Instruction Manual for OMPHOBBY models including: M2 Explore, M2EXP

模型

Banggood

We recommend that you keep this manual for future reference regar

Explore. Instruction manual. ... Mishandling due to failure to follow these instructions may result in damage or injury. 因为疏忽这些操作说明而使用错误可能造成...


File Info : application/pdf, 25 Pages, 11.04MB

PDF preview unavailable. Download the PDF instead.

20200709030512M2EXP-Instruction-V2
EXPLORE
INSTRUCTION MANUAL

#1 BY DESIGN
Thank you for buying OMP HOBBY products.The M2EXP is the
latest technology in Rotary RC mldels.Please read this manual
carefully before assembling and flying the New M2EXP helicopter.
We recommend that you keep this manual for future reference regarding and maintenance     

INTRODUCTION 

-EXPLORE

Thank you for buying OMPHOBBY Products. The M2EXP Helicopter is designed as an easy to use,full featured Helicopter R/C model capable of all forms of rotary flight. Please read the manual carefully before assembling the model, and follow all precautions and recommendations located within the manual. Be sure to retain the manal for future reference, routine maintenance, and tuning.
The M2EXP is a new product developed by OMPHOBBY. lt features the best design available on the Micro-Heli market to date, providing flying stability for beginners,full aerobatic capbility for advanced fliers, and unsurpassed reliability for customer support.
 EXP 
EXP EXP

WARNING LABEL LEGEND 

!

WARNING 

Mishandling due to failure to follow these instructions may result in damage or injury. 

!

CAUTION 

Mishandling due to failure to follow these instructions may result in danger. 

FORBIDDEN Do not attempt under any circumstances  

IMPORTANT NOTES 
R/C helicopters, including The M2EXP are not toys.R/C helicopter utilize various high-tech products and technologies to provide superior performance.lmproper use of this product can result in serious injury or even death. Please read this manual carefully before using and make sure to be conscious of your own personal safety and the safety of others and your environment when operating allOMPHOBBY products.
Manufacturer and seller assume no liability for the operation or the use of this product . lntended for use only by adults with experience flying remote control helicopters at a legal flying field. After the sale of this product we cannot maintain any control over its operation or usage.
EXP 
  
We recommend that you obtain the assistance of an experienced pilot before attempting to fly our products for the first time, A lcoal expert is the best way to properly assmble , setup, and fly your mldel for the first time .M2 Helicopter requires a certain degree of skill to operate, and is a consumer item. Any damage or dissatisfaction as a result or accidents or modifications are not covered by any warrantee and cannot be returned for repair or replacement. Please contact our distributors for free technical consultation and parts at discounted rates when you experience problems during operation or maintenance.
 

SAFETY NOTES 

!

CAUTION 

Fly only in safe areas,away from other people. Do not operate R/C aircraft within the vicinity of homes or crowds of people .R/C aircraft are prone to accidents,failures,and crashes due to a variety of reasons including,lack of maintenance,pilot error, and radio interference. Pilots are responsible for their actions and damage or injury occurring during the poeration or as of a result of R/C aircraft models.
 

EN

2

WWW.OMPHOBBY.COM

Precautions before use 

FORBIDDEN


LOCATE AN APPROPRIATE LOCATION 

R/C helicopters fly at high speed ,thus posing a certain degree of potential danger .Choose a legal flying field consisting of flat,smooth groumd without obstacles. Do not fly near buildings,high voltage cables ,or trees to ensure the safety of yourself,others and your model.
For the first practice,please choose a legal flying field and can use a training skid to fly for reducing the damage .Do not fly your model in inclement weather,such as rain,wind snow or darkness.


 

FORBIDDEN


PREVENT MOISTURE 

R/C models are composed of many precision electrical components.
It is crtical to keep the model and associated equipment away from moisture and other contaminants.The introduction or exposure to water or moisture in any form can cause the model to malfuntion resulting in loss of use,or a crash .Do not operate or expose to rain or moisture
  

-EXPLORE

FORBIDDEN


PREVENT OPETATION 

Please use the replacement of parts on the manual to ensure the safety of instructors. This product is for R/C model,so do not use for other purpose.
 

