Manuals+

Dakota Micro 3rd Party Adaptor Monitor Guide

This guide provides information on Dakota Micro's 3rd party adaptor monitors for various agricultural equipment brands.

AGCO (Massey, AGCO, Challenger & Gleaner Monitors)

Monitor Type Video Capability Video Format # of Video Inputs Monitor Photo (front) Monitor Photo (rear) Arrows indicate video inputs AgCam Adaptor P/N OverView Adaptor P/N
Factory Installed C2100 Console (Combines Only) Video Capable PAL 1-2

[Monitor Image: C2100 Console Front]

[Monitor Image: C2100 Console Rear with Arrows]

 BUSB1 & BCOMB4C N/A (Requires PAL Camera)
2012 & 2013 Challenger, Massey & Gleaner Combines (ALL "C" Serial Numbers) Video Capable PAL 1-2

[Monitor Image: Challenger/Massey/Gleaner Monitor Front]

[Monitor Image: Challenger/Massey/Gleaner Monitor Rear with Arrows]

 BUSB1-TC N/A (Requires PAL Camera)
C2100 Console (All Others) Video Capable PAL 1-2

[Monitor Image: C2100 Console Front]

[Monitor Image: C2100 Console Rear with Arrows]

 BUSB1-TC N/A (Requires PAL Camera)
C3000 Console White Planters Video Capable PAL 1-2

[Monitor Image: C3000 Console Front]

[Monitor Image: C3000 Console Rear with Arrows]

 BUSB1-TC N/A (Requires PAL Camera)
C2000 Console 2
2009 Challenger
2009 Massey
2009 Gleaner
(ALL "U" Serial Numbers)
C1000		 Video Capable PAL 1-2

[Monitor Image: C2000 Console 2 Front]

[Monitor Image: C2000 Console 2 Rear with Arrows]

 AC-A2C N/A (Requires PAL Camera)
Model Year 2010/11 MF 8600 Series AGCO DT-B Series Challenger C-series Video Capable PAL 1

[Monitor Image: MF 8600 Series Monitor Front]

[Monitor Image: MF 8600 Series Monitor Rear with Arrows]

 AC-A1C N/A (Requires PAL Camera)
GTA/Console 1
Massey 6400/7400/8400
AGCO DTA/RTA
Challenger B-Series 500/600		 Video Enabled Models ONLY (check back of monitor for video input) PAL 1

[Monitor Image: GTA/Console 1 Front]

[Monitor Image: GTA/Console 1 Rear with Video Input Connector]

 AC-GTA N/A (Requires PAL Camera)

AgLeader Monitors

Monitor Type Video Capability Video Format # of Video Inputs Monitor Photo (front) Monitor Photo (rear) Arrows indicate video inputs AgCam Adaptor P/N OverView Adaptor & Camera kit P/N
Versa Video Capable PAL/NTSC 1-4

[Monitor Image: AgLeader Versa Front]

[Monitor Image: AgLeader Versa Rear with Arrows]

 DMAC-ALI DMOV-ALI
Integra Video Capable PAL/NTSC 1-4

[Monitor Image: AgLeader Integra Front]

[Monitor Image: AgLeader Integra Rear with Arrows]

 DMAC-ALI DMOV-ALI
InSight NOT Video Capable N/A NONE

[Monitor Image: AgLeader InSight Front]
Edge NOT Video Capable N/A NONE

[Monitor Image: AgLeader Edge Front]

ASA (Audiovox) Monitors

Monitor Type Video Capability Video Format # of Video Inputs Monitor Photo (front) Monitor Input connector Photo AgCam Adaptor P/N OverView Adaptor P/N
Voyager Video Capable NTSC/PAL 1-4

[Monitor Image: ASA Voyager Front]

[Monitor Image: ASA Voyager Connector Photo]

 DMAC-ADVX-M Not available at this time

A&I (CabCam) Monitors

Monitor Type Video Capability Video Format # of Video Inputs Monitor Photo (front) Monitor Input connector Photo AgCam Adaptor P/N OverView Adaptor P/N
OverView & Other Misc. Imports Video Capable NTSC 1-4

[Monitor Image: A&I CabCam Front]

