D batteries (Not included).
2. The battery compartment is located on the back of the unit.
3. To remove the battery compartment cover, unscrew the small Phillips Head screw, then slide the cover back and then off.
4. Install new batteries, being careful to observe proper (+) & (-) battery polarity.
5. Replace the cover and screw it back into place.

Connecting a Capability Switch

Turn the ON/OFF switch located on the back of the unit to the ON position. Connect the unit to any external capability switch via the 1/8" jack, located on the back of the unit. If you need to use a 1¼" to 1/8" adapter for your switch, it must be a mono adapter, not stereo.

Make sure that the connections between the external capability switch and the adapter (if applicable) and the jack on the Busy Ball Popper is plugged in all the way. There should be no gaps.

Playing with the Busy Ball Popper

Load the supplied balls into the ball slid. Begin play by activating your external capability switch. This will start the balls popping up into the clear dome and rolling down the track, while simultaneously playing silly sound effects and up to eight lively songs. The Busy Ball Popper will continue playing while your switch continues to be activated. Once you release your switch, there will be a brief delay then all will stop.

Troubleshooting

Problem: The Busy Ball Popper does not work.

• Action #1: Check or replace the four D batteries with fresh new batteries. Never mix different brands or old and new batteries.
• Action #2: Make sure the Busy Ball Popper is on a flat level surface and that nothing is restricting any of the balls. Use only the balls included with Busy Ball Popper, other balls will not work with this product.
• Action #3: Try a different switch that you know works with other toys/devices to rule out the Busy Ball Popper as the source of the problem.

Care of Unit

• The Busy Ball Popper can be wiped clean with any household multi-purpose cleaner and disinfectant.
• Do not submerge the unit, as it will damage the contents and the electrical components.
• Do not use abrasive cleaners, as they will scratch the surface of the unit.