!

WARNING 

OBTAIN THE ASSISTANCE OF AN EXPERIENCED PILOT 

Before turning on your model and transmitter,check to make sure no one else is operating on the same frequency.Frequency interference can cause your model,or other models to crash.
The guidance provided by an experienced pilot will be invaluable for the assembly,tuning,trimming,and actual first flight. (Recommend you to practice with computer-based flight simulator.)


  

!

WARNING 

SAFE OPERATION 

Operate this unit within your ability.Do not fly under tired condition and improper operation may cause in danger



Beer

!

CAUTION 

ALWAYS BE AWARE OF THE ROTATING BLADES 

During the operation of the helicopter,the main rotor and tail rotor will be spinning at a high rate of speed .The blades are capable of inflicting serious bodily injury and damage to the environment.Be conscious of your actions,and careful to keep your face,eyes,hands,and loose clothing away from the blades.Always fly the model a safe distance from yourself and others,as well as surrounding objects.Never take your eyes off the model or leave it unattended while it is turned on.Immediately turn off the model and transmitter when you have landed model.



!

CAUTION 

KEEP AWAY FROM HEAT 

R/C models are made of various forms of plastisc.Plastic is very susceptible to damage or deformation due to extreme heat and clod climate .Make sure not to store the model near any source of heat such as an oven,or heater.lt is best to store the model indoors ,in a climate-controlled,room temperature environment.
 

WWW.OMPHOBBY.COM

3

EN

EQUIPMENT REQUIRED FOR ASSEMBLY 

-EXPLORE

Cutter Knife 

Scissors 

Needle Nose Pliers 

Diagonal Cutting Pliers 

Philips Screw Drive 

Hexagon Screw Driver 

Oil


When you see the marks as below,please use glue or greae to ensure flying safety. 

CA

AB Glue AB

Apply BLUE Threadlock 

Apply Petroleum-Based, Light Viscosity Lube 

Loosely Tighten 

Apply NO Threadlock 
Apply MEDIUM CA 
EN

Grease
Apply Synthetic Grease 

Fully Tighten 

2
Repeat Multiple Times 

1
BLUE Glue width:approx 1mm 

4

WWW.OMPHOBBY.COM

Specifications 

135

408

70

400

Specifications 
Lenght408mm Height135mm Main Blade173mm Main Rotor Diameter400mm Tail Rotor Diameter71.5mm Flying Weight306g

408mm 135mm 173mm 400mm 71.5mm 306g

Features 

Dual Brushless direct drive motors
The blade clip and swash plate are designed using a carbon composite technology
Air frame all carbon fiber light weight design
Streamlined low wind resistance hood design The landing gear is made of high strength nylon, more forgiving than the carbon fiber plates in previous version. The tailpipe is designed with an inverted water drop shape
The integrated six-sided hollow CNC tailpipe fixing mount
The directly connected rear carbon fiber fin with tail motor mount is a novel design making the structure light weight. Integrated, Dual Brushless ESC, Flight Controller and Receiver
opened the flight controller to allow for adjusting of the flight controller parameters.

      6  OFS 

WWW.OMPHOBBY.COM

5

EN

step 1 
Ball Bearing-MR63ZZ (Ø3xØ6x2.5mm)x2

Obverse of bearing faces inside. 

!

CAUTION 

Grease
Flat bearing gasket (Ø4xØ6x0.1mm)

Thrust braring and washer for radial bearing are wear items,and thus should be inspected for replacement after every 20 flights.
For flights with high headspeed ,the inspection interval should be reduced to ensure flight safety.
  

Ball Bearing-MR63 (Ø3xØ6x2mm)x2
Main collet bearing bushing (Ø3.1xØ4.3x1.9mm)x2
Flat bearing gasket (Ø4xØ6x0.1mm)x2
Thrust bearing (Ø3xØ6x2.8)

Thrust bearing (Ø3xØ6x2.8mm)
Ball Bearing-MR63 (Ø3xØ6x2mm)

!