[Monitor Image: A&I CabCam Connector Photo]

 DMAC-OVM None needed, same adaptor
CabCam (all styles) Video Capable NTSC 1-4

[Monitor Image: A&I CabCam Front]

[Monitor Image: A&I CabCam Connector Photo]

 DMAC-OVM None needed, same adaptor

Case IH Monitors

(Single camera adaptors use BNC indicated w/ red arrow on rear of unit. 3 camera adaptors use BNC & 2 terminals in the 26-pin connector)

Monitor Type Video Capability Video Format # of Video Inputs Monitor Photo (front) Monitor Photo (rear) Arrows indicate video inputs AgCam Adaptor P/N OverView Adaptor & Camera kit P/N
AFS 200 (Same as NH IntelliView II) Video Capable NTSC/PAL 1-3

[Monitor Image: Case IH AFS 200 Front]

[Monitor Image: Case IH AFS 200 Rear with Arrows]

 DMAC-CNH1 (single camera)
DMAC-CNH3 (three camera)		 DMOV-CNH1 (single camera)
DMOV-CNH3 (three camera)
AFS Pro 600 (same as NH IntelliView Plus II) NOT Video Capable N/A NONE

[Monitor Image: Case IH AFS Pro 600 Front]
AFS Pro 300 (same as NH IntelliView III) Video Capable NTSC/PAL 1-3

[Monitor Image: Case IH AFS Pro 300 Front]

[Monitor Image: Case IH AFS Pro 300 Rear with Arrows]

 DMAC-CNH1 (single camera)
DMAC-CNH3 (three camera)		 DMOV-CNH1 (single camera)
DMOV-CNH3 (three camera)
AFS Pro 700 (same as NH IntelliView IV) Video Capable NTSC/PAL 1-3

[Monitor Image: Case IH AFS Pro 700 Front]

[Monitor Image: Case IH AFS Pro 700 Rear with Arrows]

 DMAC-CNH1 (single camera)
DMAC-CNH3 (three camera)		 DMOV-CNH1 (single camera)
DMOV-CNH3 (three camera)

Dakota Micro, Inc. Monitors

Monitor Type Video Capability Video Format # of Video Inputs Monitor Photo (front) Monitor Photo (rear) Arrows indicate video inputs AgCam Adaptor P/N OverView Adaptor P/N
AgCam 7", 7" Quad, 9" or 9" Quad Monitor Video Capable NTSC/PAL 1-4

[Monitor Image: Dakota Micro AgCam Monitor Front]

 via video input harness No adaptor needed, uses AgCam connectors DMAC-OVC
OverView 7" or 7" Quad monitor (Same connectors as CabCam) Video Capable NTSC/PAL 1-4

[Monitor Image: Dakota Micro OverView Monitor Front]

 via video input harness DMAC-OVM No adaptor needed, uses OverView connectors

DICKEY-john Monitors

Monitor Type Video Capability Video Format # of Video Inputs Monitor Photo (front) Monitor Photo (rear) Arrows indicate video inputs AgCam Adaptor P/N OverView Adaptor P/N
IntelliAg 10" VT Video Capable PAL 1-2

[Monitor Image: DICKEY-john IntelliAg 10" VT Front]

[Monitor Image: DICKEY-john IntelliAg 10" VT Rear with Video Input Connector]

 AC-A2C N/A (Requires PAL Camera)
IntelliAg 5" VT Video enabled models ONLY PAL 1

[Monitor Image: DICKEY-john IntelliAg 5" VT Front]

[Monitor Image: DICKEY-john IntelliAg 5" VT Rear with Video Input Connector]

 AC-GTA N/A (Requires PAL Camera)

Fendt Monitors

Monitor Type Video Capability Video Format # of Video Inputs Monitor Photo (front) Monitor Photo (rear) Arrows indicate video inputs AgCam Adaptor P/N OverView Adaptor P/N
VarioTerminal 10.4" Tier 4i 700, 800 & 900 Series (10.4" standard, 7" below is optional on this series tractor) Video Capable NTSC/PAL 1-2

[Monitor Image: Fendt VarioTerminal 10.4" Front]

