GBF WiFi IP Indoor Monitor MR920
User Manual
1. Install App "doordeer"
Install the "doordeer" app before setting up your indoor monitor. The app is available in the Apple App Store (for iPhone or iPad) and Google Play (for Android mobile phones).
2. Installation and Sign Up User Account
After installation, you can sign up for a user account. Choose the nearby service region for a better user experience.
The app displays a login screen where users can enter their email, password, select a region (e.g., "America Region"), and log in. Options to sign up or recover a forgotten password are also available.
3. Add Your First Indoor Monitor
The indoor monitor supports both Wi-Fi and RJ45 cable network connections.
For RJ45 Cable Connection: Ensure your router and switch support DHCP. Turn on your mobile phone's Wi-Fi setting and connect to the same network as the indoor monitor. When you click "Add Device" in the app, it will find the indoor monitor, allowing you to add it to your device list.
For Wi-Fi Connection: Navigate to the indoor monitor's Wi-Fi setting page (Settings – Wi-Fi setup). The device is ready for setup when the Wi-Fi configuration page appears. You will then find the "Setting" menu and click "Wi-Fi setting".
The screen shows a list of available Wi-Fi networks. Find your Wi-Fi name and click to connect.
Input the Wi-Fi password and click the checkmark icon [✔️] to confirm your monitor has been connected.
3.1 The Doordeer APP "LAN Search"
Open the Doordeer app and switch to the left slider bar. Click "Add Device" to add your indoor monitor.
The Doordeer APP uses "LAN Search" to find any online indoor monitors on the same network. You will see devices listed as "Monitor-hhxxxx". Click on the desired monitor and add it to your device list.
The app displays a "Searching device, please wait" message. It prompts the user to ensure their phone is connected to the same Wi-Fi network. If no device is found, it indicates the need to configure Wi-Fi.
3.2 Naming Indoor Monitor
You can assign a name to your indoor monitor. In the "SET UP PLAYLIST", select the outdoor station you want this indoor monitor to connect with. Check the box for the outdoor station to confirm your selection, then click "Confirm".
3.3 Binding Device Succeed
After selecting your outdoor station for the new indoor monitor, the app will display "Binding device succeed". Press "OK" to continue.
The app shows a list of available devices and outdoor stations, with checkboxes to select them. The "WORK MODE" can be set to "Master Monitor" or "Extension Monitor".
3.4 Indoor Monitor ICON in Doordeer APP
Once successfully added, the indoor monitor will appear as an icon in the Doordeer APP. You can press the "Settings" icon [⚙️] to change settings such as renaming the monitor or selecting a second outdoor station.
4. Choose Doorbell(s) to Bind
Click the "Setting" button on the Monitor, then click "Playlist".
During the indoor monitor addition process, you can select different outdoor stations or multiple door stations from the device list to bind with the indoor monitor. Ensure the desired devices are checked.
5. Indoor Monitor UI Introduction
After being added to the app, the indoor monitor will automatically reboot and update the system, which may take up to 10 minutes.
The main interface of the indoor monitor displays several sections:
- moments: For cloud record activities and SD card record.
- Live: For real-time monitor and unlocking.
- Settings: To switch to Wi-Fi setup mode or adjust ringtones.
6. Basic Settings
You can set up ringtones and switch to Wi-Fi setup mode. The system also supports 12-24 hours mode selection.
The "Settings" menu includes options for "Wi-Fi setting", "Device List", "Ring tone setting", and "AM-PM or 24hours".
7. Cloud & SD Card Record Playback
Click the "moments" button to play back activities recorded in the cloud or on the SD card. The playback interface shows recorded events with timestamps, associated data (like phone numbers or codes), and playback controls.
8. Live Monitor and Unlocking
The Doordeer indoor monitor supports up to 4 channels of live video simultaneously. To view more detail, you can enlarge a specific video feed by single-clicking its window.
The screen displays multiple live video feeds from different cameras, each with a timestamp.
9. Calling, Talking, and Unlocking
When a visitor presses your room number or name on an outdoor station, the indoor monitor will display the video from the door station camera and send a ringing notification. You can answer the visitor, talk, and unlock the door directly from this indoor monitor.
10. Adding Second Indoor Monitor
Adding a second indoor monitor in a multi-unit house is similar to adding the first one via your smartphone. Refer to steps 3.1-3.3. In step 3.3, when naming the indoor monitor, set the "Work Mode" to "Extension Monitor" and link it to your first indoor monitor (Master monitor). This setup applies to third or fourth indoor monitors as well.
Tips and FAQs
A. Before Adding Your First Indoor Monitor
You need at least one door station added to your doordeer app account. Then, you can bind one or multiple door stations with your indoor monitor or multiple indoor monitors.
B. During Adding This Indoor Monitor to Your Smart Phone
Please ensure your smartphone's Bluetooth and Cellular Data are turned off when connecting via Wi-Fi to your local Wi-Fi connection.
C. Can Indoor Monitor Work with LAN Without Internet?
Yes. When the indoor monitor and door station are on the same local network (LAN), they can function together. Your mobile phone will not receive a push notification if the LAN does not connect to the internet.
D. Is There a Reset Button on the Indoor Monitor?
Yes, you can reset the indoor monitor to factory default settings by pressing the reset button on the back. You will hear one "dingdong" sound after pressing and holding the reset button.
GBF Electronics Inc. Customer Support
Phone: 1-604-278 6896 or 1-604-285 8721
Email: info@gbfelectronics.com