CAUTION 

Thrust bearing (Ø3xØ6x2.8)

Grease

(OUT) 

(IN) 


Main collet bearing bushing (Ø3.1xØ4.3x1.9mm)
Ball Bearing-MR63ZZ (Ø3xØ6x2.5mm)



!

CAUTION 




Washer (Ø2.1xØ5x0.2mm)x2

Feathering shaft Ø5x38.9mm
Grease
Washer (Ø3.1xØ4.5x0.6mm)

Pay attention to the direction
of the copper washer 
Damper rubber

!

CAUTION 

 Ø2.95xØ5.95x2.9mm

Washer 
Ø2.1xØ5x0.2mm

Socket screw (M2x6mm)x2

Washer (Ø3.1xØ4.5x0.6mm)x2

EN

Damper rubber-red  (Ø2.95xØ5.95x2.9mm)x2
6

Socket screw  M2x6mm
WWW.OMPHOBBY.COM

step 2 

-EXPLORE

Socket screw 
M2.5x7mm

Motor Mount 



Spindle retaining ring Socket screw



M3X2.5

Hexagon socket head tapping screw  ST1.7x8mm
Socket screw  M1.6x6mm

Steering gear mount 

Main Motor 

Hexagon socket head tapping screw  (ST1.7x8mm)X2
Socket screw (M2.5x7mm)x3

Socket screw (M1.6x6mm)x2



Socket screw (M1.6x4mm)x6

Socket screw  (M3X2.5)x1
Bearing-684ZZ (Ø4xØ9x3mm)x1

Hexagon socket head cap screw  M1.6x4mm

WWW.OMPHOBBY.COM

7

Hexagon socket head tapping screw  ST1.7x8mm Bearing-684ZZ  (Ø4xØ9x4mm)x1 Concentricity retention column 
Main Shaft 
EN

step 3 
Canopy Support 
Socket screw  M1.6x4mm

Rear reinforcing plate 

Frame upper side panel 

Canopy Support 

-EXPLORE

Socket screw  (M1.6x3mm)x4

Socket screw  (M1.6x4mm)x6

Frame widening mount 
Socket screw  M1.6x3mm



Frame upper side panel 

Rear reinforcing plate 

Hexagon socket head tapping screw  ST1.7x4

Socket screw 
M1.6x3mm

Frame widening mount 

Frame lower right panel 

Socket screw 
M1.6x4mm

Canopy Support 

Socket screw  (M1.6x3mm)x2

Hexagon socket head tapping screw 
(ST1.7x4mm)x4

Battery guide screw
sleeve 

Tail rotor 

EN

Socket screw 
M1.6x3mm

Frame lower left side panel 



8

WWW.OMPHOBBY.COM

Battery buckle 
Hexagon socket head tapping screw  ST1.7x4

step 4 

Hexagon socket head tapping screw  ST1.7x6
Hexagon socket head tapping screw  ST1.7x4

Socket screw 
M1.6x3mm



Frame upper side panel 

Socket screw  (M1.6x3mm)x4

Hexagon socket head tapping screw 
(ST1.7x4)x4

Hexagon socket head tapping screw 
(ST1.7x6)x2

-EXPLORE

Hexagon socket head tapping screw  ST1.7x6
Hexagon socket head tapping screw  ST1.7x4

Socket screw 
M1.6x3mm

WWW.OMPHOBBY.COM

9

EN

step 5 

Socket screw 
M2x10mm-L2.5

Washer 
Ø2.1xØ3.6x0.2mm

M2 Nut M2

Flange bearing MF52ZZ  Ø2xØ5x2.5mm
Main Pitch Control Arm 

Copper sets Ø2.xØ3.9x2.2mm

Flange bearing MF52ZZ  Ø2xØ5x2.5mm

Washer 
Ø2.1xØ3.6x0.2mm

-EXPLORE
Socket screw  M2x10mm-L4

Socket screw (M2x10mm-L2.5)x2
Washer (Ø2.1xØ3.6x0.2mm)x4
Flange bearing MF52ZZ (Ø2xØ5x2.5mm)x4
Copper sets (Ø2.xØ3.9x2.2mm)X2
Socket screw (M2x10mm-L4)x1
M2 Nut M2(M2)x1
Socket screw  (M1.4x4-L2)x4
EN