 Connectors on back of arm rest AC-FDT01 DMAC-OVC
VarioTerminal 7" Tier 4i 700 Series (7" standard, 10.4" above is optional on this series tractor) NOT Video Capable None N/A

[Monitor Image: Fendt VarioTerminal 7" Front]
VarioTerminal 5" 900 Series Tier 3 (red wheel) NOT Video Capable None N/A

[Monitor Image: Fendt VarioTerminal 5" Front]
VarioTerminal 700/800 Tier 3 900 Tier 2 (silver wheel) Needs camera kit installed. Displays black & white only PAL 1

[Monitor Image: Fendt VarioTerminal 700/800/900 Front]

 Connectors on back of arm rest AC-FDT01 DMAC-OVC

FW Murphy Monitors

Monitor Type Video Capability Video Format # of Video Inputs Monitor Photo (front) Monitor Photo (rear) Arrows indicate video inputs AgCam Adaptor P/N OverView Adaptor P/N
Powerview 750 Video Capable NTSC/PAL 1-4

[Monitor Image: FW Murphy Powerview 750 Front]

 Not Available Uses AgCam connectors DMAC-OVC

Kuhn/Spudnik Monitors

Monitor Type Video Capability Video Format # of Video Inputs Monitor Photo (front) Monitor Photo (rear) Arrows indicate video inputs AgCam Adaptor P/N OverView Adaptor P/N
CCI100 Video Capable NTSC/PAL 1

[Monitor Image: Kuhn/Spudnik CCI100 Front]

 Not Available DMAC-KH1 Not available at this time

John Deere Monitors

Monitor Type Video Capability Video Format # of Video Inputs Monitor Photo (front) Monitor Photo (rear) Arrows indicate video inputs AgCam Adaptor P/N OverView Adaptor & Camera kit P/N
GreenStar 3 2630 Video Capable NTSC/PAL 1-3

[Monitor Image: John Deere GreenStar 3 2630 Front]

[Monitor Image: John Deere GreenStar 3 2630 Rear with Arrow]

 DMAC-JD3C DMOV-JD3C
GreenStar 3 Command Center Video Capable NTSC/PAL 1

[Monitor Image: John Deere GreenStar 3 Command Center Front]

 Connector located on exterior right, rear of cab. DMAC-JDCOC DMOV-JDCOC
GreenStar 2 1800 NOT Video Capable N/A N/A

[Monitor Image: John Deere GreenStar 2 1800 Front]
GreenStar 2 2600 NOT Video Capable N/A N/A

[Monitor Image: John Deere GreenStar 2 2600 Front]

Leica

Monitor Type Video Capability Video Format # of Video Inputs Monitor Photo (front) Monitor Photo (rear) Arrows indicate video inputs AgCam Adaptor P/N OverView Adaptor P/N
Mojo3D NOT Video Capable N/A NONE Not Available

Lexion/Claas Monitors

Monitor Type Video Capability Video Format # of Video Inputs Monitor Photo (front) Monitor Photo (rear) Arrows indicate video inputs AgCam Adaptor P/N OverView Adaptor P/N
Cebis NOT Video Capable N/A NONE

[Monitor Image: Lexion/Claas Cebis Front]

Misc.

Monitor Type Video Capability Video Format # of Video Inputs Monitor Photo (front) Monitor Photo (rear) Arrows indicate video inputs AgCam Adaptor P/N OverView Adaptor P/N
Television/VCR Video Capable NTSC/PAL (depends upon model) Varies

[Monitor Image: Television/VCR Front]

 Connector features Male RCA & power DMAC-TVA Not available at this time
Computer Video Capable NTSC/PAL Varies

[Monitor Image: Computer Front]

 Connector features USB plug DMAC-2USB Not available at this time
DVR (short distances) Video Capable NTSC/PAL Varies

[Monitor Image: DVR (short distances) Front]

 Connector features BNC Female & separate power DMAC-DVR-P DMOV-DVR-P
DVR (long distances over CAT5) Video Capable NTSC/PAL Varies

[Monitor Image: DVR (long distances over CAT5) Front]

 Connector features CAT5 plug DMAC-BO24-F (female) & DMAC-BO24-M (male) Not available at this time

