TADAR Meat Injector - Safety and User Manual

Product Overview

The TADAR meat injector is designed for injecting marinades and spices directly into the interior of meat to enhance its aroma and flavor. This product is intended for home use by adults.

1. General Safety Rules

• Before first use, thoroughly wash all parts of the injector in warm water with mild detergent, then rinse and dry.
• Store the product out of reach of children. The injector contains sharp needles that may pose a risk of injury.
• This product is not a toy.
• Check the technical condition of the product before each use.

2. Instructions for Use

Preparation:

• Select the appropriate needle (traditional or with side holes) depending on the type of meat and preferred injection method.
• Fill the syringe with marinade, using the scale for precise measurement of liquid.

Injection:

• Insert the needle into the meat to the appropriate depth.
• Slowly press the plunger, distributing the marinade evenly.
• For large pieces of meat, repeat the process in several places to ensure even distribution of spices.

After use:

• Carefully remove the needle and disassemble the injector.
• Thoroughly wash all parts in warm water with detergent, rinse, and dry before storage.
• Store the product in a dry place, out of reach of children.

3. Notes for Children, Disabled, and Elderly Users

• Children may use the product only under strict adult supervision.
• Elderly persons and people with disabilities should use the injector only if they can operate it safely or under caregiver supervision.
• Special caution is advised when handling sharp components by persons with limited manual dexterity.

Important Information

• Before use: Read the instructions and keep them for the entire period of use. If you transfer the product to another person, include the instructions.
• Proper use: Use the product only as intended.
• In case of problems: If any irregularities occur, stop using the product immediately. In case of injury, contact a doctor. Report the problem to the manufacturer or seller:
  • Phone: 61 8952300
  • E-mail: tadar@tadar.pl
  • Provide the batch or serial number and a description of the problem.
• Limitations: The product is not suitable for storing chemicals or non-food materials.
• Maintenance: Use as recommended by the manufacturer and maintain regularly to extend its lifespan.
• Warning! - The foil and packaging are not toys. Keep them out of reach of children and persons with disabilities to avoid the risk of suffocation.

Manufacturer Information

PRODUCENT: TADAR spółka z ograniczoną odpowiedzialnością sp.k.
Jasin ul. Poznańska 53 | 62-020 Swarzędz | tel.: +48 61 84 65 111
www.tadar.com.pl | tadar@tadar.pl