Swash plate 

10

WWW.OMPHOBBY.COM

step 6 



Hexagon socket head machine screw 
M1.6x8mm

Socket screw 
(M1.6x3mm)x8

Hexagon socket head machine screw 
M1.6x8mm

Socket screw 
(M1.6x8mm)x4

Socket screw  M1.6x3mm

-EXPLORE
Landing skid mount 
Landing skid 

Socket screw  M1.6x3mm

EN

WWW.OMPHOBBY.COM

11

Socket screw  M1.6x3mm

step 7 
Socket screw  M1.6x3mm

Socket screw  (M1.6x3mm)x5

Socket screw  (M1.6x6mm)x2



Tail motor 

-EXPLORE


Socket screw  M1.6x3mm

Vertical wing 

Socket screw 
M1.6x6mm

Socket screw  (M1.6x4mm)x1

Socket screw 
(M1.6x12mm-L4)x2

Socket screw  M1.6x4mm

Socket screw  (4) M1.6x12mm

EN

12

WWW.OMPHOBBY.COM

step 8 
Socket screw  (M1.6x3mm)x2
Socket screw  (M1.6x4)x1
Linkage Ball (Ø3.175x3-M1.6)x1
M1.6 Nut (M1.6)x1

Socket screw 
M1.6x4mm

Servo Arm 

M1.6 Nut M1.6

/

Socket screw  M1.6x4mm
Linkage Ball (Ø3.175x3-M1.6)

-EXPLORE

Socket screw  M1.6x4mm
Servo Arm 

Linkage Ball (Ø3.175x3-M1.6)

/

M1.6 Nut M1.6

Socket screw 
M1.6x4mm

Socket screw 
(M1.6x4)x2

Linkage Ball (Ø3.175x3-M1.6)x2

M1.6 Nut (M1.6)x2

Socket screw 
(M1.6x4mm)x4

/

Socket screw 
M1.6x4mm

M1.6 Nut M1.6
Servo Arm 
Linkage Ball (Ø3.175x3-M1.6)

Socket screw 
M1.6x4mm

EN

WWW.OMPHOBBY.COM

13

step 9 
10mm
28.2mm 28.2mmx3 Linkage rod Approx.28.2mmx3

CH3 Linkage rod CH3 
CH2 Linkage rod CH2 

-EXPLORE
CH1 Linkage rod CH1 

Flight Control


Double-sided tape


!

CAUTION 

Note:Fist,the double-sided damping rubber should be fully fitted with the receiver board, and then install the flight control.The flight control must be completely parallel to the fuselage to achieve the best flight performance.
   

EN

14

WWW.OMPHOBBY.COM

step 10 

-EXPLORE

Socket screw  (M2x12mm-L4)x2
Washer  Ø2.1xØ10x0.3mm

Socket screw 
(M2x12mm-L4)x2

M2 Nut M2(M2)x2

Main Blade 

M2 Nut M2

Washer  (Ø2.1xØ10x0.3mm)x4

Socket screw  (M1.6x6mm)x2

Tail Blade 
Socket screw  M1.6x6mm

EN

WWW.OMPHOBBY.COM

15

step 11 
Hook and loop tape 

-EXPLORE
Battery mount 
Hook and loop tapehooked 
Hook and loop tapefuzzy 
Battery 

Align the sides of the panel with the fuselage bettery compertment slideay, then push it hard to hear a "click" to indicate that it is in place.
 "" 
Battery latch position


