Dell UltraSharp U2421E Monitor
Color Calibration Factory Report
Every Dell U2421E monitor is shipped with pre-tuned standard mode(sRGB) featuring an average Delta-E of 2 or less. This ensures minimal color inconsistency or inaccuracy on screen. Enhanced grey-scale tracking provides smooth color gradation.
Factory Measurements for this Unit:
- Standard mode (sRGB)
- Avg. Delta E: ≤ 2
- Gray-Scale Tracking: [Details available in original report]
- Gamma: [Details available in original report]
Note: Calibrations are performed using Dell-approved test procedures and calibrated equipment on the factory production line. This report is specific to this Dell U2421E UltraSharp monitor. Results may differ with alternative test equipment, setups, or patterns. Please retain this report for your records, as Dell cannot reproduce or provide duplicates.
Calibration Details:
Serial No.: CN00WG2J7444572B046L | Tester: 2008L0415
Test: CA-210/CA-310 | Equipment: CA-2000S | Chroma: 2326/2235/2233
Quick Setup Guide
Follow these steps to set up your Dell UltraSharp U2421E monitor.
Step 1: Attach Stand to Monitor
Connect the monitor stand to the monitor panel. The diagram illustrates attaching the stand base to the monitor arm and securing it with a screw.
Step 2: Unpack Components
Carefully unpack the monitor and all included accessories. This typically includes the monitor panel, stand components, power cable, DisplayPort (DP) cable, and USB Type-C cables.
Step 3: Connect Cables to Computer
Connect the monitor to your computer using the provided cables. Options shown include:
- DisplayPort (DP) cable
- USB Type-C (C-C) cable
- USB Type-C (C-A) cable
The diagram shows these cables being plugged into the back of the monitor and the computer.
Step 4: Connect Laptop via USB Type-C
For a streamlined setup, connect your laptop to the monitor using a USB Type-C cable. This connection supports both display output and data transfer.
Step 5: Connect Power
Connect the monitor's power cable to the monitor and then plug it into a suitable power outlet.
Step 6: Final Connections and Cable Management
Ensure all cables are securely connected. The diagram shows the rear of the monitor with cables neatly managed.
Additional Information
For detailed product information and support, visit Dell.com/U2421E.
For customer service and support, please visit www.dell.com/contactdell.
Product Part Number: P24WV rev.A00
© 2020 Dell Inc. or its subsidiaries. All rights reserved.