SEHMUA L1 Light Bulb Camera Quick Start Guide

What's Included

This package contains the SEHMUA Light Bulb Camera. Key components and features include:

Caution: Please insert the Micro SD Card according to the diagram. Incorrect insertion may cause the card to jam and damage the device.

Table of Contents

  1. What's Included
  2. Product Overview
  3. App Installation and Setup
  4. Register an Account
  5. Set up WiFi for the Camera
  6. FAQ
  7. Notification Compliance

Product Overview

The SEHMUA Light Bulb Camera is designed for easy installation and monitoring. It features a camera bulb with a lens, spotlights, infrared LEDs for night vision, an ambient light sensor, and a microphone. It also includes a reset button and a Micro SD card slot for storage.

Note: Avoid placing the camera inside a lampshade at night, as the glass may obstruct the night vision feature.

App Installation and Setup

To use the camera, you need to install the "CloudEdge" app on your smartphone.

Download the App:

[QR code for iOS app download] [QR code for Android app download]

Register an Account

Follow these steps to create your CloudEdge account:

  1. Open the CloudEdge app and navigate to the login interface. Tap "Sign Up".
  2. Sign up using your email address and tap "Next".
  3. Set a "Nickname" and "Password" for your app account, then tap "Done" to complete the registration.

Set up WiFi for the Camera

Ensure your mobile phone and camera are placed near your router, within a 5-meter distance, for optimal setup.

Important Note: The camera only supports 2.4 GHz WiFi signals. It does not support 5 GHz WiFi.

  1. Log in to the CloudEdge app. Tap the "[plus icon]" in the center to add a device. Select "Smart Camera".
  2. Reset the device. Wait for a flashing red indicator light on the camera, then tap "Next" in the app.
  3. Select your 2.4 GHz family Wi-Fi network and input the Wi-Fi password. Tap "Next".
  4. Hold your mobile phone with the displayed QR code in front of the camera lens, following the on-screen instructions. Proceed after hearing a prompt tone from the camera.
  5. Once network configuration is successful, set a name and password for your device. The camera will then be added successfully, and you can view the live feed.

[Diagram showing phone and camera near router, within 5 meters] [Diagram showing camera indicator light status: flashing red] [Diagram showing app screens for selecting Wi-Fi, entering password, and scanning QR code]

FAQ

Q: The device prompts offline?
  • Check if the device is powered on.
  • Verify the Wi-Fi network is stable; restart your router if necessary.
  • If the camera is far from the router, consider moving the router closer or using a Wi-Fi amplifier.
  • Delete the camera from your CloudEdge account, reset the device, and add it again.
  • Ensure both the device firmware and the app are updated to the latest versions.
Q: Why is it still in the list of devices after resetting?
Resetting the device only restores network configurations, not app configurations. The camera must be explicitly removed from the App to be fully disconnected.
Q: How to connect the camera to another router?
First, remove and reset the device in the App, then reconfigure it with the new router's details through the App.
Q: Why doesn't the device identify the SD card?
  • It is recommended to insert the SD card after powering off the device.
  • Confirm the SD card is functional and formatted as FAT32.
  • A poor internet connection may also prevent the SD card from being recognized.
Q: Why can't I get notifications on my cell phone App?
  • Ensure the CloudEdge app is running on your phone and that notification functions are enabled within the app.
  • Verify that message notifications and relevant permissions are enabled in your phone's system settings.

Notification Compliance

FCC Compliance Statement

FCC WARNING: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC ID: 2AZUX-L1

FCC RADIATION EXPOSURE STATEMENT: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

CE Compliance

This device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.

Correct Disposal of This Product

This symbol [recycling symbol] indicates that the product must not be discarded as household waste. It should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling help protect natural resources, human health, and the environment. For more information, contact your local municipality, disposal service, or the retailer.

Models: B0BW46W8L9, B0BPY98655, L1 2K Light Bulb Security Camera, 2K Light Bulb Security Camera, Light Bulb Security Camera, Bulb Security Camera, Camera

PDF preview unavailable. Download the PDF instead.

B1aMFgbc-NL Corel PDF Engine Version 18.1.0.661 CorelDRAW X8

Related Documents

Preview RBX-S40 Pan Tilt Solar Powered Security Camera User Manual
Comprehensive user manual for the SEHMUA RBX-S40 Pan Tilt Solar Powered Security Camera. Learn about setup, app pairing, installation, device settings, and troubleshooting.
Preview SEHMUA RBX-SD200 Pan Tilt Solar Powered Security Camera User Manual
Comprehensive user manual for the SEHMUA RBX-SD200 Pan Tilt Solar Powered Security Camera, covering product introduction, app setup and functions, mounting instructions, FAQs, and compliance information.
Preview SEHMUA 4G LTE Cellular Solar Security Camera Owner's Guide
Owner's guide for the SEHMUA 4G LTE Cellular Solar Security Camera, detailing its specifications, features like 2K color night vision, 2-way audio, PIR detection, solar power, weatherproof design, and connectivity options.
Preview SEHMUA 4G LTE Pan Tilt Security Camera S40 User Manual
User manual for the SEHMUA S40 4G LTE Pan Tilt Security Camera, covering product introduction, app setup, functions, mounting instructions, FAQs, and compliance information.
Preview SEHMUA RBX-H10 4G LTE Cellular Trail Camera User Manual
Comprehensive user manual for the SEHMUA RBX-H10 4G LTE Cellular Trail Camera, covering setup, app functions, installation, troubleshooting, and compliance information.
Preview 4G LTE Cellular Trail Camera RBX-H10 User Manual | Setup, Features, and Troubleshooting
Comprehensive user manual for the Sehmua RBX-H10 4G LTE Cellular Trail Camera. Learn about setup, app functions, installation, FAQs, and compliance.
Preview SEHMUA RBX-SD200 4G LTE Pan Tilt Security Camera User Manual
User manual for the SEHMUA RBX-SD200 4G LTE Pan Tilt Security Camera. This guide provides instructions on setup, app functions, mounting, and troubleshooting for enhanced home security.
Preview SEHMUA RBX-H10 4G LTE Cellular Trail Camera User Manual
Comprehensive user manual for the SEHMUA RBX-H10 4G LTE Cellular Trail Camera, covering setup, app functions, installation, troubleshooting, and compliance information.