EN

16

WWW.OMPHOBBY.COM

step 12 
Canopy 

Canopy protector 

-EXPLORE

EN

WWW.OMPHOBBY.COM

17

step 13 
CH3 CH1

CH2

Data  5V 

Data 3.3V  

MAIN MOTOR

LED TAIL MOTOR BIND

SET
SERVO PITCH SPEED AGILE GYRO

RUDD ELEV AILE

POWER

Antenna 

EN

18

WWW.OMPHOBBY.COM

Spare parts picture-1 -1

Model: OSHM2081 : OSHM2081

Package: Hang tag +PE bag +PE

Product name: Metal Main Rotor Housing set : -EXP

: M2-EXP

Model: OSHM2082 : OSHM2082

Package: Hang tag +PE bag +PE

Product name: Plastics Main Rotor Holder set : -EXP



: M2-EXP

Model: OSHM2083 : OSHM2083

Package: Hang tag +PE bag +PE

Product name: Croduct Phase Panel Set : -EXP

: M2-EXP

Model: OSHM2084 : OSHM2084

Package: Hang tag +PE bag +PE

Product name: Servo Mount set : 

: M2-EXP

M2*10-L4=1PCS M2=1PCS

Ø3xØ4.4x1.9=2PCS Ø3xØ6x2=2PCS Ø3xØ6x2.5=2PCS

ST1.7*8=2PCS

M2.5 M1.6*6=6PCS

Model: OSHM2085 : OSHM2085

Package: Hang tag +PE bag +PE

Product name: Tail Boom Mount Set : 

: M2-EXP M2-2020

Model: OSHM2086 : OSHM2086

Package: Hang tag +PE bag +PE

Product name: Frame Upper Carbon Fiber Set : 

: M2-EXP

Model: OSHM2087 : OSHM2087

Package: Hang tag +PE bag +PE

Product name: Fuselage Lower Left Carbon Fiber Board Set : 

: M2-EXP

Model: OSHM2088 : OSHM2088

Package: Hang tag +PE bag +PE

Product name: Fuselage Lower Right Carbon Fiber Board Set : 

: M2-EXP





0.8mm

0.8mm

M1.6*4=5PCS M2*4=2PCS M2*12=2PCS

0.8mm

2PCS

Model: OSHM2089 : OSHM2089

Package: Hang tag +PE bag +PE

Product name: Flight Control Mounting Panel Set : 

: M2-EXP

Model: OSHM2090 : OSHM2090

Package: Hang tag +PE bag +PE

Product name: Landing Skids Set(Orange) : -()

: M2-EXP M2-2020

Model: OSHM2091 : OSHM2091

Package: Hang tag +PE bag +PE

Product name: Landing Skids Set(Orange) : -()

: M2-EXP M2-2020

Model: OSHM2092 : OSHM2092

Package: Hang tag +PE bag +PE

Product name: Landing Skids Set(Orange) : -()

: M2-EXP M2-2020

1PCS

1PCS

1PCS

1PCS

ST1.7*6=2PCS

ST1.7*4=2PCS

Model: OSHM2093 : OSHM2093

Package: Hang tag +PE bag +PE

Product name: Landing Skids Mounts Set : 

Model: OSHM2094 : OSHM2094

Package: Hang tag +PE bag +PE

Product name: Frame Front Reinforcement Plate Set : -EXP

Model: OSHM2095 : OSHM2095

Package: Hang tag +PE bag +PE

Product name: Frame Widening Mount Set : 

Model: OSHM2096 : OSHM2096
Product name: Tail Boom Set : -EXP

Package: Hang tag +PE bag +PE

: M2-EXP M2-2020



: M2-EXP

: M2-EXP

: M2-EXP M2-2020

2PCS

1SET

OMPHOBBY 

4.9

2PCS

1PCS

M1.6*8=4PCS M1.6*3=8PCS

Ø3.175x3-M1.6=1PCS

M1.6=1PCS

M1.6*4=2PCS

2PCS

Model: OSHM2097 : OSHM2097

Package: Hang tag +PE bag +PE

Product name: Vertical Rotor Set(Orange) : -EXP

: M2-EXP M2-2020

2PCS

Model: OSHM2098 : OSHM2098

Package: Hang tag +PE bag +PE

Product name: Tail Boom Inside Mount Set : 