Surveillance System

Monitor Type Video Capability Video Format # of Video Inputs Monitor Photo (front) Monitor Photo (rear) Arrows indicate video inputs AgCam Adaptor P/N OverView Adaptor P/N
(Security system camera into DM system) Video Capable NTSC/PAL Varies Misc. Connector features BNC Male DMAC-SCA Not available at this time
(DM Camera into existing security system) Video Capable NTSC/PAL Varies Misc. Connector Features BNC Male & separate Power DMAC-SSA Not available at this time

Mueller Monitors

Monitor Type Video Capability Video Format # of Video Inputs Monitor Photo (front) Monitor Photo (rear) Arrows indicate video inputs AgCam Adaptor P/N OverView Adaptor P/N
Basic Terminal TOP Video Capable PAL 2

[Monitor Image: Mueller Basic Terminal TOP Front]

 N/A DMAC-MLR01 (Note: The connector is the same as Fendt, but the pin-out is different, and they are not interchangeable) N/A (Requires PAL Camera)

New Holland Monitors

(Single camera adaptors use BNC indicated w/ red arrow on rear of unit. 3 camera adaptors use BNC & 2 terminals in the 26-pin connector)

Monitor Type Video Capability Video Format # of Video Inputs Monitor Photo (front) Monitor Photo (rear) Arrows indicate video inputs AgCam Adaptor P/N OverView Adaptor & Camera kit P/N
IntelliView II (same as Case IH AFS 200) Video Capable NTSC/PAL 1-3

[Monitor Image: New Holland IntelliView II Front]

[Monitor Image: New Holland IntelliView II Rear with Arrows]

 DMAC-CNH1 (single camera)
DMAC-CNH3 (three camera)		 DMOV-CNH1 (single camera)
DMOV-CNH3 (three camera)
IntelliView Plus II (same as Case IH AFS Pro 600) NOT Video Capable N/A NONE

[Monitor Image: New Holland IntelliView Plus II Front]
IntelliView III (same as Case IH AFS Pro 300) Video Capable NTSC/PAL 1-3

[Monitor Image: New Holland IntelliView III Front]

[Monitor Image: New Holland IntelliView III Rear with Arrows]

 DMAC-CNH1 (single camera)
DMAC-CNH3 (three camera)		 DMOV-CNH1 (single camera)
DMOV-CNH3 (three camera)
IntelliView IV (same as Case IH AFS Pro 700) Video Capable NTSC/PAL 1-3

[Monitor Image: New Holland IntelliView IV Front]

[Monitor Image: New Holland IntelliView IV Rear with Arrows]

 DMAC-CNH1 (single camera)
DMAC-CNH3 (three camera)		 DMOV-CNH1 (single camera)
DMOV-CNH3 (three camera)

Outback/AgJunction (formerly Hemisphere) GPS Monitors

Monitor Type Video Capability Video Format # of Video Inputs Monitor Photo (front) Monitor Photo (rear) Arrows indicate video inputs AgCam Adaptor P/N OverView Adaptor P/N
Outback Max Video Capable NTSC/PAL 4

[Monitor Image: Outback Max Front]

 N/A Cable Sold by Hemisphere, Part Number: 051-0285-000 Outback Adaptor cable + OverView conversion cable: PN: DMAC-OVC
Outback STS NOT Video Capable N/A NONE

[Monitor Image: Outback STS Front]
Outback S3 NOT Video Capable N/A NONE

[Monitor Image: Outback S3 Front]

Raven Monitors

Monitor Type Video Capability Video Format # of Video Inputs Monitor Photo (front) Monitor Photo (rear) Arrows indicate video inputs AgCam Adaptor P/N OverView Adaptor P/N
Raven Viper 4 Video Capable NTSC/PAL 1-4

[Monitor Image: Raven Viper 4 Front]

[Monitor Image: Raven Viper 4 Rear with Arrows]

 Raven Adaptor Cable PN: 11150172077 Raven Adaptor cable + OverView conversion cable: PN: DMAC-OVC
Viper / Viper Pro NOT Video Capable N/A NONE

[Monitor Image: Raven Viper/Viper Pro Front]
Envizio / Envizio Pro NOT Video Capable N/A NONE

