Dell UltraSharp U2722D/U2722DX Quick Setup Guide and Calibration Report
Included Accessories
The following accessories are typically included with the Dell UltraSharp U2722D/U2722DX monitor:
- Monitor
- Stand components
- Power cable
- USB Type-C cable (A-C)
- DisplayPort cable
- Documentation (Quick Setup Guide, Safety and Regulatory Information)
Assembly and Setup
Follow these steps to assemble and connect your monitor:
- Unpack and Assemble Stand: Carefully unpack all components. Attach the monitor head to the stand base and riser using the provided screws.
- Connect Cables:
- Connect the power cable to the monitor and a power outlet.
- Connect the monitor to your computer using either the USB Type-C cable or the DisplayPort cable. For USB-C connection, ensure your computer supports video output over USB-C.
- Connect USB devices to the available USB-A ports on the monitor if needed.
- Power On: Press the power button on the monitor.
- Adjust Monitor: Adjust the monitor's tilt, swivel, and height for optimal viewing comfort.
Visual Description of Setup Steps:
- Step 1: Shows the monitor head being attached to the stand components.
- Step 2: Illustrates connecting various cables: DisplayPort, USB-A, and USB-C to the computer and monitor. It shows different connection scenarios for PC and laptop.
- Step 3: Depicts connecting the USB-C cable from the monitor to a laptop.
- Step 4: Shows the rear ports of the monitor and the connection of USB-A and DisplayPort cables to a computer.
- Step 5: Illustrates connecting a USB-C cable to the monitor and a laptop.
- Step 6: Shows the monitor's power button being pressed.
Factory Calibration Report
The Dell UltraSharp 27 USB-C HUB Monitor U2722D comes with factory pre-tuned sRGB and Rec.709 modes, ensuring accurate and consistent onscreen color.
Calibration Details:
- Color Accuracy: Average Delta E (ΔE) is less than 2 for both sRGB and Rec.709 modes, indicating high color accuracy.
- Grey-Scale Tracking: Tested at 32 grey levels with 10-bit color depth for smooth color graduation.
- Gamma: Set to sRGB=2.2 and Rec.709=2.4 for smooth transitions from black to white.
Test Results:
- sRGB Mode: Passed, with an average ΔE < 2.
- Rec.709 Mode: Passed, with an average ΔE < 2.
Test Equipment Used: CA-310 / Chroma2326
Serial Number: CN0Y7NWNWSSSSSL0004A464L
Support and Resources
For further assistance, documentation, and drivers, please visit:
- Dell.com/U2722D
- Dell.com/U2722DX
- For general support, visit www.dell.com/contactdell.