Dripex Basketball Hoop Installation Instructions
Model: Dripex Basketball Hoop Outdoor 10FT Adjustable Height Goal
Safety Instructions
- For extra stability, place bags of sand on the base, especially in windy conditions.
- Do not place hard or sharp objects on the base, and do not step on it to avoid damage.
- Move the basketball hoop to a safe place during strong winds.
- Check the base's weight and screw fastenings before use to prevent accidents.
- Two or more adults are recommended for installation. Children should not install or climb the hoop.
- Ensure the base is not leaking before use, as even small leaks can cause instability.
- This product is for leisure and entertainment; avoid strong dunks and hangs.
- Fill the base with water or sand immediately after installation and place it on level ground.
Parts List
| Part ID | Name | Quantity | Note |
|---|---|---|---|
| B1, B2, B3 | Screw, M8 X 35MM | 2 | Connect backboard, hoop, and backboard bracket |
| B4, B5, B6, B7 | Screw with spring, M8 X 10MM | 2 | Connect backboard, hoop, and backboard bracket |
| C1, C2 | Screw, M8 X 16MM | 2 | Fix the backboard bracket to the backboard |
| D1, D2, D3 | Screw, M8 X 20MM | 2 | Connect the base and base support rod |
| E1, E2, E3 | Screw, M8 X 90MM | 1 | Connect the bottom pole Y and the base support rod |
| F1, F2, F3 | Screw, M8 X 85MM | 6 | Connect the top pole W and middle pole X |
| G | Wheel | 2 | |
| H | Top pole cover | 1 | Usually H (cover) is already in the top pole W |
| I | Base water injection hole cover | 1 | Usually I (base cover) is already in the Base |
| J | Basketball rim | 1 | |
| K | Backboard bracket | 1 | |
| L | Net | 1 | |
| M | Backboard | 1 | |
| U1 | Base support rod (right side) | 1 | |
| U2 | Base support rod (left side) | 1 | |
| O | Wheel pin | 1 | |
| W | Top pole | 1 | |
| X | Middle pole | 1 | |
| Y | Bottom pole | 1 | |
| S | Base | 1 |
Installation Steps
- Pole Assembly: Insert the necked part of the bottom pole (Y) into the bottom part of the middle pole (X). Secure with two screws (F). Insert the assembled middle pole (X) into the top pole (W) and fix with two screws (F). Note: For bracket (K) installation, refer to the arrow direction to turn the 'II' type part into a 'Y' type. A YouTube video is available for assistance: https://youtu.be/mEircmKGLco
- Wheel Attachment: Use the wheel pin (O) to pass through the wheel (G), base (S), and bottom pole (Y) in sequence.
- Base Support Rods: Attach the support rods (U1, U2) to the bottom pole (Y) using screws (E). Connect the support rods to the base (S) using screws (D). Ensure correct orientation of the support rods.
- Backboard, Hoop, and Bracket Assembly: Connect the basketball rim (J), backboard (M), and bracket (K) using screws (B1, B2, B3). Ensure the spring-loaded screws (B4, B5, B6, B7) are used for the two upper holes of the basketball rim.
- Bracket to Backboard: Connect the top of the bracket (K) to the backboard (M) using screws (C1, C2) and tighten.
- Final Pole Attachment: Attach the top pole (W) to the bracket (K) using screws (F1, F2, F3).
Installation Reminder:
- Check all accessories and read instructions carefully before installation.
- Two adults and two adjustable wrenches are recommended.
- Support the basketball hoop with objects during assembly if needed.
- For outdoor use, cover the main and lifting poles with plastic covers to prevent water damage.
- Remove jewelry (watches, necklaces, earrings) before use to prevent entanglement.
- Keep fingers away from moving parts when adjusting height.
- Children should not move or adjust the product's height.
Height Adjustment
The top pole has several holes at different heights. Place the basketball rim at the desired height and install the screws (F) accordingly.
Minimum Height: 4.4FT (without middle pole).
Base Filling
- Water: Fill the base with water through the injection hole.
- Sand: If the product will not be moved frequently, sand is recommended over water, especially in freezing temperatures, to prevent base damage. Note that sand cannot be easily removed once placed in the base.
Warnings
- Warning: For your safety, do not violently dunk or hang on the hoop, backboard, bracket, or net.
- Do not use products with potential safety hazards. Contact after-sales personnel or local dealers for repairs or replacements.
- Exercise special care when moving on uneven ground to avoid damaging the product.
- If the temperature is below 0°C, empty the base or fill it with sand to prevent freezing damage.
Contact Information
For assembly problems or to request replacement parts, please contact Dripex at: DXaftersaleservice@outlook.com. Please include your Order ID.
