SP3609 MVMT BT Speaker User Manual

Product Diagram

The speaker features the following components:

• 1. LED indicator
• 2. DC in slot
• 3. TF in slot
• 4. Aux in slot
• 5. MIC

KEY Press-control Diagram

The speaker has five control buttons:

1. Short Press: Previous Song
   Long Press: Volume Decrease
2. Short Press: To select Bluetooth / FM
   Long Press: To select FM Channels (Automatically selects channels when in FM mode) / Disconnect Bluetooth
3. Short Press: Play/Pause / Answer call / End call
   Long Press (3 seconds): Power on/Power off
   Long Press: Reject call (2 seconds)
   Long Press (10 seconds): Reset
   Press Twice: TWS Turn On/Turn Off
4. Short Press: Light Mode (9 modes)
   Press Twice: Light On/Off
5. Short Press: Next Song
   Long Press: Volume Increase

How to Charge

1. Connect the USB cable to the DC slot and the other end to a 5V/2A phone charger.
2. A red light on the back indicates charging. The light turns off when fully charged.
3. Charging takes approximately 3 hours (may take longer when charging from a computer).
4. Unplug the USB charging cable after charging to prevent battery deterioration.

Functions to Understand

LED Indicator

• RED: On during charge, Off when fully charged.
• BLUE: Flashes fast continuously when waiting to pair Bluetooth or searching FM Channels. Remains constantly On after pairing or when FM channels are fully searched. Flashes slowly while playing music via Bluetooth, TF card, FM Radio, or AUX.

How to Connect the Mobile Phone

1. Power on the speaker; the Blue LED will flash continuously.
2. Turn on your phone's Bluetooth, search for "MV_SP3609", and connect/pair.
3. The speaker has memory function for pairing. To pair with a different phone, disconnect the previously paired phone's Bluetooth first.
4. After pairing, the Blue LED flashes slowly.

Hands-free Function for SPEAKER

• Short press the button to answer or end a phone call.
• Long Press the button for 2 seconds to reject a phone call.

How to Connect Same Second Speaker using TWS Mode

1. Turn on two speakers. Select Bluetooth mode and double-click the speaker button on one unit. It will automatically search for the other speaker. A prompt sound will indicate a successful connection. In TWS mode, both speakers play the same song simultaneously.
2. The host speaker's Blue LED will flash fast, and the second speaker's Blue LED will be steady, indicating successful pairing. Both speakers will automatically convert to Left & Right sound channels.

NOTE:

• TWS mode requires two speakers of the same model (MV_SP3609).
• Before selecting TWS mode, the speaker might not connect to other Bluetooth devices.
• To disconnect TWS mode, double-click the button on either speaker.
• The speaker remembers TWS pairing and will automatically connect with the original paired speakers when turned on.
• Turning off one speaker in TWS mode will also turn off the other.

How to use AUX in (External Audio Input)

Turn on the speaker. Insert a 3.5mm audio jack into the speaker's AUX input and the other end into a mobile or computer headphone output. Press the "M" button to switch to AUX mode.

How to use TF card

1. Turn on the speaker and insert a music TF card into the TF Slot. The speaker will automatically select TF Mode and start playing music files.
2. The TF slot supports MP3 and WAV file formats.
3. The TF Slot supports a maximum of 32GB TF Cards.

How to use FM Radio

Press the "M" button to select FM Radio mode. Insert a 3.5mm AUX cable to act as an FM antenna. Long press the "M" button to automatically search for FM Channels.

Energy Saving Auto Mode

• The speaker may shut down automatically after 2 hours of waiting to pair in Bluetooth mode.
• The speaker may shut down automatically after half an hour if the TF Card / Radio / AUX mode is suspended or disconnected.

Charging Note

1. Use a certified charger.
2. The charging voltage is 5V. Use only 5V chargers compatible with the speaker, as higher voltages may damage internal components.
3. When the battery is low, a prompt sound will be heard. Charge the speaker promptly using a computer USB port or a 5V-2A mobile phone charger. The red light on the back indicates charging and turns off when fully charged.

Charging time & playing time

Troubleshooting

1. Multiple Pairing Failed:
   A. Reboot for pairing.
   B. Too many Bluetooth speakers surrounding the MV_SP3609 may make searching difficult. Turn off other devices.
2. Sound too Low or Distorted:
   A. Battery is too LOW.
   B. Increase the Volume.
3. Bluetooth Music stops Suddenly:
   A. Check the connection distance between the mobile and speaker (under 10 meters).
   B. Wall obstruction between the mobile and speaker.
4. In case of crash: Long press the button for 10 seconds to reset.
5. In TWS mode: The secondary speaker will automatically shut down when the power is low; recharge before use.

Product Specification

• Product name: MVMT BT Speaker
• Speaker Model No.: SP3609
• Bluetooth Pairing name: MV_SP3609
• Bluetooth solution: Bluetrum
• Voltage: DC5V 2A
• Bluetooth version: 5.4
• Transmission distance: ≤10 m
• Speaker size: 1.5 inch
• Rated output power: 3W*2
• Battery capacity: 1200mAh
• Charging time: around 3 hours
• Playing time: around 3-5 hours
• USB charging cable length: around 50CM
• Product size: 178*52*120MM (L*W*H)
• Product weight: around 320 g
• Accessory: charging cable

FCC STATEMENT:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF warning statement:

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.