[Monitor Image: Raven Envizio/Envizio Pro Front]

TeeJet Monitors

Monitor Type Video Capability Video Format # of Video Inputs Monitor Photo (front) Monitor Photo (rear) Arrows indicate video inputs AgCam Adaptor P/N OverView Adaptor P/N
Matrix 570G Video Capable PAL/NTSC Unk

[Monitor Image: TeeJet Matrix 570G Front]

 N/A Uses AgCam connectors DMAC-OVC
Matrix 840G Video Capable PAL/NTSC Unk

[Monitor Image: TeeJet Matrix 840G Front]

 N/A Uses AgCam connectors DMAC-OVC

TOPCON Monitors

Monitor Type Video Capability Video Format # of Video Inputs Monitor Photo (front) Monitor Photo (rear) Arrows indicate video inputs AgCam Adaptor P/N OverView Adaptor P/N
X20 Video Capable PAL 1-4

[Monitor Image: TOPCON X20 Front]

[Monitor Image: TOPCON X20 Rear with Arrows]

 TOPCON adaptor PN: X20 AgCam interface N/A (Requires PAL Camera)
X30 Video Capable PAL 1-2

[Monitor Image: TOPCON X30 Front]

[Monitor Image: TOPCON X30 Rear with Arrows]

 DMAC-USB1-TC N/A (Requires PAL Camera)

Author: CNR | Revision: 07/02/13

PDF preview unavailable. Download the PDF instead.

Monitor input guide .prev Acrobat Distiller 10.1.7 (Windows)

Related Documents

Preview Dakota Micro 3rd Party Adaptor Monitor Guide
A comprehensive guide from Dakota Micro detailing AgCam and OverView adaptor compatibility for a wide range of agricultural and industrial monitors, including models from AGCO, John Deere, Case IH, Fendt, and many others.
Preview Dakota Micro 3rd Party Adaptor Monitor Guide
A comprehensive guide detailing compatible agricultural monitors from various manufacturers, including AGCO, John Deere, Fendt, and others. It lists monitor types, video capabilities, formats, input counts, and specific AgCam and OverView adaptor part numbers and connection information.
Preview Dakota Micro Monitor Input Guide: AgCam & OverView Adapter Compatibility
A comprehensive guide from Dakota Micro, Inc. detailing monitor compatibility with AgCam and OverView camera systems. Covers various agricultural brands including AGCO, John Deere, CNH, Trimble, and more, listing monitor types, video capabilities, formats, and required adapter part numbers.
Preview Dakota Micro 3rd Party Adaptor Monitor Guide
A comprehensive guide from Dakota Micro detailing 3rd party adaptor compatibility for various agricultural monitor systems, including AGCO, AgLeader, John Deere, and more, specifying AgCam and OverView adaptor part numbers.
Preview Dakota Micro Monitor Input Guide
This guide from Dakota Micro, Inc. provides essential compatibility information for various agricultural monitors from leading manufacturers such as AGCO, John Deere, CNH, AgLeader, and many others. It details video capabilities, formats, input counts, and lists specific AgCam and OverView adapter part numbers required for integration. The document helps users identify the correct camera system components for their specific tractor or implement monitors.
Preview Dakota Micro DMAC-JD2COC User Manual: AgCam/EnduraCam/RazerCam to John Deere CommandView II Cab Adapter Cable
User manual and limited warranty information for the Dakota Micro DMAC-JD2COC adapter cable, connecting AgCam, EnduraCam, and RazerCam cameras to John Deere CommandView II Cabs.
Preview Dakota Micro DMAC-ALI User Manual: Connecting AgCam Cameras to TE Connectivity
User manual for the Dakota Micro DMAC-ALI adapter cable, detailing its specifications, cable connectors, installation instructions, and consumer limited warranty for AgCam, EnduraCam, and RazerCam cameras with TE Connectivity 28-pin female connectors.
Preview Dakota Micro DMAC-TVA User Manual and Limited Warranty
User manual and consumer limited warranty for the Dakota Micro DMAC-TVA adapter cable, connecting AgCam®, EnduraCam®, and RazerCam™ cameras to RCA female inputs. Includes cable specifications, connector details, installation instructions, and warranty terms.