Assembly and Installation Instructions
WARNING: TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.
Before You Begin:
- Ensure power is turned off at the circuit breaker before installation.
- Read all instructions carefully.
- Installation should be performed by a qualified electrician if you are unfamiliar with wiring.
Step-by-Step Installation:
A diagram illustrates the installation process with numbered steps.
- Secure the mounting plate to the ceiling using screws. Ensure it is firmly attached to a structural support for stability.
- Connect the live wire, neutral wire, and ground wire of the light to the corresponding wires in the junction box.
- Lift the fixture upward and align its holes with those on the mounting plate.
- Fasten the fixture to the mounting plate using the included screws. Ensure the fixture is securely attached and stable.
Safety Instructions:
To avoid fire, shock, and serious personal injury, follow all instructions carefully.
- Do not install or use the light fixture if any part is missing or damaged.
- To avoid possible electrical shock be sure electricity is turned off at the main fuse or circuit breaker box before wiring.
- Make certain no bare wires are exposed outside the wire connectors.
- All wiring must conform to national and local electrical codes.
- Follow the recommended instructions for the proper method of wiring your new light fixture. If you feel you do not have enough electrical wiring knowledge or experience, have your light fixture installed by a licensed electrician. Any electrical work not described in this manual should be performed by a licensed electrician.