: M2-EXP

Model: OSHM2099 : OSHM2099

Package: Hang tag +PE bag +PE

Product name: Tail motor reinforced plate group : 

: M2-EXP

Model: OSHM2100 : OSHM2100

Package: Hang tag +PE bag +PE

Product name: Frame Rear Reinforcement Plate Set : 

: M2-EXP

Ø2.5

1PCS

--

M1.6*6=2PCS M1.6*3=2PCS

0.8mm 2PCS

EN

WWW.OMPHOBBY.COM

19

20

Spare parts picture-2 -2

Model: OSHM2101 : OSHM2101

Package: Hang tag +PE bag Model: OSHM2102

+PE

: OSHM2102

Package: Hang tag +PE bag +PE

Product name: Tail Screw Set(Green) : --

Product name: Canopy Set(Yellow) : --



: M2-EXP 

: M2-EXP

Model: OSHM2103 : OSHM2103

Package: Hang tag +PE bag +PE

Product name: Canopy Set(Charm Orange) : --



: M2-EXP

Model: OSHM2104 : OSHM2104

Package: Hang tag +PE bag +PE

Product name: Tail Motor Set(Orange) : -()

6

: M2-EXP



M1.6*3=3PCS

Model: OSHM2105 : OSHM2105

Package: Hang tag +PE bag +PE

Product name: Main Motor Set(Miami Blue) :-()



: M2-EXP

Model: OSHM2106 : OSHM2106

Package: Hang tag +PE bag +PE

Product name: 175mm Main Blades(Green) : 175-()

: M2-EXP

Model: OSHM2107 : OSHM2107

Package: Hang tag +PE bag +PE

Product name: 175mm Main Blades(Orange) : 175-()

: M2-EXP

Model: OSHM2108 : OSHM2108

Package: Hang tag +PE bag +PE

Product name:175mm Main Blades(Yellow) : 175-()

: M2-EXP

M2.5*7=3PCS

Model: OSHM2109 : OSHM2109

Package: Hang tag +PE bag +PE

Product name: Ball Bearing Group (MR63) : 

3*6*2

: M2-EXP

Model: OSHM2110 : OSHP2110

Package: Hang tag +PE bag +PE
M2*6=2PCS

Product name: Screw Kit Set : -EXP

: M2-EXP

Model: OSHM2111 : OSHM2111

Package: Hang tag +PE bag +PE

Product name: Swash plate set --EXP : -EXP

: M2-EXP

M1.6*6=6PCS ST1.7*8=2PCS

ST1.7*4=8PCS

M2*12=4PCS M2*10-L4=1PCS

M1.6*4=17PCS

M2*4=2PCS M1.6*3=2PCS

M1.2*10=4PCS

ST1.7*6=2PCS

M1.6=3PCS



M3*2=1PCS

M2*10-L2.5=2PCS M2.5*7=3PCS

M1.6*3=21PCS

M2=3PCS

M1.6*8=4PCS

Model: OSHM2112 : OSHM2112

Package: Hang tag +PE bag +PE

Product name: Fuselage Baseplate Set : 

: M2-EXP

Model: OSHM2113 : OSHM2113
Product name: Flight control : 

1 PCS

0.8mm

Package: Hang tag +PE bag +PE
: M2-EXP M2-2020

Model: OSHM2114 : OSHM2114
Product name: Control receiver : 

Package: Hang tag +PE bag +PE
: M2-EXP M2-2020

Model: OSHM2115 : OSHM2115

Package: Hang tag +PE bag +PE

Product name: Canopy Fixed Bolt Set-EXP : -EXP

: M2-EXP



M2.5

Model: OSHM2116 : OSHM2116

Package: Hang tag +PE bag +PE

Product name: Flight Control Housing Set : 

: M2-EXP M2-2020

Model: OSHM2117 : OSHM2117

Package: Hang tag +PE bag +PE

Product name: Main Motor Mount Set :

: M2-EXP

Model: OSHM2129 : OSHM2129

Package: Hang tag +PE bag +PE

Product name: Main Rotor Holder Screw group -EXP :-EXP

: M2-EXP

Model: OSHM2129 : OSHM2129

Package: Hang tag +PE bag +PE

Product name: Main Rotor Holder -EXP :-EXP

: M2-EXP

 2PCS

EN

Model: OSHM2130 : OSHM2130

Package: Hang tag +PE bag +PE

Product name: Plastic Swash plate outer disc-EXP :-EXP

: M2-EXP

 1PCS

20

WWW.OMPHOBBY.COM

Spare parts picture-3 -3

Model: OSHM2002 : OSHM2002

Package: Hang tag +PE bag +PE

Product name: Feathering shaft set : 

: M2-EXP M2-2020

Model: OSHM2005 : OSHM2005
Product name: Thrust Bearing :

Package: Hang tag +PE bag +PE
: M2-EXP M2-2020

Model: OSHM2008 : OSHM2008

Package: Hang tag +PE bag +PE

Product name: FBL Pros and Cons linkage rod : 

: M2-EXP M2-2020

Model: OSHM2010 : OSHM2010

Package: Hang tag +PE bag +PE

Product name: Metal Main Rotor Housing set : 

: M2-EXP M2-2020

Ø2xØ5x0.2mm M2x6mm

Model: OSHM2011 : OSHM2011

Package: Hang tag +PE bag +PE

Product name: 4 main Shaft Set : 

: M2-EXP M2-2020

Model: OSHM2014 : OSHM2014

Package: Hang tag +PE bag +PE

Product name: Servo Linkage Rod Set :



: M2-EXP M2-2020

Model: OSHM2016 : OSHM2016

Package: Hang tag +PE bag +PE

Product name: Main Motor Mount Set :

: M2-EXP M2-2020

Model: OSHM2017 : OSHM2017

Package: Hang tag +PE bag +PE

Product name: Concentricity Retention Column Set : 



: M2-EXP M2-2020

Model: OSHM2023 : OSHM2023

Package: Hang tag +PE bag +PE

Product name: Fuselage Middle Reinforcement Plate Set : 

: M2-EXP M2-2020

Model: OSHM2028 : OSHM2028

Package: Hang tag +PE bag +PE

Product name: Battery Panel Set : 

: M2-EXP M2-2020

Model: OSHM2029 : OSHM2029

Package: Hang tag +PE bag +PE

Product name: Battery Strap Set : 

: M2-EXP M2-2020

Model: OSHM2030 : OSHM2030

Package: Hang tag +PE bag +PE

Product name: Lithium Battery Set : 

: M2-EXP M2-2020

Model: OSHM2038 : OSHM2038

Package: Hang tag +PE bag +PE

Product name: Tail Screw Set(black) : -

: M2-EXP M2-2020

Model: OSHM2042 : OSHM2042

Package: Hang tag +PE bag +PE

Product name: Main Rotor Support Frame Set : 

: M2-EXP M2-2020

Model: OSHM2044 : OSHM2044
Product name: Shim Group : 

Package: Hang tag +PE bag +PE
: M2-EXP M2-2020

Model: OSHM2045 : OSHM2045

Package: Hang tag +PE bag +PE

Product name: Gross Shaft Suspension Set : 

: M2-EXP M2-2020

Model: OSHM2047 : OSHM2047

Package: Hang tag +PE bag +PE

Product name: Flanged Bearing Set(MF52ZZ) : (MF52ZZ)

: M2-EXP M2-2020

Model: OSHM2048 : OSHM2048

Package: Hang tag +PE bag +PE

Product name: Ball Bearing Group (MR63ZZ) : MR63ZZ

: M2-EXP M2-2020

Model: OSHM2049 : OSHM2049

Package: Hang tag +PE bag +PE

Product name: Ball Bearing Group (684ZZ) : 684ZZ

: M2-EXP M2-2020

Model: OSHM2050 : OSHM2050

Package: Hang tag +PE bag +PE

Product name: Ball Bearing Group (6701ZZ) : 6701ZZ

: M2-EXP M2-2020

EN

WWW.OMPHOBBY.COM

21

Spare parts picture-4 -4

Model: OSHM2052 : OSHM2052

Package: Hang tag +PE bag +PE

Product name: Flight Control Damping Shing Set : 

: M2-EXP M2-2020

Model: OSHM2053 : OSHM2053

Package: Hang tag +PE bag +PE

Product name: Battery Magic Tape Set : 

: M2-EXP M2-2020

Model: OSHM2054 : OSHM2054

Package: Hang tag +PE bag +PE

Product name: Pull Rod Head Set : 

: M2-EXP M2-2020

Model: OSHM2055 : OSHM2055

Package: Hang tag +PE bag +PE

Product name: Futaba Satellite Receiver : futaba 

60mm

: M2-EXP M2-2020

33

3 PCS

Model: OSHM2056 : OSHM2056

Package: Hang tag +PE bag +PE

Product name: OMP HOBBY T6 Remote(MODE 1) : OMP T6(MODE 1)

: M2-EXP M2-2020

Model: OSHM2057 : OSHM2057

Package: Hang tag +PE bag +PE

Product name: OMP HOBBY T6 Remote(MODE 2) : OMP T6(MODE 2)

: M2-EXP M2-2020

Model: OSHM2058 : OSHM2058

Package: Hang tag +PE bag +PE

Product name: Canopy Rubber Ring Set : 

: M2-EXP M2-2020

Model: OSHM2059 : OSHM2059

Package: Hang tag +PE bag +PE

Product name: Servo Swing Arm : 

: M2-EXP M2-2020

Model: OSHM2060 : OSHM2060

Package: Hang tag +PE bag +PE

Product name: 175mm Main Blades(Miami Blue) : 175-()

: M2-EXP M2-2020

Model: OSHM2061 : OSHM2061

Package: Hang tag +PE bag +PE

Product name:175mm Main Blades(Racing Yellow) : -()

: M2-EXP M2-2020

Model: OSHM2070 : OSHM2070
Product name: Ball Joint Set :

Package: Hang tag +PE bag +PE
: M2-EXP M2-2020

Model: OSHM2072 : OSHM2072
Product name: ESC Set : 

Package: Hang tag +PE bag +PE
: M2-EXP M2-2020

Model: OSHM2074 : OSHM2074

Package: Hang tag +PE bag Model: OSHM2075

+PE

: OSHM2075

Product name: SPEKTRUM Satellite Receiver : SPEKTRUM 

Product name: Servo Gear Set : 

: M2-E3PXCPS

: 1.5 120mm

M2-2020

Package: Hang tag +PE bag +PE
: M2-EXP M2-2020

Model: OSHM2076 : OSHM2076

Package: Hang tag +PE bag +PE

Product name: : FUTABA SBUS

: M2-E3PXCPS : 1.253PIN 60mm X 3PCS M2-2020

1.5

120


Ø0.9

     


1.25

1.25

62


Ø0.9

     


1.5

EN

22

WWW.OMPHOBBY.COM

Transmitter description-2 -2
Handle 
Charge Interface 
Coach Interface 
165

-EXPLORE
(Product Model)T6 (Diameters)L165*W98*H180 (Radio Frequency)2.413GHz--2.453 GHz (Transmit Power)< 20 dBm (Weight)345g (Modulation Mode)GFSK (Spread Spectrum Mode)FHSS (Working Voltage)3.7V (Remote Distance)800m (Charge Interface)Micro (Low Voltage Alarm)3.4V (Battery Type)Lithium Polyer Battery (Battery Capacity)2500mAh 3.7V (Coach Interface)Yes
97

180

EN

24

WWW.OMPHOBBY.COM

Memo 

-EXPLORE

EN

WWW.OMPHOBBY.COM

25

Zhuhai edge smart dirve technology Co., Ltd www.omphobby.com
2020



References

AutoCAD 2016 - 简体中文 (Simplified Chinese) 2016 (20.1s (LMS Tech)) pdfplot12.hdi 12.01.049.000